kernel/linux.git/drivers/net/ethernet/broadcom/bnxt, branch v6.2

bnxt_en: Fix mqprio and XDP ring checking logic

2023-02-13T09:57:59+00:00

In bnxt_reserve_rings(), there is logic to check that the number of TX rings reserved is enough to cover all the mqprio TCs, but it fails to account for the TX XDP rings. So the check will always fail if there are mqprio TCs and TX XDP rings. As a result, the driver always fails to initialize after the XDP program is attached and the device will be brought down. A subsequent ifconfig up will also fail because the number of TX rings is set to an inconsistent number. Fix the check to properly account for TX XDP rings. If the check fails, set the number of TX rings back to a consistent number after calling netdev_reset_tc(). Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Hongguang Gao Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnxt: Do not read past the end of test names

2023-01-20T12:52:29+00:00

Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by: Niklas Cassel Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook Reviewed-by: Michael Chan Reviewed-by: Niklas Cassel Signed-off-by: David S. Miller

bnxt: make sure we return pages to the pool

2023-01-12T04:48:37+00:00

Before the commit under Fixes the page would have been released from the pool before the napi_alloc_skb() call, so normal page freeing was fine (released page == no longer in the pool). After the change we just mark the page for recycling so it's still in the pool if the skb alloc fails, we need to recycle. Same commit added the same bug in the new bnxt_rx_multi_page_skb(). Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

bnxt_en: Fix HDS and jumbo thresholds for RX packets

2022-12-28T10:16:57+00:00

The recent XDP multi-buffer feature has introduced regressions in the setting of HDS and jumbo thresholds. HDS was accidentally disabled in the nornmal mode without XDP. This patch restores jumbo HDS placement when not in XDP mode. In XDP multi-buffer mode, HDS should be disabled and the jumbo threshold should be set to the usable page size in the first page buffer. Fixes: 32861236190b ("bnxt: change receive ring space parameters") Reviewed-by: Mohammad Shuab Siddique Reviewed-by: Ajit Khaparde Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnxt_en: Fix first buffer size calculations for XDP multi-buffer

2022-12-28T10:16:57+00:00

The size of the first buffer is always page size, and the useable space is the page size minus the offset and the skb_shared_info size. Make sure SKB and XDP buf sizes match so that the skb_shared_info is at the same offset seen from the SKB and XDP_BUF. build_skb() should be passed PAGE_SIZE. xdp_init_buff() should be passed PAGE_SIZE as well. xdp_get_shared_info_from_buff() will automatically deduct the skb_shared_info size if the XDP buffer has frags. There is no need to keep bp->xdp_has_frags. Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF since this constant is really the MTU with ethernet header size subtracted. Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses. Fixes: 32861236190b ("bnxt: change receive ring space parameters") Reviewed-by: Somnath Kotur Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnxt_en: Fix XDP RX path

2022-12-28T10:16:57+00:00

The XDP program can change the starting address of the RX data buffer and this information needs to be passed back from bnxt_rx_xdp() to bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly to the modified buffer address. Add back the data_ptr parameter to bnxt_rx_xdp() to make this work. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnxt_en: Simplify bnxt_xdp_buff_init()

2022-12-28T10:16:57+00:00

bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters, so no need to pass in the addresses of these parameters. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek Reviewed-by: Somnath Kotur Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnxt_en: fix devlink port registration to netdev

2022-12-28T10:16:56+00:00

We don't register a devlink port in case of a VF so avoid setting the devlink pointer to netdev. Also, SET_NETDEV_DEVLINK_PORT has to be moved so that we determine whether the device is PF/VF first. This fixes the NULL pointer dereference of devlink_port->devlink when creating VFs: BUG: kernel NULL pointer dereference, address: 0000000000000160 PGD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 14 PID: 388 Comm: kworker/14:1 Kdump: loaded Not tainted 6.1.0-rc8 #5 Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021 Workqueue: events work_for_cpu_fn RIP: 0010:devlink_nl_port_handle_size+0xb/0x50 Code: 83 c4 10 5b 5d c3 cc cc cc cc b8 a6 ff ff ff eb de e8 c9 59 21 00 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 8b 47 20 <48> 8b a8 60 01 00 00 48 8b 45 60 48 8b 38 e8 92 90 1a 00 48 8b 7d RSP: 0018:ff4fe5394846fcd8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000794 RCX: 0000000000000000 RDX: ff1f129683a30a40 RSI: 0000000000000008 RDI: ff1f1296bb496188 RBP: 0000000000000334 R08: 0000000000000cc0 R09: 0000000000000000 R10: ff1f1296bb494298 R11: ffffffffffffffc0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1f1296bb494000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ff1f129e5fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000160 CR3: 000000131f610006 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: if_nlmsg_size+0x14a/0x220 rtmsg_ifinfo_build_skb+0x3c/0x100 rtmsg_ifinfo+0x9c/0xc0 register_netdevice+0x59d/0x670 register_netdev+0x1c/0x40 bnxt_init_one+0x674/0xa60 [bnxt_en] local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 ? rescuer_thread+0x390/0x390 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xd6/0x100 ? kthread_complete_and_exit+0x20/0x20 Fixes: ac73d4bf2cda ("net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_port") Cc: Jiri Pirko Signed-off-by: Vikas Gupta Reviewed-by: Andy Gospodarek Reviewed-by: Kalesh Anakkur Purayil Reviewed-by: Damodharam Ammepalli Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnxt: Use generic HBH removal helper in tx path

2022-12-12T23:41:44+00:00

Eric Dumazet implemented Big TCP that allowed bigger TSO/GRO packet sizes for IPv6 traffic. See patch series: 'commit 89527be8d8d6 ("net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes")' This reduces the number of packets traversing the networking stack and should usually improves performance. However, it also inserts a temporary Hop-by-hop IPv6 extension header. Using the HBH header removal method in the previous patch, the extra header be removed in bnxt drivers to allow it to send big TCP packets (bigger TSO packets) as well. Tested: Compiled locally To further test functional correctness, update the GSO/GRO limit on the physical NIC: ip link set eth0 gso_max_size 181000 ip link set eth0 gro_max_size 181000 Note that if there are bonding or ipvan devices on top of the physical NIC, their GSO sizes need to be updated as well. Then, IPv6/TCP packets with sizes larger than 64k can be observed. Signed-off-by: Coco Li Reviewed-by: Michael Chan Tested-by: Michael Chan Link: https://lore.kernel.org/r/20221210041646.3587757-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski

bnxt: report FEC block stats via standard interface

2022-12-02T00:34:52+00:00

I must have missed that these stats are only exposed via the unstructured ethtool -S when they got merged. Plumb in the structured form. Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20221130013108.90062-1-kuba@kernel.org Signed-off-by: Jakub Kicinski