kernel/linux.git/drivers/net/ethernet/broadcom, branch v4.4.171

bnx2x: Assign unique DMAE channel number for FW DMAE transactions.

2018-12-13T08:21:34+00:00

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ] Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmgenet: fix OF child-node lookup

2018-12-01T08:46:36+00:00

[ Upstream commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac ] Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Cc: stable # 3.15 Cc: David S. Miller Reviewed-by: Florian Fainelli Signed-off-by: Johan Hovold Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths

2018-11-27T15:07:57+00:00

[ Upstream commit 59663e42199c93d1d7314d1446f6782fc4b1eb81 ] This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by: Siva Reddy Kallam Acked-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: systemport: Fix wake-up interrupt race during resume

2018-10-20T07:52:37+00:00

[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ] The AON_PM_L2 is normally used to trigger and identify the source of a wake-up event. Since the RX_SYS clock is no longer turned off, we also have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and that interrupt remains active up until the magic packet detector is disabled which happens much later during the driver resumption. The race happens if we have a CPU that is entering the SYSTEMPORT INTRL2_0 handler during resume, and another CPU has managed to clear the wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we have the first CPU stuck in the interrupt handler with an interrupt cause that has been cleared under its feet, and so we keep returning IRQ_NONE and we never make any progress. This was not a problem before because we would always turn off the RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned off as well, thus not latching the interrupt. The fix is to make sure we do not enable either the MPD or BRCM_TAG_MATCH interrupts since those are redundant with what the AON_PM_L2 interrupt controller already processes and they would cause such a race to occur. Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER") Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Fix TX timeout during netpoll.

2018-10-20T07:52:35+00:00

[ Upstream commit 73f21c653f930f438d53eed29b5e4c65c8a0f906 ] The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet Reported-by: Song Liu Reviewed-by: Song Liu Tested-by: Song Liu Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: use MAC link status for fixed phy

2018-09-15T07:40:37+00:00

[ Upstream commit c3c397c1f16c51601a3fac4fe0c63ad8aa85a904 ] When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6ebb34c ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by: Doug Berger Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnx2x: Fix invalid memory access in rss hash config path.

2018-09-05T07:18:35+00:00

[ Upstream commit ae2dcb28c24794a87e424a726a1cf1a61980f52d ] Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bnxt_en: Fix for system hang if request_irq fails

2018-08-24T11:26:59+00:00

[ Upstream commit c58387ab1614f6d7fb9e244f214b61e7631421fc ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bnx2x: Fix receiving tx-timeout in error or recovery state.

2018-08-24T11:26:57+00:00

[ Upstream commit 484c016d9392786ce5c74017c206c706f29f823d ] Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tg3: Add higher cpu clock for 5762.

2018-07-25T08:18:17+00:00

[ Upstream commit 3a498606bb04af603a46ebde8296040b2de350d1 ] This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal Signed-off-by: Siva Reddy Kallam Reviewed-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman