kernel/linux.git/drivers/net/ethernet/broadcom, branch v5.15.7

bnxt_en: reject indirect blk offload when hw-tc-offload is off

2021-11-25T08:48:34+00:00

[ Upstream commit b0757491a118ae5727cf9f1c3a11544397d46596 ] The driver does not check if hw-tc-offload is enabled for the device before offloading a flow in the context of indirect block callback. Fix this by checking NETIF_F_HW_TC in the features flag and rejecting the offload request. This will avoid unnecessary dmesg error logs when hw-tc-offload is disabled, such as these: bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 Reported-by: Marcelo Ricardo Leitner Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Sriharsha Basavapatna Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bnx2x: fix variable dereferenced before check

2021-11-25T08:48:34+00:00

[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ] Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Check devlink allocation and registration status

2021-11-18T18:16:25+00:00

[ Upstream commit e624c70e1131e145bd0510b8a700b5e2d112e377 ] devlink is a software interface that doesn't depend on any hardware capabilities. The failure in SW means memory issues, wrong parameters, programmer error e.t.c. Like any other such interface in the kernel, the returned status of devlink APIs should be checked and propagated further and not ignored. Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors") Signed-off-by: Leon Romanovsky Reviewed-by: Edwin Peer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bgmac-platform: handle mac-address deferral

2021-09-27T11:28:15+00:00

This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

bnxt_en: Fix TX timeout when TX ring size is set to the smallest

2021-09-20T09:08:36+00:00

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller

net: bgmac-bcma: handle deferred probe error due to mac-address

2021-09-19T12:14:05+00:00

Due to the inclusion of nvmem handling into the mac-address getter function of_get_mac_address() by commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") it is now possible to get a -EPROBE_DEFER return code. Which did cause bgmac to assign a random ethernet address. This exact issue happened on my Meraki MR32. The nvmem provider is an EEPROM (at24c64) which gets instantiated once the module driver is loaded... This happens once the filesystem becomes available. With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. Then the driver subsystem will reschedule the probe at a later time. Cc: Petr Štetiar Cc: Michael Walle Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Christian Lamparter Signed-off-by: David S. Miller

Merge tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-09-16T20:05:42+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...

net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert

2021-09-16T13:09:30+00:00

Remove the assert from the callback priv lookup function since it does not require RTNL lock and is already protected by flow_indr_block_lock. This will avoid warnings from being emitted to dmesg if the driver registers its callback after an ingress qdisc was created for a netdevice. The warnings started after the following patch was merged: commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

bnx2x: Fix enabling network interfaces without VFs

2021-09-15T02:26:48+00:00

This function is called to enable SR-IOV when available, not enabling interfaces without VFs was a regression. Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()") Signed-off-by: Adrian Bunk Reported-by: YunQiang Su Tested-by: YunQiang Su Cc: stable@vger.kernel.org Acked-by: Shai Malin Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org Signed-off-by: Jakub Kicinski

bnxt_en: Clean up completion ring page arrays completely

2021-09-13T11:31:13+00:00

We recently changed the completion ring page arrays to be dynamically allocated to better support the expanded range of ring depths. The cleanup path for this was not quite complete. It might cause the shutdown path to crash if we need to abort before the completion ring arrays have been allocated and initialized. Fix it by initializing the ring_mem->pg_arr to NULL after freeing the completion ring page array. Add a check in bnxt_free_ring() to skip referencing the rmem->pg_arr if it is NULL. Fixes: 03c7448790b8 ("bnxt_en: Don't use static arrays for completion ring pages") Reviewed-by: Andy Gospodarek Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller