kernel/linux.git/drivers/net/ethernet/arc, branch v6.6.132

net: ethernet: arc: emac: quiesce interrupts before requesting IRQ

2026-03-25T10:05:53+00:00

commit 2503d08f8a2de618e5c3a8183b250ff4a2e2d52c upstream. Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before requesting the IRQ: disable all EMAC interrupt sources and clear any pending EMAC interrupt status bits. This keeps the change hardware-focused and minimal, while preventing spurious IRQ delivery from leftover state. Fixes: e4f2379db6c6 ("ethernet/arc/arc_emac - Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260309132409.584966-1-fanwu01@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: arc: rockchip: fix emac mdio node support

2024-11-14T12:19:32+00:00

[ Upstream commit 0a1c7a7b0adbf595ce7f218609db53749e966573 ] The binding emac_rockchip.txt is converted to YAML. Changed against the original binding is an added MDIO subnode. This make the driver failed to find the PHY, and given the 'mdio has invalid PHY address' it is probably looking in the wrong node. Fix emac_mdio.c so that it can handle both old and new device trees. Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes") Signed-off-by: Johan Jonker Tested-by: Andy Yan Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com Signed-off-by: Andy Yan Reviewed-by: Andrew Lunn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: arc: fix the device for dma_map_single/dma_unmap_single

2024-11-14T12:19:32+00:00

[ Upstream commit 71803c1dfa29e0d13b99e48fda11107cc8caebc7 ] The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent which has dma_mask, ndev->dev.parent is just pdev->dev. Or it would cause the following issue: [ 39.933526] ------------[ cut here ]------------ [ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8 Fixes: f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") Signed-off-by: David Wu Signed-off-by: Johan Jonker Signed-off-by: Andy Yan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: Explicitly include correct DT includes

2023-07-28T03:33:16+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Alex Elder Reviewed-by: Bhupesh Sharma Reviewed-by: Wei Fang Signed-off-by: Rob Herring Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org Signed-off-by: Jakub Kicinski

net: arc: Make arc_emac_remove() return void

2023-05-19T12:33:28+00:00

The function returns zero unconditionally. Change it to return void instead which simplifies its callers as error handing becomes unnecessary. Signed-off-by: Uwe Kleine-König Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: ethernet: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:26+00:00

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Reviewed-by: Petr Machata # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

eth: switch to netif_napi_add_weight()

2022-05-08T10:33:57+00:00

Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: arc_emac: Fix use after free in arc_mdio_probe()

2022-03-10T22:49:21+00:00

If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. Fixes: 95b5fc03c189 ("net: arc_emac: Make use of the helper function dev_err_probe()") Signed-off-by: Jianglei Nie Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-10-14T23:50:14+00:00

tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski

net: arc: select CRC32

2021-10-13T16:00:10+00:00

Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann Signed-off-by: Vegard Nossum Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski