kernel/linux.git/drivers/net/dsa/b53, branch v6.6.134

net: dsa: b53: skip multicast entries for fdb_dump()

2026-01-11T14:22:07+00:00

[ Upstream commit d42bce414d1c5c0b536758466a1f63ac358e613c ] port_fdb_dump() is supposed to only add fdb entries, but we iterate over the full ARL table, which also includes multicast entries. So check if the entry is a multicast entry before passing it on to the callback(). Additionally, the port of those entries is a bitmask, not a port number, so any included entries would have even be for the wrong port. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: b53: stop reading ARL entries if search is done

2025-11-24T09:29:52+00:00

[ Upstream commit 0be04b5fa62a82a9929ca261f6c9f64a3d0a28da ] The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it finished traversing the ARL table. This means that there will be no valid result, so we should not attempt to read and process any further entries. We only ever check the validity of the entries for 4 ARL bin chips, and only after having passed the first entry to the b53_fdb_copy(). This means that we always pass an invalid entry at the end to the b53_fdb_copy(). b53_fdb_copy() does check the validity though before passing on the entry, so it never gets passed on. On < 4 ARL bin chips, we will even continue reading invalid entries until we reach the result limit. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: fix enabling ip multicast

2025-11-24T09:29:52+00:00

[ Upstream commit c264294624e956a967a9e2e5fa41e3273340b089 ] In the New Control register bit 1 is either reserved, or has a different function: Out of Range Error Discard When enabled, the ingress port discards any frames if the Length field is between 1500 and 1536 (excluding 1500 and 1536) and with good CRC. The actual bit for enabling IP multicast is bit 0, which was only explicitly enabled for BCM5325 so far. For older switch chips, this bit defaults to 0, so we want to enable it as well, while newer switch chips default to 1, and their documentation says "It is illegal to set this bit to zero." So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit also for other switch chips. While at it, rename it to (B53_)IP_MC as that is how it is called in Broadcom code. Fixes: 63cc54a6f073 ("net: dsa: b53: Fix egress flooding settings") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: fix resetting speed and pause on forced link

2025-11-24T09:29:52+00:00

[ Upstream commit b6a8a5477fe9bd6be2b594a88f82f8bba41e6d54 ] There is no guarantee that the port state override registers have their default values, as not all switches support being reset via register or have a reset GPIO. So when forcing port config, we need to make sure to clear all fields, which we currently do not do for the speed and flow control configuration. This can cause flow control stay enabled, or in the case of speed becoming an illegal value, e.g. configured for 1G (0x2), then setting 100M (0x1), results in 0x3 which is invalid. For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on supported chips, as the bit can have different meanings on other chips, e.g. for BCM5389 this controls scanning PHYs for link/speed configuration. Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: fix IP_MULTICAST_CTRL on BCM5325

2025-08-28T14:28:24+00:00

[ Upstream commit 044d5ce2788b165798bfd173548e61bf7b6baf4d ] BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN. Reviewed-by: Florian Fainelli Signed-off-by: Álvaro Fernández Rojas Link: https://patch.msgid.link/20250614080000.1884236-9-noltari@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: prevent SWITCH_CTRL access on BCM5325

2025-08-28T14:28:23+00:00

[ Upstream commit 22ccaaca43440e90a3b68d2183045b42247dc4be ] BCM5325 doesn't implement SWITCH_CTRL register so we should avoid reading or writing it. Reviewed-by: Florian Fainelli Signed-off-by: Álvaro Fernández Rojas Link: https://patch.msgid.link/20250614080000.1884236-8-noltari@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: prevent DIS_LEARNING access on BCM5325

2025-08-28T14:28:23+00:00

[ Upstream commit 800728abd9f83bda4de62a30ce62a8b41c242020 ] BCM5325 doesn't implement DIS_LEARNING register so we should avoid reading or writing it. Reviewed-by: Florian Fainelli Signed-off-by: Álvaro Fernández Rojas Link: https://patch.msgid.link/20250614080000.1884236-10-noltari@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325

2025-08-28T14:28:23+00:00

[ Upstream commit 37883bbc45a8555d6eca88d3a9730504d2dac86c ] BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should avoid reading or writing it. PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325 and we should use PORT_OVERRIDE_LP_FLOW_25 instead. Reviewed-by: Florian Fainelli Signed-off-by: Álvaro Fernández Rojas Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: fix b53_imp_vlan_setup for BCM5325

2025-08-28T14:28:23+00:00

[ Upstream commit c00df1018791185ea398f78af415a2a0aaa0c79c ] CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for B53_PVLAN_PORT_MASK register. Reviewed-by: Florian Fainelli Signed-off-by: Álvaro Fernández Rojas Link: https://patch.msgid.link/20250614080000.1884236-14-noltari@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: allow RGMII for bcm63xx RGMII ports

2025-06-19T13:28:34+00:00

[ Upstream commit 5ea0d42c1980e6d10e5cb56a78021db5bfcebaaf ] Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be actually used in RGMII mode. Without this, phylink will fail to configure them: [ 3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL [ 3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL [ 3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs") Reviewed-by: Florian Fainelli Signed-off-by: Jonas Gorski Link: https://patch.msgid.link/20250602193953.1010487-5-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin