kernel/linux.git/drivers/net/ethernet/amd, branch v4.11.5

amd-xgbe: Fix the ECC-related bit position definitions

2017-03-23T02:39:58+00:00

The ECC bit positions that describe whether the ECC interrupt is for Tx, Rx or descriptor memory and whether the it is a single correctable or double detected error were defined in incorrectly (reversed order). Fix the bit position definitions for these settings so that the proper ECC handling is performed. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

amd-xgbe: Fix jumbo MTU processing on newer hardware

2017-03-15T22:36:59+00:00

Newer hardware does not provide a cumulative payload length when multiple descriptors are needed to handle the data. Once the MTU increases beyond the size that can be handled by a single descriptor, the SKB does not get built properly by the driver. The driver will now calculate the size of the data buffers used by the hardware. The first buffer of the first descriptor is for packet headers or packet headers and data when the headers can't be split. Subsequent descriptors in a multi-descriptor chain will not use the first buffer. The second buffer is used by all the descriptors in the chain for payload data. Based on whether the driver is processing the first, intermediate, or last descriptor it can calculate the buffer usage and build the SKB properly. Tested and verified on both old and new hardware. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

amd-xgbe: Enable IRQs only if napi_complete_done() is true

2017-03-10T02:31:28+00:00

Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync() and enable_irq() when an interrupt is received to process Rx packets. If the napi_complete_done() return value isn't checked an unbalanced enable for the IRQ could result, generating a warning stack trace. Update the driver to only enable interrupts if napi_complete_done() returns true. Reported-by: Jeremy Linton Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

drivers: net: ethernet: remove incorrect __exit markups

2017-03-02T22:33:49+00:00

Even if bus is not hot-pluggable, devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov Signed-off-by: David S. Miller

amd-xgbe: Don't overwrite SFP PHY mod_absent settings

2017-03-02T20:57:53+00:00

If an SFP module is not present, xgbe_phy_sfp_phy_settings() should return after applying the default settings. Currently there is no return statement and the default settings are overwritten. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

amd-xgbe: Be sure to set MDIO modes on device (re)start

2017-03-02T20:57:53+00:00

The MDIO register mode is set when the device is probed. But when the device is brought down and then back up, the MDIO register mode has been reset. Be sure to reset the mode during device startup and only change the mode of the address specified. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

amd-xgbe: Stop the PHY before releasing interrupts

2017-03-02T20:57:53+00:00

Some configurations require the use of the hardware's MDIO support to communicate with external PHYs. The MDIO commands indicate completion through the device interrupt. When bringing down the device the interrupts were released before stopping the external PHY, resulting in MDIO command timeouts. Move the stopping of the PHY to before the releasing of the interrupts. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

Merge tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-02-23T19:53:22+00:00

Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...

pcnet32: fix BNC/AUI port on AM79C970A

2017-02-14T19:26:58+00:00

Even though the port autoselection is enabled by default on AM79C970A, BNC/AUI port does not work because the link is always reported to be down. The link state reported by the chip belongs only to the TP port but the driver uses it regardless of the port used. The chip can't detect BNC/AUI link state. Disable port autoselection and use TP port by default to keep current behavior (link detection works on TP port, BNC/AUI port does not work). Implement ethtool autoneg, port and duplex configuration to allow using the BNC/AUI port. Report the TP link state only if the TP port is selected. When the port autoselection is enabled or AUI port is selected, report the link as always up. Move pcnet32_suspend() and pcnet32_clr_suspend() functions to avoid forward declarations. Signed-off-by: Ondrej Zary Signed-off-by: David S. Miller

pcnet32: factor out pcnet32_clr_suspend()

2017-02-14T19:26:57+00:00

Move the code to clear SUSPEND flag to a separate function to simplify code. Signed-off-by: Ondrej Zary Signed-off-by: David S. Miller