kernel/linux.git/drivers/net/can/usb, branch v6.19.11

can: gs_usb: gs_can_open(): always configure bitrates before starting device

2026-03-19T15:15:00+00:00

commit 2df6162785f31f1bbb598cfc3b08e4efc88f80b6 upstream. So far the driver populated the struct can_priv::do_set_bittiming() and struct can_priv::fd::do_set_data_bittiming() callbacks. Before bringing up the interface, user space has to configure the bitrates. With these callbacks the configuration is directly forwarded into the CAN hardware. Then the interface can be brought up. An ifdown-ifup cycle (without changing the bit rates) doesn't re-configure the bitrates in the CAN hardware. This leads to a problem with the CANable-2.5 [1] firmware, which resets the configured bit rates during ifdown. To fix the problem remove both bit timing callbacks and always configure the bitrates in the struct net_device_ops::ndo_open() callback. [1] https://github.com/Elmue/CANable-2.5-firmware-Slcan-and-Candlelight Cc: stable@vger.kernel.org Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://patch.msgid.link/20260219-gs_usb-always-configure-bitrates-v2-1-671f8ba5b0a5@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb: f81604: handle bulk write errors properly

2026-03-12T11:09:29+00:00

commit 51f94780720fa90c424f67e3e9784cb8ef8190e5 upstream. If a write urb fails then more needs to be done other than just logging the message, otherwise the transmission could be stalled. Properly increment the error counters and wake up the queues so that data will continue to flow. Cc: Ji-Ze Hong (Peter Hong) Cc: Marc Kleine-Budde Cc: Vincent Mailhol Cc: stable@kernel.org Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026022334-slackness-dynamic-9195@gregkh Fixes: 88da17436973 ("can: usb: f81604: add Fintek F81604 support") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb: f81604: handle short interrupt urb messages properly

2026-03-12T11:09:29+00:00

commit 7299b1b39a255f6092ce4ec0b65f66e9d6a357af upstream. If an interrupt urb is received that is not the correct length, properly detect it and don't attempt to treat the data as valid. Cc: Ji-Ze Hong (Peter Hong) Cc: Marc Kleine-Budde Cc: Vincent Mailhol Cc: stable@kernel.org Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026022331-opal-evaluator-a928@gregkh Fixes: 88da17436973 ("can: usb: f81604: add Fintek F81604 support") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb: etas_es58x: correctly anchor the urb in the read bulk callback

2026-03-12T11:09:29+00:00

commit 5eaad4f768266f1f17e01232ffe2ef009f8129b7 upstream. When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also. Cc: Vincent Mailhol Cc: Marc Kleine-Budde Cc: stable@kernel.org Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman Reviewed-by: Vincent Mailhol Tested-by: Vincent Mailhol Link: https://patch.msgid.link/2026022320-poser-stiffly-9d84@gregkh Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: ucan: Fix infinite loop from zero-length messages

2026-03-12T11:09:29+00:00

commit 1e446fd0582ad8be9f6dafb115fc2e7245f9bea7 upstream. If a broken ucan device gets a message with the message length field set to 0, then the driver will loop for forever in ucan_read_bulk_callback(), hanging the system. If the length is 0, just skip the message and go on to the next one. This has been fixed in the kvaser_usb driver in the past in commit 0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in command parsers"), so there must be some broken devices out there like this somewhere. Cc: Marc Kleine-Budde Cc: Vincent Mailhol Cc: stable@kernel.org Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026022319-huff-absurd-6a18@gregkh Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb: f81604: correctly anchor the urb in the read bulk callback

2026-03-12T11:09:29+00:00

commit 952caa5da10bed22be09612433964f6877ba0dde upstream. When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also. Cc: Ji-Ze Hong (Peter Hong) Cc: Marc Kleine-Budde Cc: Vincent Mailhol Cc: stable@kernel.org Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026022334-starlight-scaling-2cea@gregkh Fixes: 88da17436973 ("can: usb: f81604: add Fintek F81604 support") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message

2026-03-12T11:09:28+00:00

commit 38a01c9700b0dcafe97dfa9dc7531bf4a245deff upstream. When looking at the data in a USB urb, the actual_length is the size of the buffer passed to the driver, not the transfer_buffer_length which is set by the driver as the max size of the buffer. When parsing the messages in ems_usb_read_bulk_callback() properly check the size both at the beginning of parsing the message to make sure it is big enough for the expected structure, and at the end of the message to make sure we don't overflow past the end of the buffer for the next message. Cc: Vincent Mailhol Cc: Marc Kleine-Budde Cc: stable@kernel.org Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026022316-answering-strainer-a5db@gregkh Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: gs_usb_receive_bulk_callback(): fix error message

2026-01-23T17:16:37+00:00

Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error") a failing resubmit URB will print an info message. In the case of a short read where netdev has not yet been assigned, initialize as NULL to avoid dereferencing an undefined value. Also report the error value of the failed resubmit. Fixes: 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error") Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/all/20260119181904.1209979-1-kuba@kernel.org/ Link: https://patch.msgid.link/20260120-gs_usb-fix-error-message-v1-1-6be04de572bc@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak

2026-01-16T19:40:52+00:00

Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback usb_8dev_read_bulk_callback(), the URBs are processed and resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-5-4b8cb2915571@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak

2026-01-16T19:40:46+00:00

Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-4-4b8cb2915571@pengutronix.de Signed-off-by: Marc Kleine-Budde