kernel/linux.git/drivers/net/dsa/mt7530.h, branch v6.4

net: dsa: mt7530: fix handling of LLDP frames

2023-06-20T08:40:26+00:00

LLDP frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat LLDP frames as regular multicast frames, therefore flooding them to user ports. To fix this, set LLDP frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL Reviewed-by: Vladimir Oltean Reviewed-by: Russell King (Oracle) Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP

2023-06-20T08:40:25+00:00

MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU frames (further restricted by PCR_MATRIX). Currently the driver sets the first CPU port as the single port in this bit mask, which works fine regardless of whether the device tree defines port 5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's logic of picking the first CPU port as the CPU port that all user ports are affine to, by default. An upcoming change would like to influence DSA's selection of the default CPU port to no longer be the first one, and in that case, this logic needs adaptation. Since there is no observed leakage or duplication of frames if all CPU ports are defined in this bit mask, simply include them all. Suggested-by: Russell King (Oracle) Suggested-by: Vladimir Oltean Signed-off-by: Arınç ÜNAL Reviewed-by: Vladimir Oltean Reviewed-by: Russell King (Oracle) Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: mt7530: fix support for MT7531BE

2023-04-20T00:37:45+00:00

There are two variants of the MT7531 switch IC which got different features (and pins) regarding port 5: * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes PCS * MT7531BE: RGMII Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function") works fine for MT7531AE which got two instances of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup clocks before the single PCS on port 6 (usually used as CPU port) starts to work and hence the PCS creation failed on MT7531BE. Fix this by introducing a pointer to mt7531_create_sgmii function in struct mt7530_priv and call it again at the end of mt753x_setup like it was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function"). Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function") Signed-off-by: Daniel Golle Acked-by: Arınç ÜNAL Link: https://lore.kernel.org/r/ZDvlLhhqheobUvOK@makrotopia.org Signed-off-by: Jakub Kicinski

net: dsa: mt7530: introduce driver for MT7988 built-in switch

2023-04-03T09:13:01+00:00

Add driver for the built-in Gigabit Ethernet switch which can be found in the MediaTek MT7988 SoC. The switch shares most of its design with MT7530 and MT7531, but has it's registers mapped into the SoCs register space rather than being connected externally or internally via MDIO. Introduce a new platform driver to support that. Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: mt7530: introduce separate MDIO driver

2023-04-03T09:13:00+00:00

Split MT7530 switch driver into a common part and a part specific for MDIO connected switches and multi-chip modules. Move MDIO-specific functions to newly introduced mt7530-mdio.c while keeping the common parts in mt7530.c. Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is implied by CONFIG_NET_DSA_MT7530. Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: mt7530: move p5_intf_modes() function to mt7530.c

2023-04-03T09:13:00+00:00

In preparation of splitting mt7530.c into a driver for MDIO-connected as well as MDIO-accessed built-in switches on one hand and MMIO-accessed built-in switches move the p5_inft_modes() function from mt7530.h to mt7530.c. The function is only needed there and will trigger a compiler warning about a defined but unused function otherwise when including mt7530.h in the to-be-introduced bus-specific drivers. Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: mt7530: use regmap to access switch register space

2023-04-03T09:13:00+00:00

Use regmap API to access the switch register space. Signed-off-by: Daniel Golle Signed-off-by: David S. Miller

net: dsa: mt7530: use external PCS driver

2023-03-21T02:48:41+00:00

Implement regmap access wrappers, for now only to be used by the pcs-mtk-lynxi driver. Make use of this external PCS driver and drop the now reduntant implementation in mt7530.c. As a nice side effect the SGMII registers can now also more easily be inspected for debugging via /sys/kernel/debug/regmap. Tested-by: Bjørn Mork Signed-off-by: Daniel Golle Tested-by: Frank Wunderlich Reviewed-by: Russell King (Oracle) Signed-off-by: Jakub Kicinski

net: dsa: mt7530: Separate C22 and C45 MDIO bus transactions

2023-01-18T03:34:07+00:00

mt7530 does support C45, but its uses a mix of registering its MDIO bus and providing its private MDIO bus to the DSA core, too. This makes the change a bit more complex. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Signed-off-by: Jakub Kicinski

net: dsa: mt7530: add support for in-band link status

2022-09-23T10:58:37+00:00

Read link status from SGMII PCS for in-band managed 2500Base-X and 1000Base-X connection on a MAC port of the MT7531. This is needed to get the SFP cage working which is connected to SGMII interface of port 5 of the MT7531 switch IC on the Bananapi BPi-R3 board. While at it also handle an_complete for both the autoneg and the non-autoneg codepath. Signed-off-by: Daniel Golle Signed-off-by: David S. Miller