kernel/linux.git/drivers/net/can, branch v4.14.217

can: softing: softing_netdev_open(): fix error handling

2020-12-29T12:46:47+00:00

[ Upstream commit 4d1be581ec6b92a338bb7ed23e1381f45ddf336f ] If softing_netdev_open() fails, we should call close_candev() to avoid reference leak. Fixes: 03fd3cf5a179d ("can: add driver for Softing card") Signed-off-by: Zhang Qilong Acked-by: Kurt Van Dijck Link: https://lore.kernel.org/r/20201202151632.1343786-1-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde Link: https://lore.kernel.org/r/20201204133508.742120-2-mkl@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

can: m_can: fix nominal bitiming tseg2 min for version >= 3.1

2020-12-02T07:34:44+00:00

[ Upstream commit e3409e4192535fbcc86a84b7a65d9351f46039ec ] At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid register values for "Nominal Time segment after sample point (NTSEG2)" are from 1 to 127. As the hardware uses a value of one more than the programmed value, mean tseg2_min is 2. This patch fixes the tseg2_min value accordingly. Cc: Dan Murphy Cc: Mario Huettel Acked-by: Sriram Dash Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization") Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: fix endianess problem with candleLight firmware

2020-12-02T07:34:44+00:00

[ Upstream commit 4ba1cb39fce4464151517a37ce0ac0a1a3f580d6 ] The firmware on the original USB2CAN by Geschwister Schneider Technologie Entwicklungs- und Vertriebs UG exchanges all data between the host and the device in host byte order. This is done with the struct gs_host_config::byte_order member, which is sent first to indicate the desired byte order. The widely used open source firmware candleLight doesn't support this feature and exchanges the data in little endian byte order. This breaks if a device with candleLight firmware is used on big endianess systems. To fix this problem, all u32 (but not the struct gs_host_frame::echo_id, which is a transparent cookie) are converted to __le32. Cc: Maximilian Schneider Cc: Hubert Denkmair Reported-by: Michael Rausch Link: https://lore.kernel.org/r/b58aace7-61f3-6df7-c6df-69fee2c66906@netadair.de Tested-by: Oleksij Rempel Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/r/20201120103818.3386964-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: m_can: m_can_handle_state_change(): fix state change

2020-11-24T12:05:48+00:00

[ Upstream commit cd0d83eab2e0c26fe87a10debfedbb23901853c1 ] m_can_handle_state_change() is called with the new_state as an argument. In the switch statements for CAN_STATE_ERROR_ACTIVE, the comment and the following code indicate that a CAN_STATE_ERROR_WARNING is handled. This patch fixes this problem by changing the case to CAN_STATE_ERROR_WARNING. Signed-off-by: Wu Bo Link: http://lore.kernel.org/r/20200129022330.21248-2-wubo.oduw@gmail.com Cc: Dan Murphy Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: peak_usb: fix potential integer overflow on shift of a int

2020-11-24T12:05:48+00:00

[ Upstream commit 8a68cc0d690c9e5730d676b764c6f059343b842c ] The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then assigned to a signed 64 bit variable. In the case where time_ref->adapter->ts_used_bits is 32 or more this can lead to an oveflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20201105112427.40688-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb()

2020-11-24T12:05:48+00:00

[ Upstream commit 81c9c8e0adef3285336b942f93287c554c89e6c6 ] The driver has to first fill the skb with data and then handle it to can_put_echo_skb(). This patch moves the can_put_echo_skb() down, right before sending the skb out via USB. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: Remigiusz Kołłątaj Link: https://lore.kernel.org/r/20201111221204.1639007-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: ti_hecc: Fix memleak in ti_hecc_probe

2020-11-24T12:05:47+00:00

[ Upstream commit 7968c7c79d3be8987feb8021f0c46e6866831408 ] In the error handling, we should goto the probe_exit_candev to free ndev to prevent memory leak. Fixes: dabf54dd1c63 ("can: ti_hecc: Convert TI HECC driver to DT only driver") Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20201114111708.3465543-1-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: dev: can_restart(): post buffer from the right context

2020-11-24T12:05:47+00:00

[ Upstream commit a1e654070a60d5d4f7cce59c38f4ca790bb79121 ] netif_rx() is meant to be called from interrupt contexts. can_restart() may be called by can_restart_work(), which is called from a worqueue, so it may run in process context. Use netif_rx_ni() instead. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Co-developed-by: Loris Fauster Signed-off-by: Loris Fauster Signed-off-by: Alejandro Concepcion Rodriguez Link: https://lore.kernel.org/r/4e84162b-fb31-3a73-fa9a-9438b4bd5234@acoro.eu [mkl: use netif_rx_ni() instead of netif_rx_any_context()] Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on

2020-11-18T17:27:54+00:00

[ Upstream commit 93ef65e5a6357cc7381f85fcec9283fe29970045 ] Echo management is driven by PUCAN_MSG_LOOPED_BACK bit, while loopback frames are identified with PUCAN_MSG_SELF_RECEIVE bit. Those bits are set for each outgoing frame written to the IP core so that a copy of each one will be placed into the rx path. Thus, - when PUCAN_MSG_LOOPED_BACK is set then the rx frame is an echo of a previously sent frame, - when PUCAN_MSG_LOOPED_BACK+PUCAN_MSG_SELF_RECEIVE are set, then the rx frame is an echo AND a loopback frame. Therefore, this frame must be put into the socket rx path too. This patch fixes how CAN frames are handled when these are sent while the can interface is configured in "loopback on" mode. Signed-off-by: Stephane Grosjean Link: https://lore.kernel.org/r/20201013153947.28012-1-s.grosjean@peak-system.com Fixes: 8ac8321e4a79 ("can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards") Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping

2020-11-18T17:27:54+00:00

[ Upstream commit ecc7b4187dd388549544195fb13a11b4ea8e6a84 ] Fabian Inostroza has discovered a potential problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface (only), related to the fact that a timestamp of an event may precede the timestamp used for synchronization when both records are part of the same USB packet. However, this case was used to detect the wrapping of the time counter. This patch details and fixes the two identified cases where this problem can occur. Reported-by: Fabian Inostroza Signed-off-by: Stephane Grosjean Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin