kernel/linux.git/drivers/net/can, branch v6.1.87

can: netlink: Fix TDCO calculation using the old data bittiming

2024-02-23T08:12:47+00:00

commit 2aa0a5e65eae27dbd96faca92c84ecbf6f492d42 upstream. The TDCO calculation was done using the currently applied data bittiming, instead of the newly computed data bittiming, which means that the TDCO had an invalid value unless setting the same data bittiming twice. Fixes: d99755f71a80 ("can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)") Signed-off-by: Maxime Jayat Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/all/40579c18-63c0-43a4-8d4c-f3a6c1c0b417@munic.io Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds

2023-11-20T10:51:53+00:00

[ Upstream commit 6411959c10fe917288cbb1038886999148560057 ] If the "struct can_priv::echoo_skb" is accessed out of bounds, this would cause a kernel crash. Instead, issue a meaningful warning message and return with an error. Fixes: a6e4bc530403 ("can: make the number of echo skb's configurable") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-5-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()

2023-11-20T10:51:53+00:00

[ Upstream commit 6841cab8c4504835e4011689cbdb3351dec693fd ] This race condition was discovered while updating the at91_can driver to use can_bus_off(). The following scenario describes how the converted at91_can driver would behave. When a CAN device goes into BUS-OFF state, the driver usually stops/resets the CAN device and calls can_bus_off(). This function sets the netif carrier to off, and (if configured by user space) schedules a delayed work that calls can_restart() to restart the CAN device. The can_restart() function first checks if the carrier is off and triggers an error message if the carrier is OK. Then it calls the driver's do_set_mode() function to restart the device, then it sets the netif carrier to on. There is a race window between these two calls. The at91 CAN controller (observed on the sama5d3, a single core 32 bit ARM CPU) has a hardware limitation. If the device goes into bus-off while sending a CAN frame, there is no way to abort the sending of this frame. After the controller is enabled again, another attempt is made to send it. If the bus is still faulty, the device immediately goes back to the bus-off state. The driver calls can_bus_off(), the netif carrier is switched off and another can_restart is scheduled. This occurs within the race window before the original can_restart() handler marks the netif carrier as OK. This would cause the 2nd can_restart() to be called with an OK netif carrier, resulting in an error message. The flow of the 1st can_restart() looks like this: can_restart() // bail out if netif_carrier is OK netif_carrier_ok(dev) priv->do_set_mode(dev, CAN_MODE_START) // enable CAN controller // sama5d3 restarts sending old message // CAN devices goes into BUS_OFF, triggers IRQ // IRQ handler start at91_irq() at91_irq_err_line() can_bus_off() netif_carrier_off() schedule_delayed_work() // IRQ handler end netif_carrier_on() The 2nd can_restart() will be called with an OK netif carrier and the error message will be printed. To close the race window, first set the netif carrier to on, then restart the controller. In case the restart fails with an error code, roll back the netif carrier to off. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-2-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: dev: can_restart(): don't crash kernel if carrier is OK

2023-11-20T10:51:53+00:00

[ Upstream commit fe5c9940dfd8ba0c73672dddb30acd1b7a11d4c7 ] During testing, I triggered a can_restart() with the netif carrier being OK [1]. The BUG_ON, which checks if the carrier is OK, results in a fatal kernel crash. This is neither helpful for debugging nor for a production system. [1] The root cause is a race condition in can_restart() which will be fixed in the next patch. Do not crash the kernel, issue an error message instead, and continue restarting the CAN device anyway. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-1-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set

2023-10-19T21:08:52+00:00

[ Upstream commit 1f223208ebdef84f21c15e9958c005a93c871aa2 ] When adding the RISCV option I didn't gate it behind ARCH_SUNXI. As a result this option shows up with Allwinner support isn't enabled. Fix that by requiring ARCH_SUNXI to be set if RISCV is set. Fixes: 8abb95250ae6 ("can: sun4i_can: Add support for the Allwinner D1") Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/linux-sunxi/CAMuHMdV2m54UAH0X2dG7stEg=grFihrdsz4+o7=_DpBMhjTbkw@mail.gmail.com/ Signed-off-by: John Watts Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/all/20230905231342.2042759-2-contact@jookia.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: sun4i_can: Add support for the Allwinner D1

2023-09-23T09:11:02+00:00

[ Upstream commit 8abb95250ae6af2d51993da8fcae18da2ce24cc4 ] The controllers present in the D1 are extremely similar to the R40 and require the same reset quirks, but An extra quirk is needed to support receiving packets. Signed-off-by: John Watts Link: https://lore.kernel.org/all/20230721221552.1973203-6-contact@jookia.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: sun4i_can: Add acceptance register quirk

2023-09-23T09:11:01+00:00

[ Upstream commit 8cda0c6dfd42ee6f2586e7dffb553aaf1fcb62ca ] The Allwinner D1's CAN controllers have the ACPC and ACPM registers moved down. Compensate for this by adding an offset quirk for the acceptance registers. Signed-off-by: John Watts Link: https://lore.kernel.org/all/20230721221552.1973203-5-contact@jookia.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

2023-09-13T07:42:31+00:00

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ] In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented. Fix this by first incrementing the error counters and then allocate the skb. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

net: validate veth and vxcan peer ifindexes

2023-08-30T14:11:02+00:00

[ Upstream commit f534f6581ec084fe94d6759f7672bd009794b07e ] veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

2023-08-03T08:24:09+00:00

commit f8a2da6ec2417cca169fa85a8ab15817bccbb109 upstream. After an initial link up the CAN device is in ERROR-ACTIVE mode. Due to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to STOPPED after a link down: | ip link set dev can0 up | ip link set dev can0 down | ip --details link show can0 | 13: can0: mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can state ERROR-ACTIVE restart-ms 1000 Add missing assignment of CAN_STATE_STOPPED in gs_can_close(). Cc: stable@vger.kernel.org Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-fix-can-state-v1-1-f19738ae2c23@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman