kernel/linux.git/drivers/net/dsa/b53/b53_priv.h, branch v6.2

net: dsa: b53: convert to phylink_pcs

2022-05-01T16:51:06+00:00

Convert B53 to use phylink_pcs for the serdes rather than hooking it into the MAC-layer callbacks. Fixes: 81c1681cbb9f ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: dsa: pass extack to dsa_switch_ops :: port_mirror_add()

2022-03-18T00:42:47+00:00

Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: pass extack to .port_bridge_join driver methods

2022-02-27T11:06:14+00:00

As FDB isolation cannot be enforced between VLAN-aware bridges in lack of hardware assistance like extra FID bits, it seems plausible that many DSA switches cannot do it. Therefore, they need to reject configurations with multiple VLAN-aware bridges from the two code paths that can transition towards that state: - joining a VLAN-aware bridge - toggling VLAN awareness on an existing bridge The .port_vlan_filtering method already propagates the netlink extack to the driver, let's propagate it from .port_bridge_join too, to make sure that the driver can use the same function for both. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: request drivers to perform FDB isolation

2022-02-27T11:06:14+00:00

For DSA, to encourage drivers to perform FDB isolation simply means to track which bridge does each FDB and MDB entry belong to. It then becomes the driver responsibility to use something that makes the FDB entry from one bridge not match the FDB lookup of ports from other bridges. The top-level functions where the bridge is determined are: - dsa_port_fdb_{add,del} - dsa_port_host_fdb_{add,del} - dsa_port_mdb_{add,del} - dsa_port_host_mdb_{add,del} aka the pre-crosschip-notifier functions. Changing the API to pass a reference to a bridge is not superfluous, and looking at the passed bridge argument is not the same as having the driver look at dsa_to_port(ds, port)->bridge from the ->port_fdb_add() method. DSA installs FDB and MDB entries on shared (CPU and DSA) ports as well, and those do not have any dp->bridge information to retrieve, because they are not in any bridge - they are merely the pipes that serve the user ports that are in one or multiple bridges. The struct dsa_bridge associated with each FDB/MDB entry is encapsulated in a larger "struct dsa_db" database. Although only databases associated to bridges are notified for now, this API will be the starting point for implementing IFF_UNICAST_FLT in DSA. There, the idea is to install FDB entries on the CPU port which belong to the corresponding user port's port database. These are supposed to match only when the port is standalone. It is better to introduce the API in its expected final form than to introduce it for bridges first, then to have to change drivers which may have made one or more assumptions. Drivers can use the provided bridge.num, but they can also use a different numbering scheme that is more convenient. DSA must perform refcounting on the CPU and DSA ports by also taking into account the bridge number. So if two bridges request the same local address, DSA must notify the driver twice, once for each bridge. In fact, if the driver supports FDB isolation, DSA must perform refcounting per bridge, but if the driver doesn't, DSA must refcount host addresses across all bridges, otherwise it would be telling the driver to delete an FDB entry for a bridge and the driver would delete it for all bridges. So introduce a bool fdb_isolation in drivers which would make all bridge databases passed to the cross-chip notifier have the same number (0). This makes dsa_mac_addr_find() -> dsa_db_equal() say that all bridge databases are the same database - which is essentially the legacy behavior. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: b53: switch to using phylink_generic_validate()

2022-02-22T11:03:02+00:00

Switch the Broadcom b53 driver to using the phylink_generic_validate() implementation by removing its own .phylink_validate method and associated code. Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: dsa: b53: populate supported_interfaces and mac_capabilities

2022-02-22T11:03:02+00:00

Populate the supported interfaces and MAC capabilities for the Broadcom B53 DSA switches in preparation to using these for the generic validation functionality. The interface modes are derived from: - b53_serdes_phylink_validate() - SRAB mux configuration Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join

2021-12-08T22:31:16+00:00

This is a preparation patch for the removal of the DSA switch methods ->port_bridge_tx_fwd_offload() and ->port_bridge_tx_fwd_unoffload(). The plan is for the switch to report whether it offloads TX forwarding directly as a response to the ->port_bridge_join() method. This change deals with the noisy portion of converting all existing function prototypes to take this new boolean pointer argument. The bool is placed in the cross-chip notifier structure for bridge join, and a reference to it is provided to drivers. In the next change, DSA will then actually look at this value instead of calling ->port_bridge_tx_fwd_offload(). Signed-off-by: Vladimir Oltean Reviewed-by: Alvin Šipraga Signed-off-by: Jakub Kicinski

net: dsa: keep the bridge_dev and bridge_num as part of the same structure

2021-12-08T22:31:16+00:00

The main desire behind this is to provide coherent bridge information to the fast path without locking. For example, right now we set dp->bridge_dev and dp->bridge_num from separate code paths, it is theoretically possible for a packet transmission to read these two port properties consecutively and find a bridge number which does not correspond with the bridge device. Another desire is to start passing more complex bridge information to dsa_switch_ops functions. For example, with FDB isolation, it is expected that drivers will need to be passed the bridge which requested an FDB/MDB entry to be offloaded, and along with that bridge_dev, the associated bridge_num should be passed too, in case the driver might want to implement an isolation scheme based on that number. We already pass the {bridge_dev, bridge_num} pair to the TX forwarding offload switch API, however we'd like to remove that and squash it into the basic bridge join/leave API. So that means we need to pass this pair to the bridge join/leave API. During dsa_port_bridge_leave, first we unset dp->bridge_dev, then we call the driver's .port_bridge_leave with what used to be our dp->bridge_dev, but provided as an argument. When bridge_dev and bridge_num get folded into a single structure, we need to preserve this behavior in dsa_port_bridge_leave: we need a copy of what used to be in dp->bridge. Switch drivers check bridge membership by comparing dp->bridge_dev with the provided bridge_dev, but now, if we provide the struct dsa_bridge as a pointer, they cannot keep comparing dp->bridge to the provided pointer, since this only points to an on-stack copy. To make this obvious and prevent driver writers from forgetting and doing stupid things, in this new API, the struct dsa_bridge is provided as a full structure (not very large, contains an int and a pointer) instead of a pointer. An explicit comparison function needs to be used to determine bridge membership: dsa_port_offloads_bridge(). Signed-off-by: Vladimir Oltean Reviewed-by: Alvin Šipraga Signed-off-by: Jakub Kicinski

net: dsa: b53: serialize access to the ARL table

2021-10-25T11:59:41+00:00

The b53 driver performs non-atomic transactions to the ARL table when adding, deleting and reading FDB and MDB entries. Traditionally these were all serialized by the rtnl_lock(), but now it is possible that DSA calls ->port_fdb_add and ->port_fdb_del without holding that lock. So the driver must have its own serialization logic. Add a mutex and hold it from all entry points (->port_fdb_{add,del,dump}, ->port_mdb_{add,del}). Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Revert "Merge branch 'dsa-rtnl'"

2021-10-25T11:59:25+00:00

This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.