kernel/linux.git/drivers/net/can, branch v5.10.78

can: peak_pci: peak_pci_remove(): fix UAF

2021-10-27T07:56:50+00:00

commit 949fe9b35570361bc6ee2652f89a0561b26eec98 upstream. When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification

2021-10-27T07:56:50+00:00

commit 3d031abc7e7249573148871180c28ecedb5e27df upstream. This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: rcar_can: fix suspend/resume

2021-10-27T07:56:50+00:00

commit f7c05c3987dcfde9a4e8c2d533db013fabebca0d upstream. If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda Tested-by: Ayumi Nakamichi Reviewed-by: Ulrich Hecht Tested-by: Biju Das Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters

2021-09-03T08:09:22+00:00

commit 044012b52029204900af9e4230263418427f4ba4 upstream. This patch fixes the interchanged fetch of the CAN RX and TX error counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter is really in struct rx_msg::data[2] and the TX error counter is in struct rx_msg::data[3]. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Stefan Mätje Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: hi311x: fix a signedness bug in hi3110_cmd()

2021-08-04T10:46:44+00:00

[ Upstream commit f6b3c7848e66e9046c8a79a5b88fd03461cc252b ] The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kili Signed-off-by: Dan Carpenter Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: esd_usb2: fix memory leak

2021-08-04T10:46:40+00:00

commit 928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream. In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: ems_usb: fix memory leak

2021-08-04T10:46:40+00:00

commit 9969e3c5f40c166e3396acc36c34f9de502929f6 upstream. In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb_8dev: fix memory leak

2021-08-04T10:46:40+00:00

commit 0e865f0c31928d6a313269ef624907eec55287c4 upstream. In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable Signed-off-by: Pavel Skripkin Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcba_usb_start(): add missing urb->transfer_dma initialization

2021-08-04T10:46:40+00:00

commit fc43fb69a7af92839551f99c1a96a37b77b3ae7a upstream. Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable Reported-by: Yasushi SHOJI Signed-off-by: Pavel Skripkin Tested-by: Yasushi SHOJI [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: peak_usb: pcan_usb_handle_bus_evt(): fix reading rxerr/txerr values

2021-08-04T10:46:40+00:00

commit 590eb2b7d8cfafb27e8108d52d4bf4850626d31d upstream. This patch fixes an incorrect way of reading error counters in messages received for this purpose from the PCAN-USB interface. These messages inform about the increase or decrease of the error counters, whose values are placed in bytes 1 and 2 of the message data (not 0 and 1). Fixes: ea8b33bde76c ("can: pcan_usb: add support of rxerr/txerr counters") Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com Cc: linux-stable Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman