kernel/linux.git/drivers/net/dsa, branch v7.0.11

net: dsa: mt7530: preserve VLAN tags on trapped link-local frames

2026-06-01T15:54:48+00:00

[ Upstream commit 3ac85bcfd404b588298c95c6fba8aad4ad334f57 ] The BPC, RGAC1 and RGAC2 registers control the handling of link-local frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are correctly trapped to the CPU port, but the egress VLAN tag attribute was set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any VLAN tags from trapped frames before they reach the CPU. This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer Delay Requests) to arrive at the CPU without their VLAN tag, so they are delivered to the base network interface instead of the VLAN sub-interface. The DSA local_termination selftest confirms this: all link-local protocol tests on VLAN upper interfaces fail. Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default) so that the switch does not modify VLAN tags in trapped frames. This way VLAN-tagged frames retain their original tag and are delivered to the correct VLAN sub-interface, matching the behavior of non-trapped frames which pass through without VLAN tag modification. Fixes: 69ddba9d170b ("net: dsa: mt7530: fix handling of all link-local frames") Signed-off-by: Daniel Golle Acked-by: Chester A. Unal Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: mt7530: fix FDB entries not aging out with short timeout

2026-06-01T15:54:48+00:00

[ Upstream commit e824e40d0e841fab66ab7897d6c7b14dc81c66a7 ] The DSA forwarding selftests bridge_vlan_aware.sh and bridge_vlan_unaware.sh configure the bridge with ageing_time set to LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run learning_test() in lib.sh, which expects a learned FDB entry to be removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry persisted past the deadline and the "Found FDB record when should not" assertion failed. With msecs=10000, the algorithm in mt7530_set_ageing_time() finds AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the search from tmp_age_count=0). The per-entry aging counter is initialized to AGE_CNT when a MAC address is learned, so with AGE_CNT=0 new entries start with a counter value of 0, which the hardware treats as "already aged" and never removes, effectively disabling aging. Fix this by starting the search from tmp_age_count=1 to ensure entries always have a non-zero initial aging counter. For a 10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead: the timer ticks every 5 seconds and entries are removed after 2 ticks. Starting the search at AGE_CNT=1 raises the minimum representable ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time of 1 second would now make the loop fall through without setting age_count and age_unit, leaving them uninitialized when written to the MT7530_AAC hardware register. Set ds->ageing_time_min and ds->ageing_time_max so the DSA core validates the range before the callback is invoked, and drop the now-redundant range check from mt7530_set_ageing_time(). Fixes: ea6d5c924e39 ("net: dsa: mt7530: support setting ageing time") Signed-off-by: Daniel Golle Link: https://patch.msgid.link/7788ded12dc07b1bce329ec35fa70f4b45f3f9b7.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: realtek: rtl8365mb: fix mode mask calculation

2026-05-23T11:09:23+00:00

[ Upstream commit 0c078021d3861966614d5e594ee03587f0c9e74d ] The RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK macro was shifting the 4-bit mask (0xF) by only (_extint % 2) bits instead of (_extint % 2) * 4. This caused the mask to overlap with the adjacent nibble when configuring odd-numbered external interfaces, selecting the wrong bits entirely. Align the shift calculation with the existing ...MODE_OFFSET macro. Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Abdulkader Alrezej Signed-off-by: Mieczyslaw Nalewaj Reviewed-by: Luiz Angelo Daros de Luca Link: https://patch.msgid.link/400a6387-a444-4576-af6d-26be5410bce3@yahoo.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths

2026-03-19T16:26:40+00:00

Smatch reports: drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn: 'priv->clk' from clk_prepare_enable() not released on lines: 983,990. The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume() is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails. Add the missing clk_disable_unprepare() calls in the error paths to properly release the clock resource. Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks") Reviewed-by: Jonas Gorski Reviewed-by: Florian Fainelli Signed-off-by: Anas Iqbal Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com Signed-off-by: Jakub Kicinski

net: dsa: realtek: Fix LED group port bit for non-zero LED group

2026-03-12T02:03:21+00:00

The rtl8366rb_led_group_port_mask() function always returns LED port bit in LED group 0; the switch statement returns the same thing in all non-default cases. This means that the driver does not currently support configuring LEDs in non-zero LED groups. Fix this. Fixes: 32d617005475a71e ("net: dsa: realtek: add LED drivers for rtl8366rb") Signed-off-by: Marek Behún Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260311111237.29002-1-kabel@kernel.org Signed-off-by: Jakub Kicinski

net: dsa: microchip: Fix error path in PTP IRQ setup

2026-03-12T01:06:22+00:00

If request_threaded_irq() fails during the PTP message IRQ setup, the newly created IRQ mapping is never disposed. Indeed, the ksz_ptp_irq_setup()'s error path only frees the mappings that were successfully set up. Dispose the newly created mapping if the associated request_threaded_irq() fails at setup. Cc: stable@vger.kernel.org Fixes: d0b8fec8ae505 ("net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()") Signed-off-by: Bastien Curutchet (Schneider Electric) Reviewed-by: Simon Horman Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20260309-ksz-ptp-irq-fix-v1-1-757b3b985955@bootlin.com Signed-off-by: Jakub Kicinski

net: dsa: mxl862xx: don't set user_mii_bus

2026-03-11T02:18:13+00:00

The PHY addresses in the MII bus are not equal to the port addresses, so the bus cannot be assigned as user_mii_bus. Falling back on the user_mii_bus in case a PHY isn't declared in device tree will result in using the wrong (in this case: off-by-+1) PHY. Remove the wrong assignment. Fixes: 23794bec1cb60 ("net: dsa: add basic initial driver for MxL862xx switches") Suggested-by: Vladimir Oltean Signed-off-by: Daniel Golle Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/0f0df310fd8cab57e0e5e3d0831dd057fd05bcd5.1773103271.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski

net: dsa: sja1105: ensure phylink_replay_link_end() will not be missed

2026-03-07T01:48:01+00:00

Most errors that can occur in sja1105_static_config_reload() are fatal (example: fail to communicate with hardware), but not all are. For example, sja1105_static_config_upload() -> kcalloc() may fail, and if that happens, we have called phylink_replay_link_begin() but never phylink_replay_link_end(). Under that circumstance, all port phylink instances are left in a state where the resolver is stopped with the PHYLINK_DISABLE_REPLAY bit set. We have effectively disabled link management with no way to recover from this condition. Avoid that situation by ensuring phylink_replay_link_begin() is always paired with phylink_replay_link_end(), regardless of whether we faced any errors during switch reset, configuration reload and general state reload. Fixes: 0b2edc531e0b ("net: dsa: sja1105: let phylink help with the replay of link callbacks") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20260304220900.3865120-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: dsa: sja1105: reorder sja1105_reload_cbs() and phylink_replay_link_end()

2026-03-07T01:48:01+00:00

Move phylink_replay_link_end() as the last locked operation under sja1105_static_config_reload(). The purpose is to be able to goto this step from the error path of intermediate steps (we must call phylink_replay_link_end()). sja1105_reload_cbs() notably does not depend on port states or link speeds. See commit 954ad9bf13c4 ("net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload") which has discussed this issue specifically. Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20260304220900.3865120-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: dsa: realtek: rtl8365mb: remove ifOutDiscards from rx_packets

2026-03-06T02:27:04+00:00

rx_packets should report the number of frames successfully received: unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX counter) is incorrect and can undercount RX packets. RX drops are already reported via rx_dropped (e.g. etherStatsDropEvents), so there is no need to adjust rx_packets. This patch removes the subtraction of ifOutDiscards from rx_packets in rtl8365mb_stats_update(). Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/ Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Mieczyslaw Nalewaj Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Simon Horman Acked-by: Linus Walleij Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com Signed-off-by: Jakub Kicinski