kernel/linux.git/drivers/net/ethernet/microchip, branch v6.1.87

net: sparx5: fix wrong config being used when reconfiguring PCS

2024-04-17T09:18:25+00:00

[ Upstream commit 33623113a48ea906f1955cbf71094f6aa4462e8f ] The wrong port config is being used if the PCS is reconfigured. Fix this by correctly using the new config instead of the old one. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon Reviewed-by: Jacob Keller Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips

2024-04-10T14:28:23+00:00

[ Upstream commit e4a58989f5c839316ac63675e8800b9eed7dbe96 ] PCI11x1x Rev B0 devices might drop packets when receiving back to back frames at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO threshold parameter from its hardware default of 4 to 3 dwords to prevent the problem. Rev C0 and later hardware already defaults to 3 dwords. Fixes: bb4f6bffe33c ("net: lan743x: Add PCI11010 / PCI11414 device IDs") Signed-off-by: Raju Lakkaraju Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240326065805.686128-1-Raju.Lakkaraju@microchip.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: sparx5: Fix use after free inside sparx5_del_mact_entry

2024-03-15T14:48:14+00:00

[ Upstream commit 89d72d4125e94aa3c2140fedd97ce07ba9e37674 ] Based on the static analyzis of the code it looks like when an entry from the MAC table was removed, the entry was still used after being freed. More precise the vid of the mac_entry was used after calling devm_kfree on the mac_entry. The fix consists in first using the vid of the mac_entry to delete the entry from the HW and after that to free it. Fixes: b37a1bae742f ("net: sparx5: add mactable support") Signed-off-by: Horatiu Vultur Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: sparx5: Add spinlock for frame transmission from CPU

2024-03-01T12:26:38+00:00

[ Upstream commit 603ead96582d85903baec2d55f021b8dac5c25d2 ] Both registers used when doing manual injection or fdma injection are shared between all the net devices of the switch. It was noticed that when having two process which each of them trying to inject frames on different ethernet ports, that the HW started to behave strange, by sending out more frames then expected. When doing fdma injection it is required to set the frame in the DCB and then make sure that the next pointer of the last DCB is invalid. But because there is no locks for this, then easily this pointer between the DCB can be broken and then it would create a loop of DCBs. And that means that the HW will continuously transmit these frames in a loop. Until the SW will break this loop. Therefore to fix this issue, add a spin lock for when accessing the registers for manual or fdma injection. Signed-off-by: Horatiu Vultur Reviewed-by: Daniel Machon Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

lan966x: Fix crash when adding interface under a lag

2024-02-23T08:12:30+00:00

[ Upstream commit 15faa1f67ab405d47789d4702f587ec7df7ef03e ] There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. Fixes: cabc9d49333d ("net: lan966x: Add lag support for lan966x") Signed-off-by: Horatiu Vultur Reviewed-by: Michal Swiatkowski Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: lan966x: Fix port configuration when using SGMII interface

2024-02-05T20:13:01+00:00

[ Upstream commit 62b4248105353e7d1debd30ca5c57ec5e5f28e35 ] In case the interface between the MAC and the PHY is SGMII, then the bit GIGA_MODE on the MAC side needs to be set regardless of the speed at which it is running. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur Reviewed-by: Maxime Chevallier Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: lan743x: Don't sleep in atomic context

2023-07-23T11:49:18+00:00

commit 7a8227b2e76be506b2ac64d2beac950ca04892a5 upstream. dev_set_rx_mode() grabs a spin_lock, and the lan743x implementation proceeds subsequently to go to sleep using readx_poll_timeout(). Introduce a helper wrapping the readx_poll_timeout_atomic() function and use it to replace the calls to readx_polL_timeout(). Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Cc: stable@vger.kernel.org Cc: Bryan Whitehead Cc: UNGLinuxDriver@microchip.com Signed-off-by: Moritz Fischer Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230627035000.1295254-1-moritzf@google.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

lan966x: Fix unloading/loading of the driver

2023-05-30T13:03:21+00:00

commit 600761245952d7f70280add6ce02894f1528992b upstream. It was noticing that after a while when unloading/loading the driver and sending traffic through the switch, it would stop working. It would stop forwarding any traffic and the only way to get out of this was to do a power cycle of the board. The root cause seems to be that the switch core is initialized twice. Apparently initializing twice the switch core disturbs the pointers in the queue systems in the HW, so after a while it would stop sending the traffic. Unfortunetly, it is not possible to use a reset of the switch here, because the reset line is connected to multiple devices like MDIO, SGPIO, FAN, etc. So then all the devices will get reseted when the network driver will be loaded. So the fix is to check if the core is initialized already and if that is the case don't initialize it again. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Horatiu Vultur Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: lan966x: Fix port police support using tc-matchall

2023-03-17T07:50:23+00:00

[ Upstream commit 81563d8548b0478075c720666be348d4199b8591 ] When the police was removed from the port, then it was trying to remove the police from the police id and not from the actual police index. The police id represents the id of the police and police index represents the position in HW where the police is situated. The port police id can be any number while the port police index is a number based on the port chip port. Fix this by deleting the police from HW that is situated at the police index and not police id. Fixes: 5390334b59a3 ("net: lan966x: Add port police support using tc-matchall") Signed-off-by: Horatiu Vultur Reviewed-by: Simon Horman Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: lan966x: Fix possible deadlock inside PTP

2023-03-10T08:33:08+00:00

[ Upstream commit 3a70e0d4c9d74cb00f7c0ec022f5599f9f7ba07d ] When doing timestamping in lan966x and having PROVE_LOCKING enabled the following warning is shown. ======================================================== WARNING: possible irq lock inversion dependency detected 6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G N -------------------------------------------------------- swapper/0/0 just changed the state of lock: c2609f50 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8 but this lock took another, SOFTIRQ-unsafe lock in the past: (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lan966x->ptp_ts_id_lock); local_irq_disable(); lock(_xmit_ETHER#2); lock(&lan966x->ptp_ts_id_lock); lock(_xmit_ETHER#2); *** DEADLOCK *** 5 locks held by swapper/0/0: #0: c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c #1: c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c #2: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64 #3: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224 #4: c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224 the shortest dependencies between 2nd lock and 1st lock: -> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire.part.0+0xb0/0x248 _raw_spin_lock+0x38/0x48 lan966x_ptp_irq_handler+0x164/0x2a8 irq_thread_fn+0x1c/0x78 irq_thread+0x130/0x278 kthread+0xec/0x110 ret_from_fork+0x14/0x28 SOFTIRQ-ON-W at: lock_acquire.part.0+0xb0/0x248 _raw_spin_lock+0x38/0x48 lan966x_ptp_irq_handler+0x164/0x2a8 irq_thread_fn+0x1c/0x78 irq_thread+0x130/0x278 kthread+0xec/0x110 ret_from_fork+0x14/0x28 INITIAL USE at: lock_acquire.part.0+0xb0/0x248 _raw_spin_lock_irqsave+0x4c/0x68 lan966x_ptp_txtstamp_request+0x128/0x1cc lan966x_port_xmit+0x224/0x43c dev_hard_start_xmit+0xa8/0x2f0 sch_direct_xmit+0x108/0x2e8 __dev_queue_xmit+0x41c/0x1224 packet_sendmsg+0xdb4/0x134c __sys_sendto+0xd0/0x154 sys_send+0x18/0x20 ret_fast_syscall+0x0/0x1c } ... key at: [] __key.2+0x0/0x8 ... acquired at: _raw_spin_lock_irqsave+0x4c/0x68 lan966x_ptp_txtstamp_request+0x128/0x1cc lan966x_port_xmit+0x224/0x43c dev_hard_start_xmit+0xa8/0x2f0 sch_direct_xmit+0x108/0x2e8 __dev_queue_xmit+0x41c/0x1224 packet_sendmsg+0xdb4/0x134c __sys_sendto+0xd0/0x154 sys_send+0x18/0x20 ret_fast_syscall+0x0/0x1c -> (_xmit_ETHER#2){+.-.}-{2:2} { HARDIRQ-ON-W at: lock_acquire.part.0+0xb0/0x248 _raw_spin_lock+0x38/0x48 netif_freeze_queues+0x38/0x68 dev_deactivate_many+0xac/0x388 dev_deactivate+0x38/0x6c linkwatch_do_dev+0x70/0x8c __linkwatch_run_queue+0xd4/0x1e8 linkwatch_event+0x24/0x34 process_one_work+0x284/0x744 worker_thread+0x28/0x4bc kthread+0xec/0x110 ret_from_fork+0x14/0x28 IN-SOFTIRQ-W at: lock_acquire.part.0+0xb0/0x248 _raw_spin_lock+0x38/0x48 sch_direct_xmit+0x16c/0x2e8 __dev_queue_xmit+0x41c/0x1224 ip6_finish_output2+0x5f4/0xc64 ndisc_send_skb+0x4cc/0x81c addrconf_rs_timer+0xb0/0x2f8 call_timer_fn+0xb4/0x33c expire_timers+0xb4/0x10c run_timer_softirq+0xf8/0x2a8 __do_softirq+0xd4/0x5fc __irq_exit_rcu+0x138/0x17c irq_exit+0x8/0x28 __irq_svc+0x90/0xbc arch_cpu_idle+0x30/0x3c default_idle_call+0x44/0xac do_idle+0xc8/0x138 cpu_startup_entry+0x18/0x1c rest_init+0xcc/0x168 arch_post_acpi_subsys_init+0x0/0x8 INITIAL USE at: lock_acquire.part.0+0xb0/0x248 _raw_spin_lock+0x38/0x48 netif_freeze_queues+0x38/0x68 dev_deactivate_many+0xac/0x388 dev_deactivate+0x38/0x6c linkwatch_do_dev+0x70/0x8c __linkwatch_run_queue+0xd4/0x1e8 linkwatch_event+0x24/0x34 process_one_work+0x284/0x744 worker_thread+0x28/0x4bc kthread+0xec/0x110 ret_from_fork+0x14/0x28 } ... key at: [] netdev_xmit_lock_key+0x8/0x1c8 ... acquired at: __lock_acquire+0x978/0x2978 lock_acquire.part.0+0xb0/0x248 _raw_spin_lock+0x38/0x48 sch_direct_xmit+0x16c/0x2e8 __dev_queue_xmit+0x41c/0x1224 ip6_finish_output2+0x5f4/0xc64 ndisc_send_skb+0x4cc/0x81c addrconf_rs_timer+0xb0/0x2f8 call_timer_fn+0xb4/0x33c expire_timers+0xb4/0x10c run_timer_softirq+0xf8/0x2a8 __do_softirq+0xd4/0x5fc __irq_exit_rcu+0x138/0x17c irq_exit+0x8/0x28 __irq_svc+0x90/0xbc arch_cpu_idle+0x30/0x3c default_idle_call+0x44/0xac do_idle+0xc8/0x138 cpu_startup_entry+0x18/0x1c rest_init+0xcc/0x168 arch_post_acpi_subsys_init+0x0/0x8 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from mark_lock.part.0+0x59c/0x93c mark_lock.part.0 from __lock_acquire+0x978/0x2978 __lock_acquire from lock_acquire.part.0+0xb0/0x248 lock_acquire.part.0 from _raw_spin_lock+0x38/0x48 _raw_spin_lock from sch_direct_xmit+0x16c/0x2e8 sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224 __dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64 ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8 addrconf_rs_timer from call_timer_fn+0xb4/0x33c call_timer_fn from expire_timers+0xb4/0x10c expire_timers from run_timer_softirq+0xf8/0x2a8 run_timer_softirq from __do_softirq+0xd4/0x5fc __do_softirq from __irq_exit_rcu+0x138/0x17c __irq_exit_rcu from irq_exit+0x8/0x28 irq_exit from __irq_svc+0x90/0xbc Exception stack(0xc1001f20 to 0xc1001f68) 1f20: ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370 1f40: c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0 1f60: 600f0013 ffffffff __irq_svc from arch_cpu_idle+0x30/0x3c arch_cpu_idle from default_idle_call+0x44/0xac default_idle_call from do_idle+0xc8/0x138 do_idle from cpu_startup_entry+0x18/0x1c cpu_startup_entry from rest_init+0xcc/0x168 rest_init from arch_post_acpi_subsys_init+0x0/0x8 Fix this by using spin_lock_irqsave/spin_lock_irqrestore also inside lan966x_ptp_irq_handler. Fixes: e85a96e48e33 ("net: lan966x: Add support for ptp interrupts") Signed-off-by: Horatiu Vultur Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin