kernel/linux.git/drivers/net/ethernet/faraday, branch v5.10.264

net: ftgmac100: fix ring allocation unwind on open failure

2026-04-18T08:31:13+00:00

commit c0fd0fe745f5e8c568d898cd1513d0083e46204a upstream. ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style. Fixes: d72e01a0430f ("ftgmac100: Use a scratch buffer for failed RX allocations") Cc: stable@vger.kernel.org Signed-off-by: Yufan Chen Link: https://patch.msgid.link/20260328163257.60836-1-yufan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ftgmac100: Ensure tx descriptor updates are visible

2024-10-17T13:07:35+00:00

[ Upstream commit 4186c8d9e6af57bab0687b299df10ebd47534a0a ] The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by: Jacky Chou Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ftgmac100: Enable TX interrupt to avoid TX timeout

2024-10-17T13:07:33+00:00

[ Upstream commit fef2843bb49f414d1523ca007d088071dee0e055 ] Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: ftgmac100: Hold reference returned by of_get_child_by_name()

2022-07-21T19:20:10+00:00

[ Upstream commit 49b9f431ff0d845a36be0b3ede35ec324f2e5fee ] In ftgmac100_probe(), we should hold the refernece returned by of_get_child_by_name() and use it to call of_node_put() for reference balance. Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Liang He Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ftgmac100: Disable hardware checksum on AST2600

2022-06-06T06:42:40+00:00

[ Upstream commit 6fd45e79e8b93b8d22fb8fe22c32fbad7e9190bd ] The AST2600 when using the i210 NIC over NC-SI has been observed to produce incorrect checksum results with specific MTU values. This was first observed when sending data across a long distance set of networks. On a local network, the following test was performed using a 1MB file of random data. On the receiver run this script: #!/bin/bash while [ 1 ]; do # Zero the stats nstat -r > /dev/null nc -l 9899 > test-file # Check for checksum errors TcpInCsumErrors=$(nstat | grep TcpInCsumErrors) if [ -z "$TcpInCsumErrors" ]; then echo No TcpInCsumErrors else echo TcpInCsumErrors = $TcpInCsumErrors fi done On an AST2600 system: # nc 9899 < test-file The test was repeated with various MTU values: # ip link set mtu 1410 dev eth0 The observed results: 1500 - good 1434 - bad 1400 - good 1410 - bad 1420 - good The test was repeated after disabling tx checksumming: # ethtool -K eth0 tx-checksumming off And all MTU values tested resulted in transfers without error. An issue with the driver cannot be ruled out, however there has been no bug discovered so far. David has done the work to take the original bug report of slow data transfer between long distance connections and triaged it down to this test case. The vendor suspects this this is a hardware issue when using NC-SI. The fixes line refers to the patch that introduced AST2600 support. Reported-by: David Wilder Reviewed-by: Dylan Hung Signed-off-by: Joel Stanley Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ftgmac100: add missing error return code in ftgmac100_probe()

2021-07-14T14:56:16+00:00

[ Upstream commit 52af13a41489d7bbc1932d17583eff6e5fffc820 ] The variables will be free on path err_phy_connect, it should return error code, or it will cause double free when calling ftgmac100_remove(). Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ftgmac100: Restart MAC HW once

2021-03-30T12:31:58+00:00

[ Upstream commit 6897087323a2fde46df32917462750c069668b2f ] The interrupt handler may set the flag to reset the mac in the future, but that flag is not cleared once the reset has occurred. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Dylan Hung Acked-by: Benjamin Herrenschmidt Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ethernet: select CONFIG_CRC32 as needed

2020-12-04T22:42:21+00:00

A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann Acked-by: Nicolas Ferre Acked-by: Madalin Bucur Acked-by: Mark Einon Acked-by: Simon Horman Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

net: ftgmac100: Fix crash when removing driver

2020-11-17T18:59:03+00:00

When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific)) in net/core/dev.c due to still having the NC-SI packet handler registered. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind ------------[ cut here ]------------ kernel BUG at net/core/dev.c:10254! Internal error: Oops - BUG: 0 [#1] SMP ARM CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46 Hardware name: Generic DT based system PC is at netdev_run_todo+0x314/0x394 LR is at cpumask_next+0x20/0x24 pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153 sp : 855bbd58 ip : 00000001 fp : 855bbdac r10: 80c03d00 r9 : 80c06228 r8 : 81158c54 r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280 r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85514008 DAC: 00000051 Process sh (pid: 115, stack limit = 0x7cb5703d) ... Backtrace: [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c) r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410 r4:813b9000 [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30) [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8) r5:8115b410 r4:813b9000 [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c) Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Signed-off-by: Joel Stanley Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.au Signed-off-by: Jakub Kicinski

net: ftgmac100: Fix Aspeed ast2600 TX hang issue

2020-10-16T22:36:34+00:00

The new HW arbitration feature on Aspeed ast2600 will cause MAC TX to hang when handling scatter-gather DMA. Disable the problematic feature by setting MAC register 0x58 bit28 and bit27. Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Dylan Hung Reviewed-by: Joel Stanley Signed-off-by: Jakub Kicinski