kernel/linux.git/drivers/net/can, branch v5.4.151

can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters

2021-09-03T08:08:13+00:00

commit 044012b52029204900af9e4230263418427f4ba4 upstream. This patch fixes the interchanged fetch of the CAN RX and TX error counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter is really in struct rx_msg::data[2] and the TX error counter is in struct rx_msg::data[3]. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Stefan Mätje Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: hi311x: fix a signedness bug in hi3110_cmd()

2021-08-04T10:27:40+00:00

[ Upstream commit f6b3c7848e66e9046c8a79a5b88fd03461cc252b ] The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kili Signed-off-by: Dan Carpenter Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: esd_usb2: fix memory leak

2021-08-04T10:27:38+00:00

commit 928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream. In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: ems_usb: fix memory leak

2021-08-04T10:27:38+00:00

commit 9969e3c5f40c166e3396acc36c34f9de502929f6 upstream. In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb_8dev: fix memory leak

2021-08-04T10:27:38+00:00

commit 0e865f0c31928d6a313269ef624907eec55287c4 upstream. In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcba_usb_start(): add missing urb->transfer_dma initialization

2021-08-04T10:27:38+00:00

commit fc43fb69a7af92839551f99c1a96a37b77b3ae7a upstream. Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable Reported-by: Yasushi SHOJI Signed-off-by: Pavel Skripkin Tested-by: Yasushi SHOJI [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: peak_pciefd: pucan_handle_status(): fix a potential starvation issue in TX path

2021-07-14T14:53:04+00:00

commit b17233d385d0b6b43ecf81d43008cb1bbb008166 upstream. Rather than just indicating that transmission can start, this patch requires the explicit flushing of the network TX queue when the driver is informed by the device that it can transmit, next to its configuration. In this way, if frames have already been written by the application, they will actually be transmitted. Fixes: ffd137f7043c ("can: peak/pcie_fd: remove useless code when interface starts") Link: https://lore.kernel.org/r/20210623142600.149904-1-s.grosjean@peak-system.com Cc: linux-stable Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

net: can: ems_usb: fix use-after-free in ems_usb_disconnect()

2021-07-14T14:53:00+00:00

commit ab4a0b8fcb9a95c02909b62049811bd2e586aaa4 upstream. In ems_usb_disconnect() dev pointer, which is netdev private data, is used after free_candev() call: | if (dev) { | unregister_netdev(dev->netdev); | free_candev(dev->netdev); | | unlink_all_urbs(dev); | | usb_free_urb(dev->intr_urb); | | kfree(dev->intr_in_buffer); | kfree(dev->tx_msg_buffer); | } Fix it by simply moving free_candev() at the end of the block. Fail log: | BUG: KASAN: use-after-free in ems_usb_disconnect | Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895 | | CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4 | Workqueue: usb_hub_wq hub_event | Call Trace: | dump_stack (lib/dump_stack.c:122) | print_address_description.constprop.0.cold (mm/kasan/report.c:234) | kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436) | ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058) Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/20210617185130.5834-1-paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcba_usb: fix memory leak in mcba_usb

2021-06-23T12:41:28+00:00

commit 91c02557174be7f72e46ed7311e3bea1939840b0 upstream. Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com Cc: linux-stable Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: m_can: m_can_tx_work_queue(): fix tx_skb race condition

2021-05-19T08:08:28+00:00

[ Upstream commit e04b2cfe61072c7966e1a5fb73dd1feb30c206ed ] The m_can_start_xmit() function checks if the cdev->tx_skb is NULL and returns with NETDEV_TX_BUSY in case tx_sbk is not NULL. There is a race condition in the m_can_tx_work_queue(), where first the skb is send to the driver and then the case tx_sbk is set to NULL. A TX complete IRQ might come in between and wake the queue, which results in tx_skb not being cleared yet. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Tested-by: Torin Cooper-Bennun Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin