kernel/linux.git/drivers/net/ethernet/broadcom, branch v6.6.132

net: bcmgenet: increase WoL poll timeout

2026-03-25T10:06:07+00:00

[ Upstream commit 6cfc3bc02b977f2fba5f7268e6504d1931a774f7 ] Some systems require more than 5ms to get into WoL mode. Increase the timeout value to 50ms. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Justin Chen Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20260312191852.3904571-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

eth: bnxt: always recalculate features after XDP clearing, fix null-deref

2026-03-25T10:05:59+00:00

[ Upstream commit f0aa6a37a3dbb40b272df5fc6db93c114688adcd ] Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.") Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") Reviewed-by: Michael Chan Reviewed-by: Somnath Kotur Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org Signed-off-by: Jakub Kicinski [ The context change is due to the commit 1f6e77cb9b32 ("bnxt_en: Add bnxt_l2_filter hash table.") in v6.8 and the commit 8336a974f37d ("bnxt_en: Save user configured filters in a lookup list") in v6.9 which are irrelevant to the logic of this patch. ] Signed-off-by: Rahul Sharma Signed-off-by: Greg Kroah-Hartman

net: bcmasp: fix early exit leak with fixed phy

2026-02-06T15:48:22+00:00

[ Upstream commit 6de4436bf369e1444606445e4cd5df5bcfc74b48 ] We are not deregistering the fixed phy link when hitting the early exit condition. Add the correct early exit sequence. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Justin Chen Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20260122194001.1098859-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix potential data corruption with HW GRO/LRO

2026-01-17T15:29:58+00:00

[ Upstream commit ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 ] Fix the max number of bits passed to find_first_zero_bit() in bnxt_alloc_agg_idx(). We were incorrectly passing the number of long words. find_first_zero_bit() may fail to find a zero bit and cause a wrong ID to be used. If the wrong ID is already in use, this can cause data corruption. Sometimes an error like this can also be seen: bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1 Fix it by passing the correct number of bits MAX_TPA_P5. Use DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity check to warn if a bit cannot be found and reset the ring [MChan]. Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.") Reviewed-by: Ray Jui Signed-off-by: Srijit Bose Signed-off-by: Michael Chan Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

broadcom: b44: prevent uninitialized value usage

2026-01-11T14:21:45+00:00

[ Upstream commit 50b3db3e11864cb4e18ff099cfb38e11e7f87a68 ] On execution path with raised B44_FLAG_EXTERNAL_PHY, b44_readphy() leaves bmcr value uninitialized and it is used later in the code. Add check of this flag at the beginning of the b44_nway_reset() and exit early of the function with restarting autonegotiation if an external PHY is used. Fixes: 753f492093da ("[B44]: port to native ssb support") Reviewed-by: Jonas Gorski Reviewed-by: Andrew Lunn Signed-off-by: Alexey Simakov Reviewed-by: Michael Chan Link: https://patch.msgid.link/20251205155815.4348-1-bigalex934@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix a possible memory leak in bnxt_ptp_init

2025-11-24T09:29:53+00:00

[ Upstream commit deb8eb39164382f1f67ef8e8af9176baf5e10f2d ] In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is not freeing the memory allocated for ptp_info->pin_config. Fix it to unconditionally free ptp_info->pin_config in bnxt_ptp_free(). Fixes: caf3eedbcd8d ("bnxt_en: 1PPS support for 5750X family chips") Reviewed-by: Pavan Chebbi Reviewed-by: Somnath Kotur Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tg3: prevent use of uninitialized remote_adv and local_adv variables

2025-10-23T14:16:31+00:00

[ Upstream commit 0c3f2e62815a43628e748b1e4ad97a1c46cce703 ] Some execution paths that jump to the fiber_setup_done label could leave the remote_adv and local_adv variables uninitialized and then use it. Initialize this variables at the point of definition to avoid this. Fixes: 85730a631f0c ("tg3: Add SGMII phy support for 5719/5718 serdes") Co-developed-by: Alexandr Sapozhnikov Signed-off-by: Alexandr Sapozhnikov Signed-off-by: Alexey Simakov Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/20251014164736.5890-1-bigalex934@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: correct offset handling for IPv6 destination address

2025-10-02T11:42:51+00:00

[ Upstream commit 3d3aa9472c6dd0704e9961ed4769caac5b1c8d52 ] In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6 destination values to the source address field (saddr) when processing pedit offsets within the destination address range. This patch corrects the assignment to use daddr instead of saddr, ensuring that pedit operations on IPv6 destination addresses are applied correctly. Fixes: 9b9eb518e338 ("bnxt_en: Add support for NAT(L3/L4 rewrite)") Signed-off-by: Alok Tiwari Reviewed-by: Somnath Kotur Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

cnic: Fix use-after-free bugs in cnic_delete_task

2025-09-25T09:00:07+00:00

[ Upstream commit cfa7d9b1e3a8604afc84e9e51d789c29574fb216 ] The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug. Fixes: fdf24086f475 ("cnic: Defer iscsi connection cleanup") Signed-off-by: Duoming Zhou Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT

2025-07-17T16:35:20+00:00

[ Upstream commit 3cdf199d4755d477972ee87110b2aebc88b3cfad ] When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin