kernel/linux.git/drivers/net/dsa, branch v6.18.48

net: dsa: mt7530: error out on failed reads in MT7531 PHY polling

2026-08-09T18:25:09+00:00

[ Upstream commit 77a9ebe8818cf6dd1699bd6728cb5d66307801d7 ] The MT7531 indirect PHY access functions poll MT7531_PHY_IAC through a helper which returns 0 when the underlying read fails, so a failed bus transaction clears MT7531_PHY_ACS_ST and the access carries on, returning garbage PHY register data to phylib. Poll using regmap_read_poll_timeout(), which stops on read errors and propagates them. These functions hold the MDIO bus lock across the whole sequence, so the unlocked regmap accesses remain correct. Remove the now-unused _mt7530_unlocked_read(). Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/79e85d68d210cc37342978171aa6432aa2954333.1785213071.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend

2026-08-09T18:25:09+00:00

[ Upstream commit b4ce102b2cd88424c5860fbbb20b9eb343a93bf4 ] bus->read() returns a negative errno on failure, but mt7530_regmap_read() assigns it to a u16, truncating e.g. -ETIMEDOUT into 0xff92, and returns success. The garbage word is then consumed as register data, and read-modify-write cycles write it back to the switch. Check both reads and propagate their errors. The same defect existed in mt7530_mii_read() since the driver was introduced and moved into the regmap backend unchanged. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/3c628e48276c2e5522c8795a6be60d11c7a76a7d.1785213071.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: realtek: fix memory leak in rtl8366rb_setup_led()

2026-07-24T14:16:39+00:00

[ Upstream commit 056a5087d87ead77dedbe9cf5bde53b7cd4b4651 ] led_classdev_register_ext() only reads init_data.devicename - it never stores the pointer. However, the caller allocated devicename with kasprintf() but never freed it, leaking the string memory. Fix it with a stack buffer to avoid dynamic buffers completely. Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb") Signed-off-by: David Yang Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260618140200.1888707-1-mmyangfl@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: sja1105: round up PTP perout pin duration

2026-07-24T14:16:38+00:00

[ Upstream commit aee5836273b07b439fb245fb43930664d8b78518 ] pin_duration is converted from the user-provided period to SJA1105 clock ticks and is later passed as the cycle_time argument to future_base_time(). Very small period values may become zero after the conversion, which can lead to a division by zero in future_base_time(). Round zero pin_duration up to 1 tick so that the smallest unsupported periods use the minimum non-zero hardware duration instead of passing zero to future_base_time(). Fixes: 747e5eb31d59 ("net: dsa: sja1105: configure the PTP_CLK pin as EXT_TS or PER_OUT") Signed-off-by: Aleksandrova Alyona Link: https://patch.msgid.link/20260618110508.53094-1-aga@itb.spb.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: qca8k: fix led devicename when using external mdio bus

2026-07-24T14:16:09+00:00

[ Upstream commit 0b7b378ce6cafbb948786cb6f17f406d94016c8c ] The qca8k dsa switch can use either an external or internal mdio bus. This depends on whether the mdio node is defined under the switch node itself. Upon registering the internal mdio bus, the internal_mdio_bus of the dsa switch is assigned to this bus. When an external mdio bus is used, the driver still uses the internal_mdio_bus id which is used to create the device names of the leds. This leads to the leds being prefixed with '(efault)' as the internal_mii_bus is null. So let's fix this by adding a null check and use the devicename of the external bus instead when an external bus is configured. Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support") Signed-off-by: George Moussalem Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260608-qca8k-leds-fix-v3-1-a915bb2f37ae@outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: mt7530: preserve VLAN tags on trapped link-local frames

2026-06-01T15:51:03+00:00

[ Upstream commit 3ac85bcfd404b588298c95c6fba8aad4ad334f57 ] The BPC, RGAC1 and RGAC2 registers control the handling of link-local frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are correctly trapped to the CPU port, but the egress VLAN tag attribute was set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any VLAN tags from trapped frames before they reach the CPU. This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer Delay Requests) to arrive at the CPU without their VLAN tag, so they are delivered to the base network interface instead of the VLAN sub-interface. The DSA local_termination selftest confirms this: all link-local protocol tests on VLAN upper interfaces fail. Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default) so that the switch does not modify VLAN tags in trapped frames. This way VLAN-tagged frames retain their original tag and are delivered to the correct VLAN sub-interface, matching the behavior of non-trapped frames which pass through without VLAN tag modification. Fixes: 69ddba9d170b ("net: dsa: mt7530: fix handling of all link-local frames") Signed-off-by: Daniel Golle Acked-by: Chester A. Unal Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: mt7530: fix FDB entries not aging out with short timeout

2026-06-01T15:51:03+00:00

[ Upstream commit e824e40d0e841fab66ab7897d6c7b14dc81c66a7 ] The DSA forwarding selftests bridge_vlan_aware.sh and bridge_vlan_unaware.sh configure the bridge with ageing_time set to LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run learning_test() in lib.sh, which expects a learned FDB entry to be removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry persisted past the deadline and the "Found FDB record when should not" assertion failed. With msecs=10000, the algorithm in mt7530_set_ageing_time() finds AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the search from tmp_age_count=0). The per-entry aging counter is initialized to AGE_CNT when a MAC address is learned, so with AGE_CNT=0 new entries start with a counter value of 0, which the hardware treats as "already aged" and never removes, effectively disabling aging. Fix this by starting the search from tmp_age_count=1 to ensure entries always have a non-zero initial aging counter. For a 10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead: the timer ticks every 5 seconds and entries are removed after 2 ticks. Starting the search at AGE_CNT=1 raises the minimum representable ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time of 1 second would now make the loop fall through without setting age_count and age_unit, leaving them uninitialized when written to the MT7530_AAC hardware register. Set ds->ageing_time_min and ds->ageing_time_max so the DSA core validates the range before the callback is invoked, and drop the now-redundant range check from mt7530_set_ageing_time(). Fixes: ea6d5c924e39 ("net: dsa: mt7530: support setting ageing time") Signed-off-by: Daniel Golle Link: https://patch.msgid.link/7788ded12dc07b1bce329ec35fa70f4b45f3f9b7.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: realtek: rtl8365mb: fix mode mask calculation

2026-05-23T11:07:04+00:00

[ Upstream commit 0c078021d3861966614d5e594ee03587f0c9e74d ] The RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK macro was shifting the 4-bit mask (0xF) by only (_extint % 2) bits instead of (_extint % 2) * 4. This caused the mask to overlap with the adjacent nibble when configuring odd-numbered external interfaces, selecting the wrong bits entirely. Align the shift calculation with the existing ...MODE_OFFSET macro. Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Abdulkader Alrezej Signed-off-by: Mieczyslaw Nalewaj Reviewed-by: Luiz Angelo Daros de Luca Link: https://patch.msgid.link/400a6387-a444-4576-af6d-26be5410bce3@yahoo.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths

2026-03-25T10:10:43+00:00

[ Upstream commit b48731849609cbd8c53785a48976850b443153fd ] Smatch reports: drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn: 'priv->clk' from clk_prepare_enable() not released on lines: 983,990. The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume() is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails. Add the missing clk_disable_unprepare() calls in the error paths to properly release the clock resource. Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks") Reviewed-by: Jonas Gorski Reviewed-by: Florian Fainelli Signed-off-by: Anas Iqbal Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: microchip: Fix error path in PTP IRQ setup

2026-03-19T15:08:40+00:00

commit 99c8c16a4aad0b37293cae213e15957c573cf79b upstream. If request_threaded_irq() fails during the PTP message IRQ setup, the newly created IRQ mapping is never disposed. Indeed, the ksz_ptp_irq_setup()'s error path only frees the mappings that were successfully set up. Dispose the newly created mapping if the associated request_threaded_irq() fails at setup. Cc: stable@vger.kernel.org Fixes: d0b8fec8ae505 ("net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()") Signed-off-by: Bastien Curutchet (Schneider Electric) Reviewed-by: Simon Horman Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20260309-ksz-ptp-irq-fix-v1-1-757b3b985955@bootlin.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman