kernel/linux.git/drivers/net/dsa, branch v6.1.124

net: dsa: microchip: Fix LAN937X set_ageing_time function

2025-01-09T12:29:58+00:00

[ Upstream commit bb9869043438af5b94230f94fb4c39206525d758 ] The aging count is not a simple 20-bit value but comprises a 3-bit multiplier and a 20-bit second time. The code tries to use the original multiplier which is 4 as the second count is still 300 seconds by default. As the 20-bit number is now too large for practical use there is an option to interpret it as microseconds instead of seconds. Fixes: 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time") Signed-off-by: Tristram Ha Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20241218020224.70590-3-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: microchip: add ksz_rmw8() function

2025-01-09T12:29:58+00:00

[ Upstream commit 6f1b986a43ce9aa67b11a7e54ac75530705d04e7 ] Add ksz_rmw8(), it will be used in the next patch. Signed-off-by: Oleksij Rempel Acked-by: Arun Ramadoss Reviewed-by: Florian Fainelli Signed-off-by: Paolo Abeni Stable-dep-of: bb9869043438 ("net: dsa: microchip: Fix LAN937X set_ageing_time function") Signed-off-by: Sasha Levin

net: dsa: microchip: Fix KSZ9477 set_ageing_time function

2025-01-09T12:29:58+00:00

[ Upstream commit 262bfba8ab820641c8cfbbf03b86d6c00242c078 ] The aging count is not a simple 11-bit value but comprises a 3-bit multiplier and an 8-bit second count. The code tries to use the original multiplier which is 4 as the second count is still 300 seconds by default. Fixes: 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time") Signed-off-by: Tristram Ha Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20241218020224.70590-2-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: felix: fix stuck CPU-injected packets with short taprio windows

2024-12-19T17:08:56+00:00

[ Upstream commit acfcdb78d5d4cdb78e975210c8825b9a112463f6 ] With this port schedule: tc qdisc replace dev $send_if parent root handle 100 taprio \ num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ map 0 1 2 3 4 5 6 7 \ base-time 0 cycle-time 10000 \ sched-entry S 01 1250 \ sched-entry S 02 1250 \ sched-entry S 04 1250 \ sched-entry S 08 1250 \ sched-entry S 10 1250 \ sched-entry S 20 1250 \ sched-entry S 40 1250 \ sched-entry S 80 1250 \ flags 2 ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this: increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l[4134.168]: port 2: send peer delay response failed It turns out that the driver can't take their TX timestamps because it can't transmit them in the first place. And there's nothing special about the Pdelay_Resp packets - they're just regular 68 byte packets. But with this taprio configuration, the switch would refuse to send even the ETH_ZLEN minimum packet size. This should have definitely not been the case. When applying the taprio config, the driver prints: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent without problems. Yet it's not. For the forwarding path, the configuration is fine, yet packets injected from Linux get stuck with this schedule no matter what. The first hint that the static guard bands are the cause of the problem is that reverting Michael Walle's commit 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") made things work. It must be that the guard bands are calculated incorrectly. I remembered that there is a magic constant in the driver, set to 33 ns for no logical reason other than experimentation, which says "never let the static guard bands get so large as to leave less than this amount of remaining space in the time slot, because the queue system will refuse to schedule packets otherwise, and they will get stuck". I had a hunch that my previous experimentally-determined value was only good for packets coming from the forwarding path, and that the CPU injection path needed more. I came to the new value of 35 ns through binary search, after seeing that with 544 ns (the bit time required to send the Pdelay_Resp packet at gigabit) it works. Again, this is purely experimental, there's no logic and the manual doesn't say anything. The new driver prints for this schedule look like this: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS So yes, the maximum MTU is now even smaller by 1 byte than before. This is maybe counter-intuitive, but makes more sense with a diagram of one time slot. Before: Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <----><----------------------------------------------> 33 ns 1217 ns static guard band useful Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <-----><---------------------------------------------> 35 ns 1215 ns static guard band useful The static guard band implemented by this switch hardware directly determines the maximum allowable MTU for that traffic class. The larger it is, the earlier the switch will stop scheduling frames for transmission, because otherwise they might overrun the gate close time (and avoiding that is the entire purpose of Michael's patch). So, we now have guard bands smaller by 2 ns, thus, in this particular case, we lose a byte of the maximum MTU. Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean Reviewed-by: Michael Walle Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

dsa: qca8k: Use nested lock to avoid splat

2024-12-14T18:54:44+00:00

[ Upstream commit 078e0d596f7b5952dad8662ace8f20ed2165e2ce ] qca8k_phy_eth_command() is used to probe the child MDIO bus while the parent MDIO is locked. This causes lockdep splat, reporting a possible deadlock. It is not an actually deadlock, because different locks are used. By making use of mutex_lock_nested() we can avoid this false positive. Signed-off-by: Andrew Lunn Link: https://patch.msgid.link/20241110175955.3053664-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: mv88e6xxx: Fix error when setting port policy on mv88e6393x

2024-11-01T00:56:04+00:00

[ Upstream commit 12bc14949c4a7272b509af0f1022a0deeb215fd8 ] mv88e6393x_port_set_policy doesn't correctly shift the ptr value when converting the policy format between the old and new styles, so the target register ends up with the ptr being written over the data bits. Shift the pointer to align with the format expected by mv88e6393x_port_policy_write(). Fixes: 6584b26020fc ("net: dsa: mv88e6xxx: implement .port_set_policy for Amethyst") Signed-off-by: Peter Rashleigh Reviewed-by: Simon Horman Message-ID: <20241016040822.3917-1-peter@rashleigh.ca> Signed-off-by: Andrew Lunn Signed-off-by: Sasha Levin

net: dsa: lan9303: ensure chip reset and wait for READY status

2024-10-17T13:22:27+00:00

commit 5c14e51d2d7df49fe0d4e64a12c58d2542f452ff upstream. Accessing device registers seems to be not reliable, the chip revision is sometimes detected wrongly (0 instead of expected 1). Ensure that the chip reset is performed via reset GPIO and then wait for 'Device Ready' status in HW_CFG register before doing any register initializations. Cc: stable@vger.kernel.org Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Anatolij Gustschin [alex: reworked using read_poll_timeout()] Signed-off-by: Alexander Sverdlin Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20241004113655.3436296-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: fix jumbo frames on 10/100 ports

2024-10-17T13:22:21+00:00

[ Upstream commit 2f3dcd0d39affe5b9ba1c351ce0e270c8bdd5109 ] All modern chips support and need the 10_100 bit set for supporting jumbo frames on 10/100 ports, so instead of enabling it only for 583XX enable it for everything except bcm63xx, where the bit is writeable, but does nothing. Tested on BCM53115, where jumbo frames were dropped at 10/100 speeds without the bit set. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: b53: allow lower MTUs on BCM5325/5365

2024-10-17T13:22:21+00:00

[ Upstream commit e4b294f88a32438baf31762441f3dd1c996778be ] While BCM5325/5365 do not support jumbo frames, they do support slightly oversized frames, so do not error out if requesting a supported MTU for them. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: b53: fix max MTU for BCM5325/BCM5365

2024-10-17T13:22:21+00:00

[ Upstream commit ca8c1f71c10193c270f772d70d34b15ad765d6a8 ] BCM5325/BCM5365 do not support jumbo frames, so we should not report a jumbo frame mtu for them. But they do support so called "oversized" frames up to 1536 bytes long by default, so report an appropriate MTU. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin