kernel/linux.git/drivers/net/ethernet/stmicro, branch v5.15.208

net: stmmac: fix integer underflow in chain mode

2026-04-18T08:33:37+00:00

commit 51f4e090b9f87b40c21b6daadb5c06e6c0a07b67 upstream. The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Cc: stable@vger.kernel.org Signed-off-by: Tyllis Xu Link: https://patch.msgid.link/20260401044708.1386919-1-LivelyCarpet87@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: stmmac: dwmac-loongson: Set clk_csr_i to 100-150MHz

2026-04-18T08:33:18+00:00

commit e1aa5ef892fb4fa9014a25e87b64b97347919d37 upstream. Current clk_csr_i setting of Loongson STMMAC (including LS7A1000/2000 and LS2K1000/2000/3000) are copy & paste from other drivers. In fact, Loongson STMMAC use 125MHz clocks and need 62 freq division to within 2.5MHz, meeting most PHY MDC requirement. So fix by setting clk_csr_i to 100-150MHz, otherwise some PHYs may link fail. Cc: stable@vger.kernel.org Fixes: 30bba69d7db40e7 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Hongliang Wang Signed-off-by: Huacai Chen Link: https://patch.msgid.link/20260203062901.2158236-1-chenhuacai@loongson.cn Signed-off-by: Jakub Kicinski Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman

net: stmmac: Fix error handling in VLAN add and delete paths

2026-04-18T08:33:10+00:00

[ Upstream commit 35dfedce442c4060cfe5b98368bc9643fb995716 ] stmmac_vlan_rx_add_vid() updates active_vlans and the VLAN hash register before writing the HW filter entry. If the filter write fails, it leaves a stale VID in active_vlans and the hash register. stmmac_vlan_rx_kill_vid() has the reverse problem: it clears active_vlans before removing the HW filter. On failure, the VID is gone from active_vlans but still present in the HW filter table. To fix this, reorder the operations to update the hash table first, then attempt the HW filter operation. If the HW filter fails, roll back both the active_vlans bitmap and the hash table by calling stmmac_vlan_update() again. Fixes: ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering") Signed-off-by: Ovidiu Panait Link: https://patch.msgid.link/20260303145828.7845-2-ovidiu.panait.rb@renesas.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: make sure that ptp_rate is not 0 before configuring EST

2026-02-06T15:42:04+00:00

[ Upstream commit cbefe2ffa7784525ec5d008ba87c7add19ec631a ] If the ptp_rate recorded earlier in the driver happens to be 0, this bogus value will propagate up to EST configuration, where it will trigger a division by 0. Prevent this division by 0 by adding the corresponding check and error code. Suggested-by: Maxime Chevallier Signed-off-by: Alexis Lothoré Fixes: 8572aec3d0dc ("net: stmmac: Add basic EST support for XGMAC") Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-2-d73340a794d5@bootlin.com Signed-off-by: Jakub Kicinski [ The context change is due to the commit c3f3b97238f6 ("net: stmmac: Refactor EST implementation") and the proper adoption is done. ] Signed-off-by: Rahul Sharma Signed-off-by: Greg Kroah-Hartman

net: stmmac: fix rx limit check in stmmac_rx_zc()

2026-01-19T12:09:36+00:00

[ Upstream commit 8048168df56e225c94e50b04cb7b0514135d7a1c ] The extra "count >= limit" check in stmmac_rx_zc() is redundant and has no effect because the value of "count" doesn't change after the while condition at this point. However, it can change after "read_again:" label: while (count < limit) { ... if (count >= limit) break; read_again: ... /* XSK pool expects RX frame 1:1 mapped to XSK buffer */ if (likely(status & rx_not_ls)) { xsk_buff_free(buf->xdp); buf->xdp = NULL; dirty++; count++; goto read_again; } ... This patch addresses the same issue previously resolved in stmmac_rx() by commit fa02de9e7588 ("net: stmmac: fix rx budget limit check"). The fix is the same: move the check after the label to ensure that it bounds the goto loop. Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Signed-off-by: Alexey Kodanev Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/20251126104327.175590-1-aleksei.kodanev@bell-sw.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: Check stmmac_hw_setup() in stmmac_resume()

2025-12-06T21:09:18+00:00

[ Upstream commit 6896c2449a1858acb643014894d01b3a1223d4e5 ] stmmac_hw_setup() may return 0 on success and an appropriate negative integer as defined in errno.h file on failure, just check it and then return early if failed in stmmac_resume(). Signed-off-by: Tiezhu Yang Reviewed-by: Maxime Chevallier Reviewed-by: Huacai Chen Link: https://patch.msgid.link/20250811073506.27513-2-yangtiezhu@loongson.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

minmax: add a few more MIN_T/MAX_T users

2025-10-19T14:21:52+00:00

[ Upstream commit 4477b39c32fdc03363affef4b11d48391e6dc9ff ] Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant expressions in VM code") added the simpler MIN_T/MAX_T macros in order to avoid some excessive expansion from the rather complicated regular min/max macros. The complexity of those macros stems from two issues: (a) trying to use them in situations that require a C constant expression (in static initializers and for array sizes) (b) the type sanity checking and MIN_T/MAX_T avoids both of these issues. Now, in the whole (long) discussion about all this, it was pointed out that the whole type sanity checking is entirely unnecessary for min_t/max_t which get a fixed type that the comparison is done in. But that still leaves min_t/max_t unnecessarily complicated due to worries about the C constant expression case. However, it turns out that there really aren't very many cases that use min_t/max_t for this, and we can just force-convert those. This does exactly that. Which in turn will then allow for much simpler implementations of min_t()/max_t(). All the usual "macros in all upper case will evaluate the arguments multiple times" rules apply. We should do all the same things for the regular min/max() vs MIN/MAX() cases, but that has the added complexity of various drivers defining their own local versions of MIN/MAX, so that needs another level of fixes first. Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/ Cc: David Laight Cc: Lorenzo Stoakes Signed-off-by: Linus Torvalds Signed-off-by: Eliav Farber Signed-off-by: Greg Kroah-Hartman

net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts

2025-09-04T12:28:46+00:00

[ Upstream commit 4f23382841e67174211271a454811dd17c0ef3c5 ] Enabling RX FIFO Overflow interrupts is counterproductive and causes an interrupt storm when RX FIFO overflows. Disabling this interrupt has no side effect and eliminates interrupt storms when the RX FIFO overflows. Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO overflow interrupts") disables RX FIFO overflow interrupts for DWMAC4 IP and removes the corresponding handling of this interrupt. This patch is doing the same thing for XGMAC IP. Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Rohan G Thomas Reviewed-by: Matthew Gerlach Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: platform: guarantee uniqueness of bus_id

2025-06-27T10:05:17+00:00

[ Upstream commit eb7fd7aa35bfcc1e1fda4ecc42ccfcb526cdc780 ] bus_id is currently derived from the ethernetX alias. If one is missing for the device, 0 is used. If ethernet0 points to another stmmac device or if there are 2+ stmmac devices without an ethernet alias, then bus_id will be 0 for all of those. This is an issue because the bus_id is used to generate the mdio bus id (new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c stmmac_mdio_register) and this needs to be unique. This allows to avoid needing to define ethernet aliases for devices with multiple stmmac controllers (such as the Rockchip RK3588) for multiple stmmac devices to probe properly. Obviously, the bus_id isn't guaranteed to be stable across reboots if no alias is set for the device but that is easily fixed by simply adding an alias if this is desired. Fixes: 25c83b5c2e82 ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710") Signed-off-by: Quentin Schulz Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20250527-stmmac-mdio-bus_id-v2-1-a5ca78454e3c@cherry.de Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dwmac-sun8i: Use parsed internal PHY address instead of 1

2025-06-04T12:38:05+00:00

[ Upstream commit 47653e4243f2b0a26372e481ca098936b51ec3a8 ] While the MDIO address of the internal PHY on Allwinner sun8i chips is generally 1, of_mdio_parse_addr is used to cleanly parse the address from the device-tree instead of hardcoding it. A commit reworking the code ditched the parsed value and hardcoded the value 1 instead, which didn't really break anything but is more fragile and not future-proof. Restore the initial behavior using the parsed address returned from the helper. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Paul Kocialkowski Reviewed-by: Andrew Lunn Acked-by: Corentin LABBE Tested-by: Corentin LABBE Link: https://patch.msgid.link/20250519164936.4172658-1-paulk@sys-base.io Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin