kernel/linux.git/drivers/net/ethernet/intel, branch v7.1-rc5

igc: fix potential skb leak in igc_fpe_xmit_smd_frame()

2026-05-19T02:00:44+00:00

When igc_fpe_init_tx_descriptor() fails, no one takes care of an allocated skb, leaking it. [1] Use dev_kfree_skb_any() on failure. Tested on an I226 adapter with the following command, while injecting faults in igc_fpe_init_tx_descriptor() to trigger the error path. # ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on [1] unreferenced object 0xffff888113c6cdc0 (size 224): ... backtrace (crc be3d3fda): kmem_cache_alloc_node_noprof+0x3b1/0x410 __alloc_skb+0xde/0x830 igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0 igc_fpe_send_mpacket+0x37/0x90 ethtool_mmsv_verify_timer+0x15e/0x300 Cc: stable@vger.kernel.org Fixes: 5422570c0010 ("igc: add support for frame preemption verification") Signed-off-by: Kohei Enju Reviewed-by: Simon Horman Reviewed-by: Faizal Rahim Tested-by: Avigail Dahan Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-10-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

igc: set tx buffer type for SMD frames

2026-05-19T02:00:44+00:00

Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. Fixes: 5422570c0010 ("igc: add support for frame preemption verification") Signed-off-by: Kohei Enju Reviewed-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Avigail Dahan Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ixgbevf: fix use-after-free in VEPA multicast source pruning

2026-05-19T02:00:44+00:00

ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: restore PTP Rx timestamp config after ethtool set-channels

2026-05-19T02:00:44+00:00

When ethtool -L changes queue counts, ice_vsi_recfg_qs() closes and rebuilds the VSI, reallocating Rx rings. The newly allocated rings have ptp_rx cleared, so RX hardware timestamps are no longer attached to skb until hwtstamp configuration is applied again. Restore timestamp mode after ice_vsi_open() in the queue reconfiguration path, matching reset/rebuild behavior and ensuring newly rebuilt Rx rings have PTP RX timestamping re-enabled. Testing hints: - run ptp4l application in client synchronization mode: ptp4l -i ethX -m -s - run PTP traffic - change queue number on ethX netdev interface: ethtool -L ethX combined new_queue_size - observe ptp4l output - expected result: no "received DELAY_REQ without timestamp" messages Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Cc: stable@vger.kernel.org Reviewed-by: Aleksandr Loktionov Signed-off-by: Grzegorz Nitka Reviewed-by: Simon Horman Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: ptp: use primary NAC semaphore on E825

2026-05-19T02:00:44+00:00

For E825 2xNAC configurations, PTP semaphore operations must hit the primary NAC register block so both sides coordinate on the same lock. Commit e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices") updated other primary-only PTP register accesses to use the primary NAC on non-primary functions, but left ice_ptp_lock() and ice_ptp_unlock() operating on the local NAC. As a result, secondary NAC PTP paths can take a different semaphore than the primary side. Select the primary hardware in ice_ptp_lock() and ice_ptp_unlock() when the current function is not primary, keeping semaphore operations symmetric and consistent with the rest of the 2xNAC PTP register access path. Fixes: e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices") Reviewed-by: Arkadiusz Kubalewski Signed-off-by: Grzegorz Nitka Reviewed-by: Aleksandr Loktionov Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: ptp: serialize E825 PHY timer start with PTP lock

2026-05-19T02:00:43+00:00

ice_start_phy_timer_eth56g() programs TIMETUS registers and issues INIT_INCVAL without holding the global PTP semaphore. This allows concurrent PTP command paths to interleave with PHY timer start, which can make the sequence fail and leave timer initialization inconsistent. Take the PTP lock around TIMETUS registers programming and INIT_INCVAL command execution, and make sure the lock is released on all error paths. Keep the subsequent sync step outside of this critical section, since ice_sync_phy_timer_eth56g() takes the same semaphore internally. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski Signed-off-by: Grzegorz Nitka Reviewed-by: Aleksandr Loktionov Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: fix setting promisc mode while adding VID filter

2026-05-19T02:00:43+00:00

There are at least two paths through which VSI promiscuous mode can be independently configured via ice_fltr_set_vsi_promisc(): - ice_vlan_rx_add_vid() (netdev op) - ice_service_task() -> ... -> ice_set_promisc() Both paths may try to program promiscuous mode concurrently. One such scenario is: 1. Add ice netdev to bond 2. Add the bond netdev to bridge 3. ice netdev enters allmulticast mode (IFF_ALLMULTI) 4. Service task programs promisc mode filter 5. Bridge -> bond calls ice_vlan_rx_add_vid() Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc() returns any error, including -EEXIST. This causes VLAN filtering setup to fail on the bond interface. ice_set_promisc() already handles -EEXIST correctly. Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the promisc filter is already programmed, continue without returning error. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Cc: stable@vger.kernel.org Signed-off-by: Marcin Szycik Signed-off-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: fix VF queue configuration with low MTU values

2026-05-19T02:00:43+00:00

The ice driver's VF queue configuration validation rejects databuffer_size values below 1024 bytes, which prevents VFs from using MTU values below 871 bytes. The iavf driver calculates databuffer_size based on the MTU using: databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128) where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN). For MTU values below 871: MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected) MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted) The 1024-byte minimum seems unnecessarily restrictive, because the hardware supports databuffer_size as low as 128 bytes (the alignment boundary), which should allow MTU values down to the standard minimum of 68 bytes. I haven't found the reason why the limit was configured in the commit 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so with no more information and since it is working, change the minimum databuffer_size validation from 1024 to 128 bytes to allow standard low MTU values while still preventing invalid configurations. Fixes: 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message") cc: stable@vger.kernel.org Signed-off-by: Jose Ignacio Tornos Martinez Reviewed-by: Jacob Keller Reviewed-by: Michal Swiatkowski Reviewed-by: Paul Menzel Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: fix locking around wait_event_interruptible_locked_irq

2026-05-19T02:00:43+00:00

Commit 50327223a8bb ("ice: add lock to protect low latency interface") introduced a wait queue used to protect the low latency timer interface. The queue is used with the wait_event_interruptible_locked_irq macro, which unlocks the wait queue lock while sleeping. The irq variant uses spin_lock_irq and spin_unlock_irq to manage this. The wait queue lock was previously locked using spin_lock_irqsave. This difference in lock variants could lead to issues, since wait_event would unlock the wait queue and restore interrupts while sleeping. The ice_read_phy_tstamp_ll_e810() function is ultimately called through ice_read_phy_tstamp, which is called from ice_ptp_process_tx_tstamp or ice_ptp_clear_unexpected_tx_ready. The former is called through the miscellaneous IRQ thread function, while the latter is called from the service task work queue thread. Neither of these functions has interrupts disabled, so use spin_lock_irq instead of spin_lock_irqsave. Fixes: 50327223a8bb ("ice: add lock to protect low latency interface") Cc: stable@vger.kernel.org Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20250109181823.77f44c69@kernel.org/ Signed-off-by: Jacob Keller Signed-off-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: dpll: fix misplaced header macros

2026-05-08T23:01:09+00:00

The CGU register definitions (ICE_CGU_R10, ICE_CGU_R11 and related field masks) were placed after the #endif of the _ICE_DPLL_H_ include guard, leaving them unprotected. Move them inside the guard. Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery") Signed-off-by: Ivan Vecera Reviewed-by: Aleksandr Loktionov Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-8-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski