kernel/linux.git/drivers/net/dsa, branch v5.18.2

net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()

2022-05-12T17:01:36+00:00

After commit 2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of state->link") the interface suspend path would call our mac_link_down() call back which would forcibly set the link down, thus preventing Wake-on-LAN packets from reaching our management port. Fix this by looking at whether the port is enabled for Wake-on-LAN and not clearing the link status in that case to let packets go through. Fixes: 2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of state->link") Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20220512021731.2494261-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: mark traps with a bool instead of keeping them in a list

2022-05-06T02:15:14+00:00

Since the blamed commit, VCAP filters can appear on more than one list. If their action is "trap", they are chained on ocelot->traps via filter->trap_list. This is in addition to their normal placement on the VCAP block->rules list head. Therefore, when we free a VCAP filter, we must remove it from all lists it is a member of, including ocelot->traps. There are at least 2 bugs which are direct consequences of this design decision. First is the incorrect usage of list_empty(), meant to denote whether "filter" is chained into ocelot->traps via filter->trap_list. This does not do the correct thing, because list_empty() checks whether "head->next == head", but in our case, head->next == head->prev == NULL. So we dereference NULL pointers and die when we call list_del(). Second is the fact that not all places that should remove the filter from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(), which is where we have the main kfree(filter). By keeping freed filters in ocelot->traps we end up in a use-after-free in felix_update_trapping_destinations(). Attempting to fix all the buggy patterns is a whack-a-mole game which makes the driver unmaintainable. Actually this is what the previous patch version attempted to do: https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/ but it introduced another set of bugs, because there are other places in which create VCAP filters, not just ocelot_vcap_filter_create(): - ocelot_trap_add() - felix_tag_8021q_vlan_add_rx() - felix_tag_8021q_vlan_add_tx() Relying on the convention that all those code paths must call INIT_LIST_HEAD(&filter->trap_list) is not going to scale. So let's do what should have been done in the first place and keep a bool in struct ocelot_vcap_filter which denotes whether we are looking at a trapping rule or not. Iterating now happens over the main VCAP IS2 block->rules. The advantage is that we no longer risk having stale references to a freed filter, since it is only present in that list. Fixes: e42bd4ed09aa ("net: mscc: ocelot: keep traps in a list") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: b53: convert to phylink_pcs

2022-05-01T16:51:06+00:00

Convert B53 to use phylink_pcs for the serdes rather than hooking it into the MAC-layer callbacks. Fixes: 81c1681cbb9f ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: dsa: mt7530: add missing of_node_put() in mt7530_setup()

2022-04-30T02:23:55+00:00

Add of_node_put() if of_get_phy_mode() fails in mt7530_setup() Fixes: 0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20220428095317.538829-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski

net: dsa: ksz9477: port mirror sniffing limited to one port

2022-04-30T01:41:07+00:00

This patch limits the sniffing to only one port during the mirror add. And during the mirror_del it checks for all the ports using the sniff, if and only if no other ports are referring, sniffing is disabled. The code is updated based on the review comments of LAN937x port mirror patch. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210422094257.1641396-8-prasanna.vengateshan@microchip.com/ Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Prasanna Vengateshan Signed-off-by: Arun Ramadoss Link: https://lore.kernel.org/r/20220428070709.7094-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski

net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK

2022-04-27T00:32:52+00:00

Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp register. It helped bring this register into a well-defined state so the driver has to rely less on the bootloader to do things right. Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any possibility to configure it. Upon further testing it turns out that all boards which are supported by the GSWIP driver in OpenWrt which use an RMII PHY have a dedicated oscillator on the board which provides the 50MHz RMII reference clock. Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set the MAC also generates the RMII reference clock whose signal then conflicts with the signal from the oscillator on the board. This results in a constant cycle of the PHY detecting link up/down (and as a result of that: the two ports using the AR8030 PHYs are not working). At the time of writing this patch there's no known board where the MAC (GSWIP) has to generate the RMII reference clock. If needed this can be implemented in future by providing a device-tree flag so the GSWIP_MII_CFG_RMII_CLK bit can be toggled per port. Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") Tested-by: Jan Hoffmann Signed-off-by: Martin Blumenstingl Acked-by: Hauke Mehrtens Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski

net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr

2022-04-26T10:03:58+00:00

The other port_hidden functions rely on the port_read/port_write functions to access the hidden control port. These functions apply the offset for port_base_addr where applicable. Update port_hidden_wait to use the port_wait_bit so that port_base_addr offsets are accounted for when waiting for the busy bit to change. Without the offset the port_hidden_wait function would timeout on devices that have a non-zero port_base_addr (e.g. MV88E6141), however devices that have a zero port_base_addr would operate correctly (e.g. MV88E6390). Fixes: 609070133aff ("net: dsa: mv88e6xxx: update code operating on hidden registers") Signed-off-by: Nathan Rossi Reviewed-by: Marek Behún Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com Signed-off-by: Paolo Abeni

net: dsa: realtek: remove realtek,rtl8367s string

2022-04-22T22:17:53+00:00

There is no need to add new compatible strings for each new supported chip version. The compatible string is used only to select the subdriver (rtl8365mb.c or rtl8366rb.c). Once in the subdriver, it will detect the chip model by itself, ignoring which compatible string was used. Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/ Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Alvin Šipraga Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Acked-by: Arınç ÜNAL Link: https://lore.kernel.org/r/20220418233558.13541-2-luizluca@gmail.com Signed-off-by: Jakub Kicinski

net: dsa: felix: fix tagging protocol changes with multiple CPU ports

2022-04-14T06:52:26+00:00

When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni

net: dsa: realtek: don't parse compatible string for RTL8366S

2022-04-13T13:40:59+00:00

This switch is not even supported, but if someone were to actually put this compatible string "realtek,rtl8366s" in their device tree, they would be greeted with a kernel panic because the probe function would dereference NULL. So let's just remove it. Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/ Signed-off-by: Alvin Šipraga Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller