kernel/linux.git/drivers/net/can/flexcan, branch v6.6.133

can: flexcan: disable transceiver during system PM

2025-03-28T20:59:54+00:00

commit 5a19143124be42900b3fbc9ada3c919632eb45eb upstream. During system PM, if no wakeup requirement, disable transceiver to save power. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable@vger.kernel.org Reviewed-by: Frank Li Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com [mkl: add newlines] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: flexcan: only change CAN state when link up in system PM

2025-03-28T20:59:54+00:00

commit fd99d6ed20234b83d65b9c5417794343577cf3e5 upstream. After a suspend/resume cycle on a down interface, it will come up as ERROR-ACTIVE. $ ip -details -s -s a s dev flexcan0 3: flexcan0: mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000 $ sudo systemctl suspend $ ip -details -s -s a s dev flexcan0 3: flexcan0: mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000 And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable@vger.kernel.org Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com Reported-by: Marc Kleine-Budde Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de [mkl: add newlines] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: flexcan: remove the auto stop mode for IMX93

2023-10-06T10:54:33+00:00

IMX93 A0 chip involve the internal q-channel handshake in LPCG and CCM to automatically handle the Flex-CAN IPG STOP signal. Only after FLEX-CAN enter stop mode then can support the self-wakeup feature. But meet issue when do the continue system PM stress test. When config the CAN as wakeup source, the first time after system suspend, any data on CAN bus can wakeup the system, this is as expect. But the second time when system suspend, data on CAN bus can't wakeup the system. If continue this test, we find in odd time system enter suspend, CAN can wakeup the system, but in even number system enter suspend, CAN can't wakeup the system. IC find a bug in the auto stop mode logic, and can't fix it easily. So for the new imx93 A1, IC drop the auto stop mode and involve the GPR to support stop mode (used before). IC define a bit in GPR which can trigger the IPG STOP signal to Flex-CAN, let it go into stop mode. And NXP claim to drop IMX93 A0, and only support IMX93 A1. So this patch remove the auto stop mode, and add flag FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR to imx93. Signed-off-by: Haibo Chen Link: https://lore.kernel.org/all/20230726112458.3524165-2-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde

can: flexcan: fix the return value handle for platform_get_irq()

2023-07-31T08:12:56+00:00

There is no possible for platform_get_irq() to return 0 and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by: Ruan Jinjie Link: https://lore.kernel.org/all/20230731075252.359965-1-ruanjinjie@huawei.com Signed-off-by: Marc Kleine-Budde

can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()

2023-07-28T07:45:24+00:00

Rename the rx_offload_get_echo_skb() function to can_rx_offload_get_echo_skb_queue_timestamp(), since it inserts the echo skb into the rx-offload queue sorted by timestamp. This is a preparation for adding can_rx_offload_get_echo_skb_queue_tail(), which adds the echo skb to the end of the queue. This is intended for devices that do not support timestamps. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-1-716e542d14d5@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: flexcan: Convert to platform remove callback returning void

2023-05-15T20:53:50+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230512212725.143824-8-u.kleine-koenig@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: flexcan: avoid unbalanced pm_runtime_enable warning

2022-12-19T15:08:27+00:00

When do suspend/resume, meet the following warning message: [ 30.028336] flexcan 425b0000.can: Unbalanced pm_runtime_enable! Balance the pm_runtime_force_suspend() and pm_runtime_force_resume(). Fixes: 8cb53b485f18 ("can: flexcan: add auto stop mode for IMX93 to support wakeup") Signed-off-by: Haibo Chen Link: https://lore.kernel.org/all/20221213094351.3023858-1-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde

can: flexcan: add auto stop mode for IMX93 to support wakeup

2022-12-12T10:39:12+00:00

IMX93 do not contain a GPR to config the stop mode, it will set the flexcan into stop mode automatically once the ARM core go into low power mode (WFI instruct) and gate off the flexcan related clock automatically. But to let these logic work as expect, before ARM core go into low power mode, need to make sure the flexcan related clock keep on. To support stop mode and wakeup feature on imx93, this patch add a new fsl_imx93_devtype_data to separate from imx8mp. Signed-off-by: Haibo Chen Link: https://lore.kernel.org/all/1669116752-4260-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde

can: dev: fix skb drop check

2022-11-07T13:00:27+00:00

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-22T20:02:10+00:00

drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski