kernel/linux.git/drivers/net/ethernet/broadcom, branch v4.19.16

bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

2019-01-13T08:51:11+00:00

commit 38355a5f9a22bfa5bd5b1bb79805aca39fa53729 upstream. This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Ivan Mironov Signed-off-by: Ivan Mironov Acked-by: Sudarsana Kalluru Signed-off-by: David S. Miller Cc: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

bnx2x: Send update-svid ramrod with retry/poll flags enabled

2019-01-13T08:50:59+00:00

[ Upstream commit 9061193c4ee065d3240fde06767c2e06ec61decc ] Driver sends update-SVID ramrod in the MFW notification path. If there is a pending ramrod, driver doesn't retry the command and storm firmware will never be updated with the SVID value. The patch adds changes to send update-svid ramrod in process context with retry/poll flags set. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Remove configured vlans as part of unload sequence.

2019-01-13T08:50:59+00:00

[ Upstream commit 04f05230c5c13b1384f66f5186a68d7499e34622 ] Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Clear fip MAC when fcoe offload support is disabled

2019-01-13T08:50:59+00:00

[ Upstream commit bbf666c1af916ed74795493c564df6fad462cc80 ] On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE. Add a software workaround to clear the bad fip mac address if no FCoE connections are supported. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Fix filling time in bnxt_fill_coredump_record()

2018-12-13T08:16:12+00:00

[ Upstream commit 8dc5ae2d48976764cf3498e97963fa06befefb0e ] Fix the year and month offset while storing it in bnxt_fill_coredump_record(). Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Assign unique DMAE channel number for FW DMAE transactions.

2018-12-13T08:16:11+00:00

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ] Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: systemport: Protect stop from timeout

2018-11-23T07:17:03+00:00

[ Upstream commit 7cb6a2a2c72c1ed8f42fb01f1a661281b568dead ] A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths

2018-11-23T07:17:03+00:00

[ Upstream commit 59663e42199c93d1d7314d1446f6782fc4b1eb81 ] This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by: Siva Reddy Kallam Acked-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: protect stop from timeout

2018-11-23T07:17:02+00:00

A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcmgenet_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcmgenet_netif_stop. There are currently only two users of the bcmgenet_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcmgenet_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcmgenet_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcmgenet_netif_start so it is moved into the driver open service. [ Upstream commit 09e805d2570a3a94f13dd9c9ad2bcab23da76e09 ] Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: fix OF child-node lookup

2018-11-13T19:08:51+00:00

commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac upstream. Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Cc: stable # 3.15 Cc: David S. Miller Reviewed-by: Florian Fainelli Signed-off-by: Johan Hovold Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman