kernel/linux.git/drivers/net/ethernet/broadcom, branch v5.19

bnxt_en: Fix bnxt_refclk_read()

2022-07-13T03:35:56+00:00

The upper 32-bit PHC register is not latched when reading the lower 32-bit PHC register. Current code leaves a small window where we may not read correct higher order bits if the lower order bits are just about to wrap around. This patch fixes this by reading higher order bits twice and makes sure that final value is correctly paired with its lower 32 bits. Fixes: 30e96f487f64 ("bnxt_en: Do not read the PTP PHC during chip reset") Cc: Richard Cochran Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: Fix and simplify XDP transmit path

2022-07-13T03:35:55+00:00

Fix the missing length hint in the TX BD for the XDP transmit path. The length hint is required on legacy chips. Also, simplify the code by eliminating the first_buf local variable. tx_buf contains the same value. The opaque value only needs to be set on the first BD. Fix this also for correctness. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: fix livepatch query

2022-07-13T03:35:55+00:00

In the livepatch query fw_target BNXT_FW_SRT_PATCH is applicable for P5 chips only. Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Reviewed-by: Saravanan Vajravel Reviewed-by: Somnath Kotur Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: Fix bnxt_reinit_after_abort() code path

2022-07-13T03:35:55+00:00

bnxt_reinit_after_abort() is called during ifup when a previous FW reset sequence has aborted or a previous ifup has failed after detecting FW reset. In all cases, it is safe to assume that a previous FW reset has completed and the driver may not have fully reinitialized. Prior to this patch, it is assumed that the FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be set by the firmware in bnxt_hwrm_if_change(). This may not be true if the driver has already attempted to register with the firmware. The firmware may not set the RESET_DONE flag again after the driver has registered, assuming that the driver has seen the flag already. Fix it to always go through the FW reset initialization path if the BNXT_STATE_FW_RESET_DET flag is set. This flag is always set by the driver after successfully going through bnxt_reinit_after_abort(). Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: reclaim max resources if sriov enable fails

2022-07-13T03:35:54+00:00

If bnxt_sriov_enable() fails after some resources have been reserved for the VFs, the current code is not unwinding properly and the reserved resources become unavailable afterwards. Fix it by properly unwinding with a call to bnxt_hwrm_func_qcaps() to reset all maximum resources. Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA driver know to abort. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Kashyap Desai Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

net: bgmac: Fix an erroneous kfree() in bgmac_remove()

2022-06-15T02:16:36+00:00

'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski

Merge tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-06-09T19:06:52+00:00

Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - eth: amt: fix possible null-ptr-deref in amt_rcv() Previous releases - regressions: - tcp: use alloc_large_system_hash() to allocate table_perturb - af_unix: fix a data-race in unix_dgram_peer_wake_me() - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF Previous releases - always broken: - ipv6: fix signed integer overflow in __ip6_append_data - netfilter: - nat: really support inet nat without l3 address - nf_tables: memleak flow rule from commit path - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs - openvswitch: fix misuse of the cached connection on tuple changes - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred - eth: altera: fix refcount leak in altera_tse_mdio_create Misc: - add Quentin Monnet to bpftool maintainers" * tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: amd-xgbe: fix clang -Wformat warning tcp: use alloc_large_system_hash() to allocate table_perturb net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY net: dsa: mv88e6xxx: correctly report serdes link failure net: dsa: mv88e6xxx: fix BMSR error to be consistent with others net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete net: altera: Fix refcount leak in altera_tse_mdio_create net: openvswitch: fix misuse of the cached connection on tuple changes net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag ip_gre: test csum_start instead of transport header au1000_eth: stop using virt_to_bus() ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg ipv6: Fix signed integer overflow in __ip6_append_data nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION net: ipv6: unexport __init-annotated seg6_hmac_init() net: xfrm: unexport __init-annotated xfrm4_protocol_init() net: mdio: unexport __init-annotated mdio_bus_init() ...

net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_register

2022-06-06T21:38:15+00:00

of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: Miaoqian Lin Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220603133238.44114-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski

Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux

2022-06-04T21:04:27+00:00

Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...

eth: tg3: silence the GCC 12 array-bounds warning

2022-05-22T21:21:11+00:00

GCC 12 currently generates a rather inconsistent warning: drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds] 17795 | struct tg3_napi *tnapi = &tp->napi[i]; | ~~~~~~~~^~~ i is guaranteed < tp->irq_max which in turn is either 1 or 5. There are more loops like this one in the driver, but strangely GCC 12 dislikes only this single one. Silence this silliness for now. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller