kernel/linux.git/drivers/net/dsa/Kconfig, branch v5.10.261

net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

2022-02-08T17:30:41+00:00

commit 4223f86512877b04c932e7203648b37eec931731 upstream. Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dsa: mt7530: Add the support of MT7531 switch

2020-09-14T23:30:39+00:00

Add new support for MT7531: MT7531 is the next generation of MT7530. It is also a 7-ports switch with 5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu port 6 only supports SGMII interface. Cpu port 5 supports either RGMII or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like mt7530. Due to SGMII interface support, pll, and pad setting are different from MT7530. This patch adds different initial setting, and SGMII phylink handlers of MT7531. MT7531 SGMII interface can be configured in following mode: - 'SGMII AN mode' with in-band negotiation capability which is compatible with PHY_INTERFACE_MODE_SGMII. - 'SGMII force mode' without in-band negotiation which is compatible with 10B/8B encoding of PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause. - 2.5 times faster clocked 'SGMII force mode' without in-band negotiation which is compatible with 10B/8B encoding of PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause. Signed-off-by: Landen Chao Signed-off-by: Sean Wang Signed-off-by: David S. Miller

net: dsa: mt7530: Refine message in Kconfig

2020-09-14T23:30:38+00:00

Refine message in Kconfig with fixing typo and an explicit MT7621 support. Signed-off-by: Landen Chao Signed-off-by: Sean Wang Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: rtl8366rb: Support the CPU DSA tag

2020-07-08T22:36:19+00:00

This activates the support to use the CPU tag to properly direct ingress traffic to the right port. Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to 1 to disable the insertion of the CPU tag which is what the code currently does. The bit 15 define calls this setting RTL8368RB_CPU_INSTAG which is confusing since the inverse meaning is implied: programmers may think that setting this bit to 1 will *enable* inserting the tag rather than disabling it, so rename this setting in bit 15 to RTL8368RB_CPU_NO_TAG which is more to the point. After this e.g. ping works out-of-the-box with the RTL8366RB. Cc: DENG Qingfang Cc: Mauri Sandberg Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij Signed-off-by: David S. Miller

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

net: dsa: vsc73xx: Remove dependency on CONFIG_OF

2020-01-05T22:23:48+00:00

There is no build time dependency on CONFIG_OF, but we do need to make sure we gate the initialization of the gpio_chip::of_node member with a proper check on CONFIG_OF_GPIO. This enables the driver to build on platforms that do not have CONFIG_OF enabled. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: add support for Atheros AR9331 built-in switch

2019-12-21T01:05:47+00:00

Provide basic support for Atheros AR9331 built-in switch. So far it works as port multiplexer without any hardware offloading support. Reviewed-by: Andrew Lunn Reviewed-by: Vivien Didelot Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

net: dsa: ocelot: add driver for Felix switch family

2019-11-15T20:32:16+00:00

This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: dsa: LAN9303: select REGMAP when LAN9303 enable

2019-10-29T23:17:02+00:00

When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y, below errors can be seen: drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE undeclared here (not in a function) .reg_format_endian = REGMAP_ENDIAN_LITTLE, drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config has no member named reg_read .reg_read = lan9303_mdio_read, It should select REGMAP in config NET_DSA_SMSC_LAN9303. Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Mao Wenan Signed-off-by: David S. Miller

net: dsa: vsc73xx: fix NET_DSA and OF dependencies

2019-07-09T20:19:53+00:00

The restructuring of the driver got the dependencies wrong: without CONFIG_NET_DSA we get this build failure: WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n] Selected by [m]: - NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y] ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! Add the appropriate dependencies. Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller