kernel/linux.git/drivers/net/ethernet/Kconfig, branch linux-6.9.y

net: ethernet: remove duplicated CONFIG_SUNGEM_PHY entry

2024-02-07T13:17:51+00:00

Both drivers/net/Kconfig and drivers/net/ethernet/Kconfig contain the same config entry: config SUNGEM_PHY tristate Commit f860b0522f65 ("drivers/net: Kconfig and Makefile cleanup") moved SUNGEM_PHY from drivers/net/Kconfig to drivers/net/ethernet/Kconfig. Shortly after it was applied, commit 19e2f6fe9601 ("net: Fix sungem_phy sharing.") added the second one to drivers/net/Kconfig. I kept the one in drivers/net/Kconfig because this CONFIG option controls the compilation of drivers/net/sungem_phy.c. Signed-off-by: Masahiro Yamada Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: restore alpha order to Ethernet devices in config

2023-03-10T07:36:28+00:00

The filename "wangxun" sorts between "intel" and "xscale", but xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the wrong place in the config front-ends. Move wangxun/Kconfig so the Wangxun devices appear in order in the user interface. Fixes: 3ce7547e5b71 ("net: txgbe: Add build support for txgbe") Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20230307221051.890135-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski

eth: fealnx: bring back this old driver

2023-03-09T07:22:04+00:00

This reverts commit d5e2d038dbece821f1af57acbeded3aa9a1832c1. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038dbec ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

eth: fealnx: delete the driver for Myson MTD-800

2022-10-27T11:32:08+00:00

The git history for this driver seems to be completely automated / tree wide changes. I can't find any boards or systems which would use this chip. Google search shows pictures of towel warmers and no networking products. Signed-off-by: Jakub Kicinski Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20221025184254.1717982-1-kuba@kernel.org Signed-off-by: Paolo Abeni

net: ethernet: adi: Add ADIN1110 support

2022-09-20T13:00:30+00:00

The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY designed for industrial Ethernet applications. It integrates an Ethernet PHY core with a MAC and all the associated analog circuitry, input and output clock buffering. ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers can be accessed through the MDIO MAC registers. We are registering an MDIO bus with custom read/write in order to let the PHY to be discovered by the PAL. This will let the ADIN1100 Linux driver to probe and take control of the PHY. The ADIN2111 is a low power, low complexity, two-Ethernet ports switch with integrated 10BASE-T1L PHYs and one serial peripheral interface (SPI) port. The device is designed for industrial Ethernet applications using low power constrained nodes and is compliant with the IEEE 802.3cg-2019 Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE). The switch supports various routing configurations between the two Ethernet ports and the SPI host port providing a flexible solution for line, daisy-chain, or ring network topologies. The ADIN2111 supports cable reach of up to 1700 meters with ultra low power consumption of 77 mW. The two PHY cores support the 1.0 V p-p operating mode and the 2.4 V p-p operating mode defined in the IEEE 802.3cg standard. The device integrates the switch, two Ethernet physical layer (PHY) cores with a media access control (MAC) interface and all the associated analog circuitry, and input and output clock buffering. The device also includes internal buffer queues, the SPI and subsystem registers, as well as the control logic to manage the reset and clock control and hardware pin configuration. Access to the PHYs is exposed via an internal MDIO bus. Writes/reads can be performed by reading/writing to the ADIN2111 MDIO registers via SPI. On probe, for each port, a struct net_device is allocated and registered. When both ports are added to the same bridge, the driver will enable offloading of frame forwarding at the hardware level. Driver offers STP support. Normal operation on forwarding state. Allows only frames with the 802.1d DA to be passed to the host when in any of the other states. When both ports of ADIN2111 belong to the same SW bridge a maximum of 12 FDB entries will offloaded by the hardware and are marked as such. Co-developed-by: Lennart Franzen Signed-off-by: Lennart Franzen Signed-off-by: Alexandru Tachici Signed-off-by: Paolo Abeni

net: txgbe: Add build support for txgbe

2022-06-30T03:57:06+00:00

Add doc build infrastructure for txgbe driver. Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices. Signed-off-by: Jiawen Wu Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski

net: ethernet: Add driver for Sunplus SP7021

2022-05-10T09:31:32+00:00

Add driver for Sunplus SP7021 SoC. Reviewed-by: Andrew Lunn Signed-off-by: Wells Lu Signed-off-by: Paolo Abeni

net: restore alpha order to Ethernet devices in config

2022-04-15T10:56:16+00:00

The displayed list of Ethernet devices in make menuconfig has gotten out of order. This is mostly due to changes in vendor names etc, but also because of new Microsoft entry in wrong place. This restores so that the display is in order even if the names of the sub directories are not. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

net/fungible: Kconfig, Makefiles, and MAINTAINERS

2022-02-27T10:51:23+00:00

Hook up the new driver to configuration and build. Signed-off-by: Dimitris Michailidis Signed-off-by: David S. Miller

net: vertexcom: Add MSE102x SPI support

2021-12-13T14:15:41+00:00

This implements an SPI protocol driver for Vertexcom MSE102x Homeplug GreenPHY chip. Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller