kernel/linux.git/drivers/net/can, branch v3.4.105

can: at91_can: add missing prepare and unprepare of the clock

2014-12-01T10:02:36+00:00

commit e77980e50bc2850599d4d9c0192b67a9ffd6daac upstream. In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing error handling. Signed-off-by: David Dueck Signed-off-by: Anthony Harivel Acked-by: Boris Brezillon Signed-off-by: Marc Kleine-Budde Signed-off-by: Zefan Li

can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-complete

2014-12-01T10:02:36+00:00

commit de5944883ebbedbf5adc8497659772f5da7b7d72 upstream. After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid side effects when the RX-FIFO is full, this patch puts the TX mailbox into TX_INACTIVE mode in the transmission complete interrupt handler. This, of course, leaves a race window between the actual completion of the transmission and the handling of tx-complete interrupt. However this is the best we can do without busy polling the tx complete interrupt. Signed-off-by: Marc Kleine-Budde [lizf: Backported to 3.4: adjust context] Signed-off-by: Zefan Li

can: flexcan: implement workaround for errata ERR005829

2014-12-01T10:02:36+00:00

commit 25e924450fcb23c11c07c95ea8964dd9f174652e upstream. This patch implements the workaround mentioned in ERR005829: ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to be transmitted in a specific moment during the arbitration process. Workaround: The workaround consists of two extra steps after setting up a message for transmission: Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000). If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the first valid mailbox can be found using the "RX FIFO filters" table in the FlexCAN chapter of the chip reference manual. Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox. Signed-off-by: David Jander Signed-off-by: Marc Kleine-Budde Signed-off-by: Zefan Li

can: flexcan: correctly initialize mailboxes

2014-12-01T10:02:35+00:00

commit fc05b884a31dbf259cc73cc856e634ec3acbebb6 upstream. Apparently mailboxes may contain random data at startup, causing some of them being prepared for message reception. This causes overruns being missed or even confusing the IRQ check for trasmitted messages, increasing the transmit counter instead of the error counter. This patch initializes all mailboxes after the FIFO as RX_INACTIVE. Signed-off-by: David Jander Signed-off-by: Marc Kleine-Budde Signed-off-by: Zefan Li

can: flexcan: mark TX mailbox as TX_INACTIVE

2014-12-01T10:02:35+00:00

commit c32fe4ad3e4861b2bfa1f44114c564935a123dda upstream. This patch fixes the initialization of the TX mailbox. It is now correctly initialized as TX_INACTIVE not RX_EMPTY. Signed-off-by: Marc Kleine-Budde Signed-off-by: Zefan Li

can: peak_pci: prevent use after free at netdev removal

2014-07-01T03:01:30+00:00

commit 0b5a958cf4df3a5cd578b861471e62138f55c85e upstream. As remarked by Christopher R. Baker in his post at http://marc.info/?l=linux-can&m=139707295706465&w=2 there's a possibility for an use after free condition at device removal. This simplified patch introduces an additional variable to prevent the issue. Thanks for catching this. Reported-by: Christopher R. Baker Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: sja1000: fix {pre,post}_irq() handling and IRQ handler return value

2014-06-07T23:02:15+00:00

commit 2fea6cd303c0d0cd9067da31d873b6a6d5bd75e7 upstream. This patch fixes the issue that the sja1000_interrupt() function may have returned IRQ_NONE without processing the optional pre_irq() and post_irq() function before. Further the irq processing counter 'n' is moved to the end of the while statement to return correct IRQ_[NONE|HANDLED] values at error conditions. Reported-by: Wolfgang Grandegger Acked-by: Wolfgang Grandegger Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde [bwh: Backported to 3.2: s/SJA1000_IER/REG_IER/; s/SJA1000_IR/REG_IR/] Signed-off-by: Ben Hutchings Cc: Qiang Huang Signed-off-by: Greg Kroah-Hartman

can: c_can: Set reserved bit in IFx_MASK2 to 1 on write

2014-06-07T23:02:07+00:00

commit 2bd3bc4e8472424f1a6009825397639a8968920a upstream. According to C_CAN documentation, the reserved bit in IFx_MASK2 register is fixed 1. Signed-off-by: Alexander Stein Signed-off-by: Marc Kleine-Budde [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings Cc: Qiang Huang Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails

2014-03-24T04:37:07+00:00

commit 7e9e148af01ef388efb6e2490805970be4622792 upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: flexcan: fix flexcan_chip_start() on imx6

2013-12-04T18:50:14+00:00

commit 0d1862ea1a5bb876cf05555a7307080cb75bf379 upstream. In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Reported-by: Lothar Waßmann Tested-by: Lothar Waßmann [mkl: adjusted context for stable] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman