kernel/linux.git/drivers/net/can, branch v7.2-rc5

can: peak: Modification of references to email accounts being deleted

2026-07-16T07:12:24+00:00

Following the sale of PEAK-System France by HMS-Networks, this update is intended to change all my @hms-networks.com email addresses to my new @peak-system.fr address. Signed-off-by: Stéphane Grosjean Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr Signed-off-by: Marc Kleine-Budde

can: esd_usb: kill anchored URBs before freeing netdevs

2026-07-14T08:59:53+00:00

esd_usb_disconnect() frees each CAN netdev with free_candev() inside its per-netdev loop and only calls unlink_all_urbs(dev) afterwards. The per-netdev private data (struct esd_usb_net_priv) is embedded in the net_device allocation returned by alloc_candev(), so once free_candev() has run, dev->nets[i] points to freed memory. unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)), clear active_tx_jobs, and reset priv->tx_contexts[]. Reorder the teardown so the anchored URBs are killed before the netdevs are freed, matching other CAN/USB drivers in the same directory such as ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then free: unregister the netdevs first (which stops their TX queues), call unlink_all_urbs(dev) once, then free the netdevs. This issue was found by an in-house static analysis tool. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.5 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260709164159.497640-1-fanwu01@zju.edu.cn Signed-off-by: Marc Kleine-Budde

can: vxcan: Kconfig: fix description stating no local echo provided

2026-07-14T08:52:44+00:00

The Kconfig description of the vxcan kernel module erroneously states the the vxcan interface does not provide a local echo of sent can frames. However this behavior changed in commit 259bdba27e32 ("vxcan: enable local echo for sent CAN frames") and vxcan interfaces now provide a local echo. Change the description of the vxcan module in the Kconfig to reflect this change. Signed-off-by: Alexander Hölzl Acked-by: Oliver Hartkopp Link: https://patch.msgid.link/20260619090035.17769-1-alexander.hoelzl@gmx.net [mkl: rephrase patch description] Signed-off-by: Marc Kleine-Budde

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2026-06-17T18:49:00+00:00

Pull virtio updates from Michael Tsirkin: - new virtio CAN driver - support for LoongArch architecture in fw_cfg - support for firmware notifications in vdpa/octeon_ep - support for VFs in virtio core - fixes, cleanups all over the place, notably: - vhost: fix vhost_get_avail_idx for a non empty ring fixing an significant old perf regression - READ_ONCE() annotations mean virtio ring is now free of KCSAN warnings * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (37 commits) can: virtio: Fix comment in UAPI header can: virtio: Add virtio CAN driver virtio: add num_vf callback to virtio_bus fw_cfg: Add support for LoongArch architecture vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler vdpa/octeon_ep: Add vDPA device event handling for firmware notifications vdpa/octeon_ep: Use 4 bytes for mailbox signature vdpa/octeon_ep: Fix PF->VF mailbox data address calculation vhost_task_create: kill unnecessary .exit_signal initialization vhost: remove unnecessary module_init/exit functions vdpa/mlx5: Use kvzalloc_flex() for MTT command memory vdpa_sim_net: switch to dynamic root device vdpa_sim_blk: switch to dynamic root device virtio-mem: Destroy mutex before freeing virtio_mem virtio-balloon: Destroy mutex before freeing virtio_balloon tools/virtio: fix build for kmalloc_obj API and missing stubs virtio_ring: Add READ_ONCE annotations for device-writable fields vduse: fix compat handling for VDUSE_IOTLB_GET_FD/VDUSE_VQ_GET_INFO tools/virtio: check mmap return value in vringh_test vhost/net: complete zerocopy ubufs only once ...

can: virtio: Add virtio CAN driver

2026-06-10T06:17:00+00:00

Add virtio CAN driver based on Virtio 1.4 specification (see https://github.com/oasis-tcs/virtio-spec/tree/virtio-1.4). The driver implements a complete CAN bus interface over Virtio transport, supporting both CAN Classic and CAN-FD Ids. In term of frames, it supports classic and CAN FD. RTR frames are only supported with classic CAN. Usage: - "ip link set up can0" - start controller - "ip link set down can0" - stop controller - "candump can0" - receive frames - "cansend can0 123#DEADBEEF" - send frames Signed-off-by: Harald Mommer Co-developed-by: Harald Mommer Signed-off-by: Mikhail Golubev-Ciuchea Co-developed-by: Marc Kleine-Budde Signed-off-by: Marc Kleine-Budde Cc: Damir Shaikhutdinov Reviewed-by: Francesco Valla Tested-by: Francesco Valla Signed-off-by: Matias Ezequiel Vara Larsen Signed-off-by: Michael S. Tsirkin Message-ID:

net: Consistently define pci_device_ids using named initializers

2026-05-13T01:16:34+00:00

... and PCI device helpers. The various struct pci_device_id arrays were initialized mostly by one the PCI_DEVICE macros and then list expressions. The latter isn't easily readable if you're not into PCI. Using named initializers is more explicit and thus easier to parse. Also use PCI_DEVICE* helper macros to assign .vendor, .device, .subvendor and .subdevice where appropriate and skip explicit assignments of 0 (which the compiler takes care of). The secret plan is to make struct pci_device_id::driver_data an anonymous union (similar to https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/) and that requires named initializers. But it's also a nice cleanup on its own. This change doesn't introduce changes to the compiled pci_device_id arrays. Tested on x86 and arm64. Reviewed-by: Jijie Shao Acked-by: Arend van Spriel Reviewed-by: Aleksandr Loktionov Reviewed-by: Petr Machata # for mlxsw Acked-by: Jacob Keller Acked-by: Johannes Berg Signed-off-by: Uwe Kleine-König (The Capable Hub) Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2) Reviewed-by: Michael Grzeschik Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-04-14T19:04:00+00:00

Merge in late fixes in preparation for the net-next PR. Conflicts: include/net/sch_generic.h a6bd339dbb351 ("net_sched: fix skb memory leak in deferred qdisc drops") ff2998f29f390 ("net: sched: introduce qdisc-specific drop reason tracing") https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk drivers/net/ethernet/airoha/airoha_eth.c 1acdfbdb516b ("net: airoha: Fix VIP configuration for AN7583 SoC") bf3471e6e6c0 ("net: airoha: Make flow control source port mapping dependent on nbq parameter") Adjacent changes: drivers/net/ethernet/airoha/airoha_ppe.c f44218cd5e6a ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()") 7da62262ec96 ("inet: add ip_local_port_step_width sysctl to improve port usage distribution") Signed-off-by: Jakub Kicinski

can: ucan: fix devres lifetime

2026-04-09T16:20:34+00:00

USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the control message buffer lifetime so that it is released on driver unbind. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable@vger.kernel.org # 4.19 Cc: Jakob Unterwurzacher Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org Signed-off-by: Marc Kleine-Budde

can: ucan: refactor endpoint lookup

2026-04-01T07:27:58+00:00

Use the common USB helpers for looking up bulk and interrupt endpoints (and determining endpoint numbers and max packet sizes) instead of open coding. Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260330101817.1664787-3-johan@kernel.org Signed-off-by: Marc Kleine-Budde