kernel/linux.git/drivers/net/can/dev.c, branch v4.4.235

can: dev: call netif_carrier_off() in register_candev()

2019-09-06T08:18:05+00:00

[ Upstream commit c63845609c4700488e5eacd6ab4d06d5d420e5ef ] CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by: Rasmus Villemoes Acked-by: Willem de Bruijn Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by removing it

2019-02-06T18:43:04+00:00

commit 7b12c8189a3dc50638e7d53714c88007268d47ef upstream. This patch revert commit 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by: Manfred Schlaegl Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb

2018-12-01T08:46:34+00:00

commit 7da11ba5c5066dadc2e96835a6233d56d7b7764a upstream. Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds

2018-12-01T08:46:34+00:00

commit e7a6994d043a1e31d5b17706a22ce33d2a3e4cdc upstream. If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to access frame length

2018-12-01T08:46:34+00:00

commit 200f5c49f7a2cd694436bfc6cb0662b794c96736 upstream. This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: can_get_echo_skb(): factor out non sending code to __can_get_echo_skb()

2018-12-01T08:46:34+00:00

commit a4310fa2f24687888ce80fdb0e88583561a23700 upstream. This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: dev: fix deadlock reported after bus-off

2016-10-07T13:23:40+00:00

commit 9abefcb1aaa58b9d5aa40a8bb12c87d02415e4c8 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24 Signed-off-by: Sergei Miroshnichenko Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: fix oops caused by wrong rtnl dellink usage

2016-08-10T09:49:29+00:00

commit 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 upstream. For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: fix handling of unmodifiable configuration options fix

2016-08-10T09:49:29+00:00

commit bce271f255dae8335dc4d2ee2c4531e09cc67f5a upstream. With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: fix handling of unmodifiable configuration options

2016-06-01T19:15:50+00:00

commit bb208f144cf3f59d8f89a09a80efd04389718907 upstream. As described in 'can: m_can: tag current CAN FD controllers as non-ISO' (6cfda7fbebe) it is possible to define fixed configuration options by setting the according bit in 'ctrlmode' and clear it in 'ctrlmode_supported'. This leads to the incovenience that the fixed configuration bits can not be passed by netlink even when they have the correct values (e.g. non-ISO, FD). This patch fixes that issue and not only allows fixed set bit values to be set again but now requires(!) to provide these fixed values at configuration time. A valid CAN FD configuration consists of a nominal/arbitration bittiming, a data bittiming and a control mode with CAN_CTRLMODE_FD set - which is now enforced by a new can_validate() function. This fix additionally removed the inconsistency that was prohibiting the support of 'CANFD-only' controller drivers, like the RCar CAN FD. For this reason a new helper can_set_static_ctrlmode() has been introduced to provide a proper interface to handle static enabled CAN controller options. Reported-by: Ramesh Shanmugasundaram Signed-off-by: Oliver Hartkopp Reviewed-by: Ramesh Shanmugasundaram Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman