kernel/linux.git/drivers/net/ethernet/arc, branch v5.15.208

net: ethernet: arc: emac: quiesce interrupts before requesting IRQ

2026-04-18T08:33:15+00:00

commit 2503d08f8a2de618e5c3a8183b250ff4a2e2d52c upstream. Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before requesting the IRQ: disable all EMAC interrupt sources and clear any pending EMAC interrupt status bits. This keeps the change hardware-focused and minimal, while preventing spurious IRQ delivery from leftover state. Fixes: e4f2379db6c6 ("ethernet/arc/arc_emac - Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260309132409.584966-1-fanwu01@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: arc: fix the device for dma_map_single/dma_unmap_single

2024-11-14T12:13:37+00:00

[ Upstream commit 71803c1dfa29e0d13b99e48fda11107cc8caebc7 ] The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent which has dma_mask, ndev->dev.parent is just pdev->dev. Or it would cause the following issue: [ 39.933526] ------------[ cut here ]------------ [ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8 Fixes: f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") Signed-off-by: David Wu Signed-off-by: Johan Jonker Signed-off-by: Andy Yan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

ethernet: use of_get_ethdev_address()

2023-07-27T06:47:00+00:00

[ Upstream commit 9ca01b25dffffecf6c59339aad6b4736680e9fa3 ] Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller Stable-dep-of: 1d6d537dc55d ("net: ethernet: mtk_eth_soc: handle probe deferral") Signed-off-by: Sasha Levin

of: net: move of_net under net/

2022-03-08T18:12:41+00:00

[ Upstream commit e330fb14590c5c80f7195c3d8c9b4bcf79e1a5cd ] Rob suggests to move of_net.c from under drivers/of/ somewhere to the networking code. Suggested-by: Rob Herring Signed-off-by: Jakub Kicinski Reviewed-by: Rob Herring Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: arc: select CRC32

2021-10-13T16:00:10+00:00

Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann Signed-off-by: Vegard Nossum Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski

dev_ioctl: split out ndo_eth_ioctl

2021-07-27T19:11:45+00:00

Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford Cc: Jason Gunthorpe Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Cc: Andrew Lunn Cc: Vivien Didelot Cc: Florian Fainelli Cc: Vladimir Oltean Cc: Leon Romanovsky Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann Acked-by: Jason Gunthorpe Signed-off-by: David S. Miller

net: arc: Demote non-compliant kernel-doc headers

2021-05-17T21:12:38+00:00

Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/arc/emac_rockchip.c:18: warning: expecting prototype for emac(). Prototype was for DRV_NAME() instead Signed-off-by: Yang Shen Reviewed-by: Heiko Stuebner Signed-off-by: David S. Miller

of: net: pass the dst buffer to of_get_mac_address()

2021-04-13T21:35:02+00:00

of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

drivers/net/ethernet: add some basic kdoc tags

2020-09-25T23:29:00+00:00

A couple of drivers had a "generic documentation" section that would trigger a "can't understand" message from W=1 compiles. Fix by using correct DOC: tags in the generic sections. Fixed Warnings: drivers/net/ethernet/arc/emac_arc.c:4: info: Scanning doc for c drivers/net/ethernet/cadence/macb_pci.c:3: warning: missing initial short description on line: * Cadence GEM PCI wrapper. drivers/net/ethernet/cadence/macb_pci.c:3: info: Scanning doc for Cadence Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller

net: arc_emac: Fix memleak in arc_mdio_probe

2020-08-25T00:59:44+00:00

When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller