kernel/linux.git/drivers/net/ethernet/broadcom, branch v5.4.151

bnxt_en: Fix TX timeout when TX ring size is set to the smallest

2021-09-30T08:09:23+00:00

[ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ] The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Fix enabling network interfaces without VFs

2021-09-22T10:26:39+00:00

commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream. This function is called to enable SR-IOV when available, not enabling interfaces without VFs was a regression. Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()") Signed-off-by: Adrian Bunk Reported-by: YunQiang Su Tested-by: YunQiang Su Cc: stable@vger.kernel.org Acked-by: Shai Malin Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnxt_en: Add missing DMA memory barriers

2021-08-26T12:36:18+00:00

[ Upstream commit 828affc27ed43441bd1efdaf4e07e96dd43a0362 ] Each completion ring entry has a valid bit to indicate that the entry contains a valid completion event. The driver's main poll loop __bnxt_poll_work() has the proper dma_rmb() to make sure the valid bit of the next entry has been checked before proceeding further. But when we call bnxt_rx_pkt() to process the RX event, the RX completion event consists of two completion entries and only the first entry has been checked to be valid. We need the same barrier after checking the next completion entry. Add missing dma_rmb() barriers in bnxt_rx_pkt() and other similar locations. Fixes: 67a95e2022c7 ("bnxt_en: Need memory barrier when processing the completion ring.") Reported-by: Lance Richardson Reviewed-by: Andy Gospodarek Reviewed-by: Lance Richardson Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt: disable napi before canceling DIM

2021-08-26T12:36:17+00:00

[ Upstream commit 01cca6b9330ac7460de44eeeb3a0607f8aae69ff ] napi schedules DIM, napi has to be disabled first, then DIM canceled. Noticed while reading the code. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Reviewed-by: Michael Chan Reviewed-by: Edwin Peer Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt: don't lock the tx queue from napi poll

2021-08-26T12:36:17+00:00

[ Upstream commit 3c603136c9f82833813af77185618de5af67676c ] We can't take the tx lock from the napi poll routine, because netpoll can poll napi at any moment, including with the tx lock already held. The tx lock is protecting against two paths - the disable path, and (as Michael points out) the NETDEV_TX_BUSY case which may occur if NAPI completions race with start_xmit and both decide to re-enable the queue. For the disable/ifdown path use synchronize_net() to make sure closing the device does not race we restarting the queues. Annotate accesses to dev_state against data races. For the NAPI cleanup vs start_xmit path - appropriate barriers are already in place in the main spot where Tx queue is stopped but we need to do the same careful dance in the TX_BUSY case. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan Reviewed-by: Edwin Peer Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnx2x: fix an error code in bnx2x_nic_load()

2021-08-12T11:20:58+00:00

[ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ] Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear

2021-07-28T11:31:01+00:00

commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream. Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Check abort error state in bnxt_half_open_nic()

2021-07-28T11:30:57+00:00

[ Upstream commit 11a39259ff79b74bc99f8b7c44075a2d6d5e7ab1 ] bnxt_half_open_nic() is called during during ethtool self test and is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_half_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The ethtool self test will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_half_open_nic() were to continue in this error state, it may crash like this: bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Process ethtool (pid: 333327, stack limit = 0x0000000046476577) Call trace: bnxt_alloc_mem+0x444/0xef0 [bnxt_en] bnxt_half_open_nic+0x24/0xb8 [bnxt_en] bnxt_self_test+0x2dc/0x390 [bnxt_en] ethtool_self_test+0xe0/0x1f8 dev_ethtool+0x1744/0x22d0 dev_ioctl+0x190/0x3e0 sock_ioctl+0x238/0x480 do_vfs_ioctl+0xc4/0x758 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_handler+0xb0/0x180 el0_svc+0x8/0xc Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()

2021-07-28T11:30:57+00:00

[ Upstream commit 6cd657cb3ee6f4de57e635b126ffbe0e51d00f1a ] In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after we acquire the rtnl_lock. If the flag is set, we need to abort. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()

2021-07-28T11:30:57+00:00

[ Upstream commit 2c9f046bc377efd1f5e26e74817d5f96e9506c86 ] The capabilities can change after firmware upgrade/downgrade, so we should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe() is called. Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin