kernel/linux.git/drivers/net/ethernet/broadcom, branch v5.4.113

bnxt_en: reliably allocate IRQ table on reset to avoid crash

2021-03-17T16:03:38+00:00

commit 20d7d1c5c9b11e9f538ed4a2289be106de970d3e upstream. The following trace excerpt corresponds with a NULL pointer dereference of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many device resets: Unable to handle kernel NULL pointer dereference at ... 000000d ... pc : string+0x3c/0x80 lr : vsnprintf+0x294/0x7e0 sp : ffff00000f61ba70 pstate : 20000145 x29: ffff00000f61ba70 x28: 000000000000000d x27: ffff0000009c8b5a x26: ffff00000f61bb80 x25: ffff0000009c8b5a x24: 0000000000000012 x23: 00000000ffffffe0 x22: ffff000008990428 x21: ffff00000f61bb80 x20: 000000000000000d x19: 000000000000001f x18: 0000000000000000 x17: 0000000000000000 x16: ffff800b6d0fb400 x15: 0000000000000000 x14: ffff800b7fe31ae8 x13: 00001ed16472c920 x12: ffff000008c6b1c9 x11: ffff000008cf0580 x10: ffff00000f61bb80 x9 : 00000000ffffffd8 x8 : 000000000000000c x7 : ffff800b684b8000 x6 : 0000000000000000 x5 : 0000000000000065 x4 : 0000000000000001 x3 : ffff0a00ffffff04 x2 : 000000000000001f x1 : 0000000000000000 x0 : 000000000000000d Call trace: string+0x3c/0x80 vsnprintf+0x294/0x7e0 snprintf+0x44/0x50 __bnxt_open_nic+0x34c/0x928 [bnxt_en] bnxt_open+0xe8/0x238 [bnxt_en] __dev_open+0xbc/0x130 __dev_change_flags+0x12c/0x168 dev_change_flags+0x20/0x60 ... Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining) would not be expected on a system supporting MSIX at all. However, if bnxt_init_int_mode() does not end up being called after the call to bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will think that only INTA is supported and bp->irq_tbl will be NULL, causing the above crash. In the error recovery scenario, we call bnxt_clear_int_mode() in bnxt_fw_reset_close() early in the sequence. Ordinarily, we will call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we reestablish communication with the firmware after reset. However, if the sequence has to abort before we call bnxt_init_int_mode() and if the user later attempts to re-open the device, then it will cause the crash above. We fix it in 2 ways: 1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call bnxt_init_init_mode(). 2. If we need to abort in bnxt_hwrm_if_change() and cannot complete the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This will cause more drastic recovery at the next attempt to re-open the device, including a call to bnxt_init_int_mode(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Reviewed-by: Scott Branden Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnxt_en: reverse order of TX disable and carrier off

2021-03-04T09:26:16+00:00

[ Upstream commit 132e0b65dc2b8bfa9721bfce834191f24fd1d7ed ] A TX queue can potentially immediately timeout after it is stopped and the last TX timestamp on that queue was more than 5 seconds ago with carrier still up. Prevent these intermittent false TX timeouts by bringing down carrier first before calling netif_tx_disable(). Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Improve stats context resource accounting with RDMA driver loaded.

2021-01-19T17:26:18+00:00

commit 869c4d5eb1e6fbda66aa790c48bdb946d71494a0 upstream. The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts used by the RDMA driver correctly when the RDMA driver is freeing the MSIX vectors. It assumes that if the RDMA driver is registered, the additional stats contexts will be needed. This is not true when the RDMA driver is about to unregister and frees the MSIX vectors. This slight error leads to over accouting of the stats contexts needed after the RDMA driver has unloaded. This will cause some firmware warning and error messages in dmesg during subsequent config. changes or ifdown/ifup. Fix it by properly accouting for extra stats contexts only if the RDMA driver is registered and MSIX vectors have been successfully requested. Fixes: c027c6b4e91f ("bnxt_en: get rid of num_stat_ctxs variable") Reviewed-by: Yongping Zhang Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE

2021-01-12T19:16:11+00:00

[ Upstream commit 54ddbdb024882e226055cc4c3c246592ddde2ee5 ] The driver is already allocating receive buffers of 2KiB and the Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Florian Fainelli Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: Fix a resource leak in an error handling path in the probe functin

2020-12-30T10:51:27+00:00

[ Upstream commit 4375ada01963d1ebf733d60d1bb6e5db401e1ac6 ] If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20201212182005.120437-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Release PCI regions when DMA mask setup fails during probe.

2020-12-02T07:49:51+00:00

[ Upstream commit c54bc3ced5106663c2f2b44071800621f505b00e ] Jump to init_err_release to cleanup. bnxt_unmap_bars() will also be called but it will do nothing if the BARs are not mapped yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Jakub Kicinski Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/1605858271-8209-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: fix error return code in bnxt_init_board()

2020-12-02T07:49:50+00:00

[ Upstream commit 3383176efc0fb0c0900a191026468a58668b4214 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Hulk Robot Signed-off-by: Zhang Changzhong Reviewed-by: Edwin Peer Link: https://lore.kernel.org/r/1605792621-6268-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: fix error return code in bnxt_init_one()

2020-12-02T07:49:50+00:00

[ Upstream commit b5f796b62c98cd8c219c4b788ecb6e1218e648cb ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: c213eae8d3cd ("bnxt_en: Improve VF/PF link change logic.") Reported-by: Hulk Robot Signed-off-by: Zhang Changzhong Reviewed-by: Edwin Peer Link: https://lore.kernel.org/r/1605701851-20270-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: b44: fix error return code in b44_init_one()

2020-11-24T12:28:57+00:00

[ Upstream commit 7b027c249da54f492699c43e26cba486cfd48035 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 39a6f4bce6b4 ("b44: replace the ssb_dma API with the generic DMA API") Reported-by: Hulk Robot Signed-off-by: Zhang Changzhong Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/1605582131-36735-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnxt_en: read EEPROM A2h address using page 0

2020-11-24T12:28:55+00:00

[ Upstream commit 4260330b32b14330cfe427d568ac5f5b29b5be3d ] The module eeprom address range returned by bnxt_get_module_eeprom() should be 256 bytes of A0h address space, the lower half of the A2h address space, and page 0 for the upper half of the A2h address space. Fix the firmware call by passing page_number 0 for the A2h slave address space. Fixes: 42ee18fe4ca2 ("bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman