kernel/linux.git/drivers/net/ethernet/broadcom, branch v4.14.263

bcmgenet: add WOL IRQ check

2022-01-27T08:01:01+00:00

commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: systemport: Add global locking for descriptor lifecycle

2021-12-22T08:18:00+00:00

commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 upstream. The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: bnx2x: fix variable dereferenced before check

2021-11-26T10:40:39+00:00

[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ] Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Fix TX timeout when TX ring size is set to the smallest

2021-10-06T13:05:05+00:00

[ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ] The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Fix enabling network interfaces without VFs

2021-09-22T09:45:33+00:00

commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream. This function is called to enable SR-IOV when available, not enabling interfaces without VFs was a regression. Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()") Signed-off-by: Adrian Bunk Reported-by: YunQiang Su Tested-by: YunQiang Su Cc: stable@vger.kernel.org Acked-by: Shai Malin Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnxt: don't lock the tx queue from napi poll

2021-08-26T12:37:08+00:00

[ Upstream commit 3c603136c9f82833813af77185618de5af67676c ] We can't take the tx lock from the napi poll routine, because netpoll can poll napi at any moment, including with the tx lock already held. The tx lock is protecting against two paths - the disable path, and (as Michael points out) the NETDEV_TX_BUSY case which may occur if NAPI completions race with start_xmit and both decide to re-enable the queue. For the disable/ifdown path use synchronize_net() to make sure closing the device does not race we restarting the queues. Annotate accesses to dev_state against data races. For the NAPI cleanup vs start_xmit path - appropriate barriers are already in place in the main spot where Tx queue is stopped but we need to do the same careful dance in the TX_BUSY case. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan Reviewed-by: Edwin Peer Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnx2x: fix an error code in bnx2x_nic_load()

2021-08-15T11:03:29+00:00

[ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ] Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear

2021-07-28T09:12:20+00:00

commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream. Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: Ensure all TX/RX queues DMAs are disabled

2021-07-28T09:12:15+00:00

commit 2b452550a203d88112eaf0ba9fc4b750a000b496 upstream. Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: check return value after calling platform_get_resource()

2021-07-20T14:17:43+00:00

[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin