kernel/linux.git/drivers/net/ethernet/intel, branch v4.19.39

fm10k: Fix a potential NULL pointer dereference

2019-05-02T07:58:57+00:00

commit 01ca667133d019edc9f0a1f70a272447c84ec41f upstream. Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573 Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00 RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319 __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff If alloc_workqueue fails, it should return -ENOMEM, otherwise may trigger this NULL pointer dereference while unloading drivers. Reported-by: Hulk Robot Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue") Signed-off-by: Yue Haibing Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

e1000e: Exclude device from suspend direct complete optimization

2019-04-05T20:33:11+00:00

[ Upstream commit 59f58708c5047289589cbf6ee95146b76cf57d1e ] e1000e sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves e1000e in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let e1000e always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

e1000e: fix cyclic resets at link up with active tx

2019-04-05T20:33:11+00:00

[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ] I'm seeing series of e1000e resets (sometimes endless) at system boot if something generates tx traffic at this time. In my case this is netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames" from e1000e itself. As result e1000_watchdog_task sees used tx buffer while carrier is off and start this reset cycle again. [ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 30.898564] netpoll: netconsole: local port 6666 [ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 [ 30.898567] netpoll: netconsole: interface 'eth1' [ 30.898568] netpoll: netconsole: remote port 6666 [ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 [ 30.917747] console [netcon0] enabled [ 30.917749] netconsole: network logging started [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None This patch flushes tx buffers only once when carrier is off rather than at each watchdog iteration. Signed-off-by: Konstantin Khlebnikov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

e1000e: Fix -Wformat-truncation warnings

2019-04-05T20:33:02+00:00

[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ] Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWEN

2019-03-23T19:09:51+00:00

[ Upstream commit 156a67a9065e3339be85f811d1b13b920e50d73b ] The enabling L3/L4 filtering for transmit switched packets for all devices caused unforeseen issue on older devices when trying to send UDP traffic in an ordered sequence. This bit was originally intended for X550 devices, which supported this feature, so limit the scope of this bit to only X550 devices. Signed-off-by: Jeff Kirsher Tested-by: Andrew Bowers Signed-off-by: Sasha Levin

i40e: report correct statistics when XDP is enabled

2019-03-19T12:12:42+00:00

commit cdec2141c24ef177d929765c5a6f95549c266fb3 upstream. When XDP is enabled, the driver will report incorrect statistics. Received frames will reported as transmitted frames. This commits fixes the i40e implementation of ndo_get_stats64 (struct net_device_ops), so that iproute2 will report correct statistics (e.g. when running "ip -stats link show dev eth0") even when XDP is enabled. Reported-by: Jesper Dangaard Brouer Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Signed-off-by: Björn Töpel Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Cc: Emeric Brun Signed-off-by: Greg Kroah-Hartman

igb: Fix an issue that PME is not enabled during runtime suspend

2019-02-12T18:47:15+00:00

[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ] I210 ethernet card doesn't wakeup when a cable gets plugged. It's because its PME is not set. Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops calling pci_finish_runtime_suspend(), which enables the PCI PME. To fix the issue, let's not to save PCI states when it's runtime suspend, to let the PCI subsystem enables PME. Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3") Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ice: Do not enable NAPI on q_vectors that have no rings

2019-02-12T18:47:15+00:00

[ Upstream commit eec903769b4ea476591ffff73bb7359f14f38c51 ] If ice driver has q_vectors w/ active NAPI that has no rings, then this will result in a divide by zero error. To correct it I am updating the driver code so that we only support NAPI on q_vectors that have 1 or more rings allocated to them. See commit 13a8cd191a2b ("i40e: Do not enable NAPI on q_vectors that have no rings") for detail. Signed-off-by: Young Xiao Acked-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

i40e: define proper net_device::neigh_priv_len

2019-02-12T18:47:15+00:00

[ Upstream commit 31389b53b3e0b535867af9090a5d19ec64768d55 ] Out of bound read reported by KASan. i40iw_net_event() reads unconditionally 16 bytes from neigh->primary_key while the memory allocated for "neighbour" struct is evaluated in neigh_alloc() as tbl->entry_size + dev->neigh_priv_len where "dev" is a net_device. But the driver does not setup dev->neigh_priv_len and we read beyond the neigh entry allocated memory, so the patch in the next mail fixes this. Signed-off-by: Konstantin Khorenko Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

i40e: prevent overlapping tx_timeout recover

2019-02-12T18:47:00+00:00

[ Upstream commit d5585b7b6846a6d0f9517afe57be3843150719da ] If a TX hang occurs, we attempt to recover by incrementally resetting. If we're starved for CPU time, it's possible the reset doesn't actually complete (or even fire) before another tx_timeout fires causing us to fly through the different resets without actually doing them. This adds a bit to set and check if a timeout recovery is already pending and, if so, bail out of tx_timeout. The bit will get cleared at the end of i40e_rebuild when reset is complete. Signed-off-by: Alan Brady Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin