kernel/linux.git/drivers/net/can, branch v4.14.263

can: xilinx_can: xcan_probe(): check for error irq

2022-01-27T08:00:51+00:00

[ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ] For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: softing: softing_startstop(): fix set but not used variable warning

2022-01-27T08:00:51+00:00

[ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ] In the function softing_startstop() the variable error_reporting is assigned but not used. The code that uses this variable is commented out. Its stated that the functionality is not finally verified. To fix the warning: | drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable] remove the comment, activate the code, but add a "0 &&" to the if expression and rely on the optimizer rather than the preprocessor to remove the code. Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Cc: Kurt Van Dijck Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: softing_cs: softingcs_probe(): fix memleak on registration failure

2022-01-27T08:00:48+00:00

commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream. In case device registration fails during probe, the driver state and the embedded platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card") Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org Cc: stable@vger.kernel.org # 2.6.38 Signed-off-by: Johan Hovold Reviewed-by: Greg Kroah-Hartman Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}

2022-01-27T08:00:46+00:00

commit 89d58aebe14a365c25ba6645414afdbf4e41cea4 upstream. No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman [mkl: initialize the reserved member, too] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data

2022-01-27T08:00:46+00:00

commit 4a8737ff068724f509d583fef404d349adba80d6 upstream. The received data contains the channel the received data is associated with. If the channel number is bigger than the actual number of channels assume broken or malicious USB device and shut it down. This fixes the error found by clang: | drivers/net/can/usb/gs_usb.c:386:6: error: variable 'dev' is used | uninitialized whenever 'if' condition is true | if (hf->channel >= GS_MAX_INTF) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | drivers/net/can/usb/gs_usb.c:474:10: note: uninitialized use occurs here | hf, dev->gs_hf_size, gs_usb_receive_bulk_callback, | ^~~ Link: https://lore.kernel.org/all/20211210091158.408326-1-mkl@pengutronix.de Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: kvaser_usb: get CAN clock frequency from device

2021-12-29T11:17:32+00:00

commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream. The CAN clock frequency is used when calculating the CAN bittiming parameters. When wrong clock frequency is used, the device may end up with wrong bittiming parameters, depending on user requested bittiming parameters. To avoid this, get the CAN clock frequency from the device. Various existing Kvaser Leaf products use different CAN clocks. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: m_can: Disable and ignore ELO interrupt

2021-12-14T09:16:54+00:00

commit f58ac1adc76b5beda43c64ef359056077df4d93a upstream. With the design of this driver, this condition is often triggered. However, the counter that this interrupt indicates an overflow is never read either, so overflowing is harmless. On my system, when a CAN bus starts flapping up and down, this locks up the whole system with lots of interrupts and printks. Specifically, this interrupt indicates the CEL field of ECR has overflowed. All reads of ECR mask out CEL. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: pch_can: pch_can_rx_normal: fix use after free

2021-12-14T09:16:54+00:00

commit 94cddf1e9227a171b27292509d59691819c458db upstream. After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: sja1000: fix use after free in ems_pcmcia_add_card()

2021-12-14T09:16:53+00:00

commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream. If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Acked-by: Oliver Hartkopp Tested-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: peak_pci: peak_pci_remove(): fix UAF

2021-10-27T07:51:40+00:00

commit 949fe9b35570361bc6ee2652f89a0561b26eec98 upstream. When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman