kernel/linux.git/drivers/net/ethernet/intel/i40e, branch linux-7.0.y

i40e: Cleanup PTP pins on probe failure

2026-05-23T11:09:36+00:00

commit 678b713ece1e853f11e670a84cb887c35e1381b7 upstream. PTP pin structs are allocated early in probe, but never cleaned up. Fix this by calling i40e_ptp_free_pins in the error path. To support this, i40e_ptp_free_pins is added to the header and pin_config is correctly nullified after being freed. This has been an issue since i40e_ptp_alloc_pins was introduced. Fixes: 1050713026a08 ("i40e: add support for PTP external synchronization clock") Reported-by: Kohei Enju Cc: stable@vger.kernel.org Signed-off-by: Matt Vollrath Reviewed-by: Paul Menzel Reviewed-by: Aleksandr Loktionov Reviewed-by: Kohei Enju Tested-by: Sunitha Mekala Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-2-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

i40e: don't advertise IFF_SUPP_NOFCS

2026-05-23T11:09:20+00:00

[ Upstream commit a24162f18825684ad04e3a5d0531f8a50d679347 ] i40e advertises IFF_SUPP_NOFCS, allowing users to use the SO_NOFCS socket option. However, this option is silently ignored, as the driver does not check skb->no_fcs, and always enables FCS insertion offload. Fix this by removing the advertisement of IFF_SUPP_NOFCS. This behavior can be reproduced with a simple AF_PACKET socket: import socket s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW) s.setsockopt(socket.SOL_SOCKET, 43, 1) # SO_NOFCS s.bind(("eth0", 0)) s.send(b'\xff' * 64) Previously, send() succeeds but the driver ignores SO_NOFCS. With this change, send() fails with -EPROTONOSUPPORT, as expected. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Kohei Enju Reviewed-by: Aleksandr Loktionov Tested-by: Sunitha Mekala Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-9-686c33c9828d@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

i40e: fix src IP mask checks and memcpy argument names in cloud filter

2026-03-10T20:02:45+00:00

Fix following issues in the IPv4 and IPv6 cloud filter handling logic in both the add and delete paths: - The source-IP mask check incorrectly compares mask.src_ip[0] against tcf.dst_ip[0]. Update it to compare against tcf.src_ip[0]. This likely goes unnoticed because the check is in an "else if" path that only executes when dst_ip is not set, most cloud filter use cases focus on destination-IP matching, and the buggy condition can accidentally evaluate true in some cases. - memcpy() for the IPv4 source address incorrectly uses ARRAY_SIZE(tcf.dst_ip) instead of ARRAY_SIZE(tcf.src_ip), although both arrays are the same size. - The IPv4 memcpy operations used ARRAY_SIZE(tcf.dst_ip) and ARRAY_SIZE (tcf.src_ip), Update these to use sizeof(cfilter->ip.v4.dst_ip) and sizeof(cfilter->ip.v4.src_ip) to ensure correct and explicit copy size. - In the IPv6 delete path, memcmp() uses sizeof(src_ip6) when comparing dst_ip6 fields. Replace this with sizeof(dst_ip6) to make the intent explicit, even though both fields are struct in6_addr. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Signed-off-by: Alok Tiwari Reviewed-by: Aleksandr Loktionov Reviewed-by: Paul Menzel Signed-off-by: Tony Nguyen

i40e: use xdp.frame_sz as XDP RxQ info frag_size

2026-03-05T16:02:04+00:00

The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead of DMA write size. Different assumptions in i40e driver configuration lead to negative tailroom. Set frag_size to the same value as frame_sz in shared pages mode, use new helper to set frag_size when AF_XDP ZC is active. Fixes: a045d2f2d03d ("i40e: set xdp_rxq_info::frag_size") Reviewed-by: Aleksandr Loktionov Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski

i40e: fix registering XDP RxQ info

2026-03-05T16:02:04+00:00

Current way of handling XDP RxQ info in i40e has a problem, where frag_size is not updated when xsk_buff_pool is detached or when MTU is changed, this leads to growing tail always failing for multi-buffer packets. Couple XDP RxQ info registering with buffer allocations and unregistering with cleaning the ring. Fixes: a045d2f2d03d ("i40e: set xdp_rxq_info::frag_size") Reviewed-by: Aleksandr Loktionov Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski

Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2026-02-28T16:43:56+00:00

Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-02-19 (idpf, ice, i40e, ixgbevf, e1000e) For idpf: Li Li moves the check for software marker to occur after incrementing next to clean to avoid re-encountering the same packet. He also adds a couple of checks to prevent NULL pointer dereferences and NULLs rss_key, after free, in error path so that later checks are properly evaluated. Brian Vazquez adjusts IRQ naming to have correlation with netdev naming. Sreedevi removes validation of action type as part of ntuple rule deletion. For ice: Aaron Ma breaks RDMA initialization into two steps and adjusts calls so that VSIs are entirely configured before plugging. Michal Schmidt fixes initialization of loopback VSI to have proper resources allocated to allow for loopback testing to occur. For i40e: Thomas Gleixner fixes a leak of preempt count by replacing get_cpu() with smp_processor_id(). For ixgbevf: Jedrzej adds a check for mailbox version before attempting to call an associated link state call that is supported in that mailbox version. For e1000e: Vitaly clears power gating feature for Panther Lake systems to avoid packet issues. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: clear DPG_EN after reset to avoid autonomous power-gating e1000e: introduce new board type for Panther Lake PCH ixgbevf: fix link setup issue i40e: Fix preempt count leak in napi poll tracepoint ice: fix crash in ethtool offline loopback test ice: recap the VSI and QoS info after rebuild idpf: Fix flow rule delete failure due to invalid validation idpf: change IRQ naming to match netdev and ethtool queue numbering idpf: nullify pointers after they are freed idpf: skip deallocating txq group's txqs if it is NULL idpf: skip deallocating bufq_sets from rx_qgrp if it is NULL idpf: increment completion queue next_to_clean in sw marker wait routine ==================== Link: https://patch.msgid.link/20260225211546.1949260-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

i40e: Fix preempt count leak in napi poll tracepoint

2026-02-25T19:43:57+00:00

Using get_cpu() in the tracepoint assignment causes an obvious preempt count leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101? This clearly has seen a lot of testing in the last 3+ years... Use smp_processor_id() instead. Fixes: 6d4d584a7ea8 ("i40e: Add i40e_napi_poll tracepoint") Signed-off-by: Thomas Gleixner Cc: Tony Nguyen Cc: Przemek Kitszel Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Reviewed-by: Joe Damato Reviewed-by: Aleksandr Loktionov Signed-off-by: Tony Nguyen

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33+00:00

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\