kernel/linux.git/drivers/net/ethernet/Makefile, branch v6.19.12

net: rnpgbe: Add build support for rnpgbe

2025-11-05T02:11:36+00:00

Add build options and doc for mucse. Initialize pci device access for MUCSE devices. Signed-off-by: Dong Yibo Reviewed-by: Andrew Lunn Reviewed-by: Vadim Fedorenko Reviewed-by: MD Danish Anwar Link: https://patch.msgid.link/20251101013849.120565-2-dong100@mucse.com Signed-off-by: Jakub Kicinski

net: spacemit: Add K1 Ethernet MAC

2025-09-16T10:43:49+00:00

The Ethernet MACs found on SpacemiT K1 appears to be a custom design that only superficially resembles some other embedded MACs. SpacemiT refers to them as "EMAC", so let's just call the driver "k1_emac". Supports RGMII and RMII interfaces. Includes support for MAC hardware statistics counters. PTP support is not implemented. Signed-off-by: Vivian Wang Reviewed-by: Maxime Chevallier Reviewed-by: Vadim Fedorenko Reviewed-by: Troy Mitchell Tested-by: Junhui Liu Tested-by: Troy Mitchell Link: https://patch.msgid.link/20250914-net-k1-emac-v12-2-65b31b398f44@iscas.ac.cn Signed-off-by: Paolo Abeni

net: airoha: Move airoha_eth driver in a dedicated folder

2025-03-04T12:22:08+00:00

The airoha_eth driver has no codebase shared with mtk_eth_soc one. Moreover, the upcoming features (flowtable hw offloading, PCS, ..) will not reuse any code from MediaTek driver. Move the Airoha driver in a dedicated folder. Signed-off-by: Lorenzo Bianconi Signed-off-by: Paolo Abeni

net: ethernet: oa_tc6: implement register write operation

2024-09-12T03:53:42+00:00

Implement register write operation according to the control communication specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface document. Control write commands are used by the SPI host to write registers within the MAC-PHY. Each control write commands are composed of a 32 bits control command header followed by register write data. The MAC-PHY ignores the final 32 bits of data from the SPI host at the end of the control write command. The write command and data is also echoed from the MAC-PHY back to the SPI host to enable the SPI host to identify which register write failed in the case of any bus errors. Control write commands can write either a single register or multiple consecutive registers. When multiple consecutive registers are written, the address is automatically post-incremented by the MAC-PHY. Writing to any unimplemented or undefined registers shall be ignored and yield no effect. Reviewed-by: Andrew Lunn Signed-off-by: Parthiban Veerasooran Link: https://patch.msgid.link/20240909082514.262942-3-Parthiban.Veerasooran@microchip.com Signed-off-by: Jakub Kicinski

eth: fbnic: Add scaffolding for Meta's NIC driver

2024-07-15T19:50:42+00:00

Create a bare-bones PCI driver for Meta's NIC. Subsequent changes will flesh it out. Signed-off-by: Alexander Duyck Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/172079935646.1778861.9710282776096050607.stgit@ahduyck-xeon-server.home.arpa Signed-off-by: Jakub Kicinski

eth: fealnx: bring back this old driver

2023-03-09T07:22:04+00:00

This reverts commit d5e2d038dbece821f1af57acbeded3aa9a1832c1. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038dbec ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

eth: fealnx: delete the driver for Myson MTD-800

2022-10-27T11:32:08+00:00

The git history for this driver seems to be completely automated / tree wide changes. I can't find any boards or systems which would use this chip. Google search shows pictures of towel warmers and no networking products. Signed-off-by: Jakub Kicinski Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20221025184254.1717982-1-kuba@kernel.org Signed-off-by: Paolo Abeni

net: ethernet: adi: Add ADIN1110 support

2022-09-20T13:00:30+00:00

The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY designed for industrial Ethernet applications. It integrates an Ethernet PHY core with a MAC and all the associated analog circuitry, input and output clock buffering. ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers can be accessed through the MDIO MAC registers. We are registering an MDIO bus with custom read/write in order to let the PHY to be discovered by the PAL. This will let the ADIN1100 Linux driver to probe and take control of the PHY. The ADIN2111 is a low power, low complexity, two-Ethernet ports switch with integrated 10BASE-T1L PHYs and one serial peripheral interface (SPI) port. The device is designed for industrial Ethernet applications using low power constrained nodes and is compliant with the IEEE 802.3cg-2019 Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE). The switch supports various routing configurations between the two Ethernet ports and the SPI host port providing a flexible solution for line, daisy-chain, or ring network topologies. The ADIN2111 supports cable reach of up to 1700 meters with ultra low power consumption of 77 mW. The two PHY cores support the 1.0 V p-p operating mode and the 2.4 V p-p operating mode defined in the IEEE 802.3cg standard. The device integrates the switch, two Ethernet physical layer (PHY) cores with a media access control (MAC) interface and all the associated analog circuitry, and input and output clock buffering. The device also includes internal buffer queues, the SPI and subsystem registers, as well as the control logic to manage the reset and clock control and hardware pin configuration. Access to the PHYs is exposed via an internal MDIO bus. Writes/reads can be performed by reading/writing to the ADIN2111 MDIO registers via SPI. On probe, for each port, a struct net_device is allocated and registered. When both ports are added to the same bridge, the driver will enable offloading of frame forwarding at the hardware level. Driver offers STP support. Normal operation on forwarding state. Allows only frames with the 802.1d DA to be passed to the host when in any of the other states. When both ports of ADIN2111 belong to the same SW bridge a maximum of 12 FDB entries will offloaded by the hardware and are marked as such. Co-developed-by: Lennart Franzen Signed-off-by: Lennart Franzen Signed-off-by: Alexandru Tachici Signed-off-by: Paolo Abeni

net: txgbe: Add build support for txgbe

2022-06-30T03:57:06+00:00

Add doc build infrastructure for txgbe driver. Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices. Signed-off-by: Jiawen Wu Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski

net: ethernet: Add driver for Sunplus SP7021

2022-05-10T09:31:32+00:00

Add driver for Sunplus SP7021 SoC. Reviewed-by: Andrew Lunn Signed-off-by: Wells Lu Signed-off-by: Paolo Abeni