kernel/linux.git/drivers/net/can/flexcan, branch v6.1.168

can: flexcan: disable transceiver during system PM

2025-03-28T20:59:00+00:00

commit 5a19143124be42900b3fbc9ada3c919632eb45eb upstream. During system PM, if no wakeup requirement, disable transceiver to save power. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable@vger.kernel.org Reviewed-by: Frank Li Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com [mkl: add newlines] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: flexcan: only change CAN state when link up in system PM

2025-03-28T20:59:00+00:00

commit fd99d6ed20234b83d65b9c5417794343577cf3e5 upstream. After a suspend/resume cycle on a down interface, it will come up as ERROR-ACTIVE. $ ip -details -s -s a s dev flexcan0 3: flexcan0: mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000 $ sudo systemctl suspend $ ip -details -s -s a s dev flexcan0 3: flexcan0: mtu 16 qdisc pfifo_fast state DOWN group default qlen 10 link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000 And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did. Fixes: 4de349e786a3 ("can: flexcan: fix resume function") Cc: stable@vger.kernel.org Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com Reported-by: Marc Kleine-Budde Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de [mkl: add newlines] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: fix skb drop check

2022-11-07T13:00:27+00:00

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-22T20:02:10+00:00

drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski

can: flexcan: flexcan_mailbox_read() fix return value for drop = true

2022-09-21T07:48:51+00:00

The following happened on an i.MX25 using flexcan with many packets on the bus: The rx-offload queue reached a length more than skb_queue_len_max. In can_rx_offload_offload_one() the drop variable was set to true which made the call to .mailbox_read() (here: flexcan_mailbox_read()) to _always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too. can_rx_offload_irq_offload_fifo() looks as follows: | while (1) { | skb = can_rx_offload_offload_one(offload, 0); | if (IS_ERR(skb)) | continue; | if (!skb) | break; | ... | } The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is requested, even if there is no CAN frame pending. As the i.MX25 is a single core CPU, while the rx-offload processing is active, there is no thread to process packets from the offload queue. So the queue doesn't get any shorter and this results is a tight loop. Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested, return NULL if no CAN frame is pending. Changes since v1: https://lore.kernel.org/all/20220810144536.389237-1-u.kleine-koenig@pengutronix.de - don't break in can_rx_offload_irq_offload_fifo() in case of an error, return NULL in flexcan_mailbox_read() in case of no pending CAN frame instead Fixes: 4e9c9484b085 ("can: rx-offload: Prepare for CAN FD support") Link: https://lore.kernel.org/all/20220811094254.1864367-1-mkl@pengutronix.de Cc: stable@vger.kernel.org # v5.5 Suggested-by: Uwe Kleine-König Reviewed-by: Uwe Kleine-König Tested-by: Thorsten Scherer Signed-off-by: Marc Kleine-Budde

can: flexcan: Switch to use dev_err_probe() helper

2022-09-14T13:37:32+00:00

dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/all/20220914134030.3782754-1-yangyingliang@huawei.com Signed-off-by: Marc Kleine-Budde

can: flexcan: fix typo: FLEXCAN_QUIRK_SUPPPORT_* -> FLEXCAN_QUIRK_SUPPORT_*

2022-09-05T20:00:42+00:00

Fix typo "FLEXCAN_QUIRK_SUPPPORT_*" -> "FLEXCAN_QUIRK_SUPPORT_". Link: https://lore.kernel.org/all/20220811093617.1861938-3-mkl@pengutronix.de Fixes: f04aefd4659b ("can: flexcan: mark RX via mailboxes as supported on MCF5441X") Fixes: c5c88591040e ("can: flexcan: add more quirks to describe RX path capabilities") Signed-off-by: Marc Kleine-Budde

can: tree-wide: advertise software timestamping capabilities

2022-07-28T09:44:01+00:00

Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr [mkl: mscan: add missing mscan_ethtool_ops] Signed-off-by: Marc Kleine-Budde

can: flexcan: export flexcan_ethtool_ops and remove flexcan_set_ethtool_ops()

2022-07-27T11:09:01+00:00

The function flexcan_set_ethtool_ops() does one thing: populate net_device::ethtool_ops. Instead, it is possible to directly assign this field and remove one function call and slightly reduce the object size. To do so, export flexcan_ethtool_ops so it becomes visible to flexcan-core.c. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727104939.279022-4-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde

can: can-dev: remove obsolete CAN LED support

2022-05-19T20:15:51+00:00

Since commit 30f3b42147ba6f ("can: mark led trigger as broken") the CAN specific LED support was disabled and marked as BROKEN. As the common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work now the code can be removed as preparation for a CAN netdevice Kconfig rework. Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.net Suggested-by: Vincent Mailhol Signed-off-by: Oliver Hartkopp [mkl: remove led.h from MAINTAINERS] Signed-off-by: Marc Kleine-Budde