kernel/linux.git/drivers/net/can, branch v4.4.235

can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices

2020-06-20T08:23:19+00:00

commit da2311a6385c3b499da2ed5d9be59ce331fa93e9 upstream. Uninitialized Kernel memory can leak to USB devices. Fix this by using kzalloc() instead of kmalloc(). Signed-off-by: Xiaolong Huang Fixes: 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Cc: linux-stable # >= v4.19 Signed-off-by: Marc Kleine-Budde [bwh: Backported to 4.9: adjust filename, context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

slcan: Fix double-free on slcan_open() error path

2020-06-11T07:21:38+00:00

Commit 9ebd796e2400 ("can: slcan: Fix use-after-free Read in slcan_open") was incorrectly backported to 4.4 and 4.9 stable branches. Since they do not have commit cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state."), the destructor function slc_free_netdev() is already responsible for calling free_netdev() and slcan_open() must not call both of them. yangerkun previously fixed the same bug in slip. Fixes: ce624b2089ea ("can: slcan: Fix use-after-free Read in slcan_open") # 4.4 Fixes: f59604a80fa4 ("slcan: not call free_netdev before rtnl_unlock ...") # 4.4 Fixes: 56635a1e6ffb ("can: slcan: Fix use-after-free Read in slcan_open") # 4.9 Fixes: a1c9b23142ac ("slcan: not call free_netdev before rtnl_unlock ...") # 4.9 Cc: yangerkun Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

slcan: Don't transmit uninitialized stack data in padding

2020-04-13T08:31:31+00:00

[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ] struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL). This commit just zeroes the whole struct including the padding. Signed-off-by: Richard Palethorpe Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by: Kees Cook Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: security@kernel.org Cc: wg@grandegger.com Cc: mkl@pengutronix.de Cc: davem@davemloft.net Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

slcan: not call free_netdev before rtnl_unlock in slcan_open

2020-04-02T17:02:33+00:00

[ Upstream commit 2091a3d42b4f339eaeed11228e0cbe9d4f92f558 ] As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. This patch is a 1:1 copy of upstream slip.c commit f596c87005f7 ("slip: not call free_netdev before rtnl_unlock in slip_open"). Reported-by: yangerkun Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

can, slip: Protect tty->disc_data in write_wakeup and close with RCU

2020-01-29T09:21:51+00:00

[ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a@syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Cc: "David S. Miller" Cc: Tyler Hall Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode

2020-01-14T19:03:03+00:00

commit 2d77bd61a2927be8f4e00d9478fe6996c47e8d45 upstream. Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: gs_usb_probe(): use descriptors of current altsetting

2020-01-14T19:03:03+00:00

commit 2f361cd9474ab2c4ab9ac8db20faf81e66c6279b upstream. Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: slcan: Fix use-after-free Read in slcan_open

2019-12-21T09:34:53+00:00

commit 9ebd796e24008f33f06ebea5a5e6aceb68b51794 upstream. Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Cc: David Miller Cc: Oliver Hartkopp Cc: Lukas Bulwahn Signed-off-by: Jouni Hogander Cc: linux-stable # >= v5.4 Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: c_can: D_CAN: c_can_chip_config(): perform a sofware reset on open

2019-12-05T14:26:37+00:00

[ Upstream commit 23c5a9488f076bab336177cd1d1a366bd8ddf087 ] When the CAN interface is closed it the hardwre is put in power down mode, but does not reset the error counters / state. Reset the D_CAN on open, so the reported state and the actual state match. According to [1], the C_CAN module doesn't have the software reset. [1] http://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdf Signed-off-by: Jeroen Hofstee Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: peak_usb: report bus recovery as well

2019-12-05T14:26:36+00:00

[ Upstream commit 128a1b87d3ceb2ba449d5aadb222fe22395adeb0 ] While the state changes are reported when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add those as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by: Jeroen Hofstee Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin