kernel/linux.git/drivers/net/dsa/microchip, branch v6.1.87

net: dsa: microchip: fix register write order in ksz8_ind_write8()

2024-03-15T14:48:15+00:00

[ Upstream commit b7fb7729c94fb2d23c79ff44f7a2da089c92d81c ] This bug was noticed while re-implementing parts of the kernel driver in userspace using spidev. The goal was to enable some of the errata workarounds that Microchip describes in their errata sheet [1]. Both the errata sheet and the regular datasheet of e.g. the KSZ8795 imply that you need to do this for indirect register accesses: - write a 16-bit value to a control register pair (this value consists of the indirect register table, and the offset inside the table) - either read or write an 8-bit value from the data storage register (indicated by REG_IND_BYTE in the kernel) The current implementation has the order swapped. It can be proven, by reading back some indirect register with known content (the EEE register modified in ksz8_handle_global_errata() is one of these), that this implementation does not work. Private discussion with Oleksij Rempel of Pengutronix has revealed that the workaround was apparantly never tested on actual hardware. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdf Signed-off-by: Tobias Jakobi (Compleo) Reviewed-by: Oleksij Rempel Fixes: 7b6e6235b664 ("net: dsa: microchip: ksz8795: handle eee specif erratum") Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries

2023-09-13T07:42:23+00:00

[ Upstream commit 8d7ae22ae9f8c8a4407f8e993df64440bdbd0cee ] The commit (SHA1: 5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9477 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Signed-off-by: Lukasz Majewski Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: correct KSZ8795 static MAC table access

2023-07-27T06:50:42+00:00

[ Upstream commit 4bdf79d686b49ac49373b36466acfb93972c7d7c ] The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha Reviewed-by: Horatiu Vultur Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8_r_sta_mac_table(): Avoid using error code for empty entries

2023-07-27T06:50:41+00:00

[ Upstream commit 559901b46810e82ba5321a5e789f994b65d3bc3d ] Prepare for the next patch by ensuring that ksz8_r_sta_mac_table() does not use error codes for empty entries. This change will enable better handling of read/write errors in the upcoming patch. Signed-off-by: Oleksij Rempel Reviewed-by: Vladimir Oltean Signed-off-by: Paolo Abeni Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access") Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8: Make ksz8_r_sta_mac_table() static

2023-07-27T06:50:41+00:00

[ Upstream commit b5751cdd7dbe618a03951bdd4c982a71ba448b1b ] As ksz8_r_sta_mac_table() is only used within ksz8795.c, there is no need to export it. Make the function static for better encapsulation. Signed-off-by: Oleksij Rempel Reviewed-by: Vladimir Oltean Acked-by: Arun Ramadoss Signed-off-by: Paolo Abeni Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access") Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8: Separate static MAC table operations for code reuse

2023-07-27T06:50:41+00:00

[ Upstream commit f6636ff69ec4f2c94a5ee1d032b21cfe1e0a5678 ] Move static MAC table operations to separate functions in order to reuse the code for add/del_fdb. This is needed to address kernel warnings caused by the lack of fdb add function support in the current driver. Signed-off-by: Oleksij Rempel Reviewed-by: Vladimir Oltean Signed-off-by: Paolo Abeni Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access") Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8: fix MDB configuration with non-zero VID

2023-04-06T10:10:45+00:00

[ Upstream commit 9aa5757e1f71d85facdc3c98028762cbab8d15c7 ] FID is directly mapped to VID. However, configuring a MAC address with a VID != 0 resulted in incorrect configuration due to an incorrect bit mask. This kernel commit fixed the issue by correcting the bit mask and ensuring proper configuration of MAC addresses with non-zero VID. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel Acked-by: Arun Ramadoss Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8863_smi: fix bulk access

2023-04-06T10:10:45+00:00

[ Upstream commit 392ff7a84cbca34118ca286dfbfe8aee24605897 ] Current regmap bulk access is broken, resulting to wrong reads/writes if ksz_read64/ksz_write64 functions are used. Mostly this issue was visible by using ksz8_fdb_dump(), which returned corrupt MAC address. The reason is that regmap was configured to have max_raw_read/write, even if ksz8863_mdio_read/write functions are able to handle unlimited read/write accesses. On ksz_read64 function we are using multiple 32bit accesses by incrementing each access by 1 instead of 4. Resulting buffer had 01234567.12345678 instead of 01234567.89abcdef. We have multiple ways to fix it: - enable 4 byte alignment for 32bit accesses. Since the HW do not have this requirement. It will break driver. - disable max_raw_* limit. This patch is removing max_raw_* limit for regmap accesses in ksz8863_smi. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by: Oleksij Rempel Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8: ksz8_fdb_dump: avoid extracting ghost entry from empty dynamic MAC table.

2023-04-06T10:10:45+00:00

[ Upstream commit 492606cdc74804d372ab1bdb8f3ef4a6fb6f9f59 ] If the dynamic MAC table is empty, we will still extract one outdated entry. Fix it by using correct bit offset. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel Acked-by: Arun Ramadoss Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: ksz8: fix offset for the timestamp filed

2023-04-06T10:10:45+00:00

[ Upstream commit b3177aab89be540dc50d2328427b073361093e38 ] We are using wrong offset, so we will get not a timestamp. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel Acked-by: Arun Ramadoss Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin