kernel/linux.git/drivers/net/ethernet/amd, branch v6.12.80

amd-xgbe: prevent CRC errors during RX adaptation with AN disabled

2026-03-25T10:08:28+00:00

[ Upstream commit 27a4dd0c702b3b2b9cf2c045d100cc2fe8720b81 ] When operating in 10GBASE-KR mode with auto-negotiation disabled and RX adaptation enabled, CRC errors can occur during the RX adaptation process. This happens because the driver continues transmitting and receiving packets while adaptation is in progress. Fix this by stopping TX/RX immediately when the link goes down and RX adaptation needs to be re-triggered, and only re-enabling TX/RX after adaptation completes and the link is confirmed up. Introduce a flag to track whether TX/RX was disabled for adaptation so it can be restored correctly. This prevents packets from being transmitted or received during the RX adaptation window and avoids CRC errors from corrupted frames. The flag tracking the data path state is synchronized with hardware state in xgbe_start() to prevent stale state after device restarts. This ensures that after a restart cycle (where xgbe_stop disables TX/RX and xgbe_start re-enables them), the flag correctly reflects that the data path is active. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju Link: https://patch.msgid.link/20260306111629.1515676-3-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

amd-xgbe: fix link status handling in xgbe_rx_adaptation

2026-03-25T10:08:28+00:00

[ Upstream commit 6485cb96be5cd0f4bf39554737ba11322cc9b053 ] The link status bit is latched low to allow detection of momentary link drops. If the status indicates that the link is already down, read it again to obtain the current state. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju Link: https://patch.msgid.link/20260306111629.1515676-2-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

amd-xgbe: fix sleep while atomic on suspend/resume

2026-03-13T16:20:43+00:00

[ Upstream commit e2f27363aa6d983504c6836dd0975535e2e9dba0 ] The xgbe_powerdown() and xgbe_powerup() functions use spinlocks (spin_lock_irqsave) while calling functions that may sleep: - napi_disable() can sleep waiting for NAPI polling to complete - flush_workqueue() can sleep waiting for pending work items This causes a "BUG: scheduling while atomic" error during suspend/resume cycles on systems using the AMD XGBE Ethernet controller. The spinlock protection in these functions is unnecessary as these functions are called from suspend/resume paths which are already serialized by the PM core Fix this by removing the spinlock. Since only code that takes this lock is xgbe_powerdown() and xgbe_powerup(), remove it completely. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Signed-off-by: Raju Rangoju Link: https://patch.msgid.link/20260302042124.1386445-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

amd-xgbe: fix MAC_TCR_SS register width for 2.5G and 10M speeds

2026-03-13T16:20:40+00:00

[ Upstream commit 9439a661c2e80485406ce2c90b107ca17858382d ] Extend the MAC_TCR_SS (Speed Select) register field width from 2 bits to 3 bits to properly support all speed settings. The MAC_TCR register's SS field encoding requires 3 bits to represent all supported speeds: - 0x00: 10Gbps (XGMII) - 0x02: 2.5Gbps (GMII) / 100Mbps - 0x03: 1Gbps / 10Mbps - 0x06: 2.5Gbps (XGMII) - P100a only With only 2 bits, values 0x04-0x07 cannot be represented, which breaks 2.5G XGMII mode on newer platforms and causes incorrect speed select values to be programmed. Fixes: 07445f3c7ca1 ("amd-xgbe: Add support for 10 Mbps speed") Co-developed-by: Guruvendra Punugupati Signed-off-by: Guruvendra Punugupati Signed-off-by: Raju Rangoju Link: https://patch.msgid.link/20260226170753.250312-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

amd-xgbe: avoid misleading per-packet error log

2026-01-30T09:28:39+00:00

[ Upstream commit c158f985cf6c2c36c99c4f67af2ff3f5ebe09f8f ] On the receive path, packet can be damaged because of buffer overflow in Rx FIFO. Avoid misleading per-packet error log when packet->errors is set, this can flood the log. Instead, rely on the standard rtnl_link_stats64 stats. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Signed-off-by: Raju Rangoju Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

amd-xgbe: reset retries and mode on RX adapt failures

2026-01-08T09:14:33+00:00

[ Upstream commit df60c332caf95d70f967aeace826e7e2f0847361 ] During the stress tests, early RX adaptation handshakes can fail, such as missing the RX_ADAPT ACK or not receiving a coefficient update before block lock is established. Continuing to retry RX adaptation in this state is often ineffective if the current mode selection is not viable. Resetting the RX adaptation retry counter when an RX_ADAPT request fails to receive ACK or a coefficient update prior to block lock, and clearing mode_set so the next bring-up performs a fresh mode selection rather than looping on a likely invalid configuration. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju Reviewed-by: Simon Horman Reviewed-by: Shyam Sundar S K Link: https://patch.msgid.link/20251215151728.311713-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

amd-xgbe: Avoid spurious link down messages during interface toggle

2025-10-23T14:20:29+00:00

[ Upstream commit 2616222e423398bb374ffcb5d23dea4ba2c3e524 ] During interface toggle operations (ifdown/ifup), the driver currently resets the local helper variable 'phy_link' to -1. This causes the link state machine to incorrectly interpret the state as a link change event, resulting in spurious "Link is down" messages being logged when the interface is brought back up. Preserve the phy_link state across interface toggles to avoid treating the -1 sentinel value as a legitimate link state transition. Fixes: 88131a812b16 ("amd-xgbe: Perform phy connect/disconnect at dev open/stop") Signed-off-by: Raju Rangoju Reviewed-by: Dawid Osuchowski Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

amd-xgbe: do not double read link status

2025-07-10T14:04:53+00:00

[ Upstream commit 16ceda2ef683a50cd0783006c0504e1931cd8879 ] The link status is latched low so that momentary link drops can be detected. Always double-reading the status defeats this design feature. Only double read if link was already down This prevents unnecessary duplicate readings of the link status. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju Reviewed-by: Simon Horman Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

amd-xgbe: align CL37 AN sequence as per databook

2025-07-10T14:04:53+00:00

[ Upstream commit 42fd432fe6d320323215ebdf4de4d0d7e56e6792 ] Update the Clause 37 Auto-Negotiation implementation to properly align with the PCS hardware specifications: - Fix incorrect bit settings in Link Status and Link Duplex fields - Implement missing sequence steps 2 and 7 These changes ensure CL37 auto-negotiation protocol follows the exact sequence patterns as specified in the hardware databook. Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation") Signed-off-by: Raju Rangoju Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

pds_core: remove write-after-free of client_id

2025-05-09T07:50:41+00:00

[ Upstream commit dfd76010f8e821b66116dec3c7d90dd2403d1396 ] A use-after-free error popped up in stress testing: [Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47): [Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core] [Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70 [Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180 [Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80 [Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0 [Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80 The actual device uninit usually happens on a separate thread scheduled after this code runs, but there is no guarantee of order of thread execution, so this could be a problem. There's no actual need to clear the client_id at this point, so simply remove the offending code. Fixes: 10659034c622 ("pds_core: add the aux client API") Signed-off-by: Shannon Nelson Reviewed-by: Simon Horman Link: https://patch.msgid.link/20250425203857.71547-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin