kernel/linux.git/drivers/net/ethernet/amazon, branch v5.4.151

net: ena: set initial DMA width to avoid intel iommu issue

2020-12-02T07:49:52+00:00

[ Upstream commit 09323b3bca95181c0da79daebc8b0603e500f573 ] The ENA driver uses the readless mechanism, which uses DMA, to find out what the DMA mask is supposed to be. If DMA is used without setting the dma_mask first, it causes the Intel IOMMU driver to think that ENA is a 32-bit device and therefore disables IOMMU passthrough permanently. This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48 before readless initialization in ena_device_init()->ena_com_mmio_reg_read_request_init(), which is large enough to workaround the intel_iommu issue. DMA mask is set again to the correct value after it's received from the device after readless is initialized. The patch also changes the driver to use dma_set_mask_and_coherent() function instead of the two pci_set_dma_mask() and pci_set_consistent_dma_mask() ones. Both methods achieve the same effect. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Mike Cui Signed-off-by: Arthur Kiyanovski Signed-off-by: Shay Agroskin Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ena: Make missed_tx stat incremental

2020-09-03T09:26:40+00:00

[ Upstream commit ccd143e5150f24b9ba15145c7221b61dd9e41021 ] Most statistics in ena driver are incremented, meaning that a stat's value is a sum of all increases done to it since driver/queue initialization. This patch makes all statistics this way, effectively making missed_tx statistic incremental. Also added a comment regarding rx_drops and tx_drops to make it clearer how these counters are calculated. Fixes: 11095fdb712b ("net: ena: add statistics for missed tx packets") Signed-off-by: Shay Agroskin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ena: Prevent reset after device destruction

2020-08-26T08:41:06+00:00

[ Upstream commit 63d4a4c145cca2e84dc6e62d2ef5cb990c9723c2 ] The reset work is scheduled by the timer routine whenever it detects that a device reset is required (e.g. when a keep_alive signal is missing). When releasing device resources in ena_destroy_device() the driver cancels the scheduling of the timer routine without destroying the reset work explicitly. This creates the following bug: The driver is suspended and the ena_suspend() function is called -> This function calls ena_destroy_device() to free the net device resources -> The driver waits for the timer routine to finish its execution and then cancels it, thus preventing from it to be called again. If, in its final execution, the timer routine schedules a reset, the reset routine might be called afterwards,and a redundant call to ena_restore_device() would be made. By changing the reset routine we allow it to read the device's state accurately. This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set before resetting the device and making both the destruction function and the flag check are under rtnl lock. The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction routine. Also surround the flag check with 'likely' because we expect that the reset routine would be called only when ENA_FLAG_TRIGGER_RESET flag is set. The destruction of the timer and reset services in __ena_shutoff() have to stay, even though the timer routine is destroyed in ena_destroy_device(). This is to avoid a case in which the reset routine is scheduled after free_netdev() in __ena_shutoff(), which would create an access to freed memory in adapter->flags. Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Shay Agroskin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ena: fix error returning in ena_com_get_hash_function()

2020-06-22T07:30:51+00:00

[ Upstream commit e9a1de378dd46375f9abfd8de1e6f59ee114a793 ] In case the "func" parameter is NULL we now return "-EINVAL". This shouldn't happen in general, but when it does happen, this is the proper way to handle it. We also check func for NULL in the beginning of the function, as there is no reason to do all the work and realize in the end of the function it was useless. Signed-off-by: Sameeh Jubran Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net/ena: Fix build warning in ena_xdp_set()

2020-05-27T15:46:32+00:00

[ Upstream commit caec66198d137c26f0d234abc498866a58c64150 ] This fixes the following build warning in ena_xdp_set(), which is observed on aarch64 with 64KB page size. In file included from ./include/net/inet_sock.h:19, from ./include/net/ip.h:27, from drivers/net/ethernet/amazon/ena/ena_netdev.c:46: drivers/net/ethernet/amazon/ena/ena_netdev.c: In function \ ‘ena_xdp_set’: \ drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning: \ format ‘%lu’ \ expects argument of type ‘long unsigned int’, but argument 4 \ has type ‘int’ \ [-Wformat=] "Failed to set xdp program, the current MTU (%d) is \ larger than the maximum allowed MTU (%lu) while xdp is on", Signed-off-by: Gavin Shan Acked-by: Shay Agroskin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ena: Add PCI shutdown handler to allow safe kexec

2020-04-01T09:01:34+00:00

[ Upstream commit 428c491332bca498c8eb2127669af51506c346c7 ] Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan Signed-off-by: Guilherme G. Piccoli Acked-by: Sameeh Jubran Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ena: make ena rxfh support ETH_RSS_HASH_NO_CHANGE

2020-03-05T15:43:47+00:00

commit 470793a78ce344bd53d31e0c2d537f71ba957547 upstream. As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing the key or indirection table using ethtool while keeping the same hash function. Also add a function for retrieving the current hash function from the ena-com layer. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran Signed-off-by: Saeed Bshara Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ena: ena-com.c: prevent NULL pointer dereference

2020-03-05T15:43:40+00:00

[ Upstream commit c207979f5ae10ed70aff1bb13f39f0736973de99 ] comp_ctx can be NULL in a very rare case when an admin command is executed during the execution of ena_remove(). The bug scenario is as follows: * ena_destroy_device() sets the comp_ctx to be NULL * An admin command is executed before executing unregister_netdev(), this can still happen because our device can still receive callbacks from the netdev infrastructure such as ethtool commands. * When attempting to access the comp_ctx, the bug occurs since it's set to NULL Fix: Added a check that comp_ctx is not NULL Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ena: ethtool: use correct value for crc32 hash

2020-03-05T15:43:40+00:00

[ Upstream commit 886d2089276e40d460731765083a741c5c762461 ] Up till kernel 4.11 there was no enum defined for crc32 hash in ethtool, thus the xor enum was used for supporting crc32. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ena: fix corruption of dev_idx_to_host_tbl

2020-03-05T15:43:40+00:00

[ Upstream commit e3f89f91e98ce07dc0f121a3b70d21aca749ba39 ] The function ena_com_ind_tbl_convert_from_device() has an overflow bug as explained below. Either way, this function is not needed at all since we don't retrieve the indirection table from the device at any point which means that this conversion is not needed. The bug: The for loop iterates over all io_sq_queues, when passing the actual number of used queues the io_sq_queues[i].idx equals 0 since they are uninitialized which results in the following code to be executed till the end of the loop: dev_idx_to_host_tbl[0] = i; This results dev_idx_to_host_tbl[0] in being equal to ENA_TOTAL_NUM_QUEUES - 1. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin