kernel/linux.git/drivers/net/can/cc770, branch linux-6.9.y

can: cc770_platform: Convert to platform remove callback returning void

2023-05-15T20:53:49+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230512212725.143824-6-u.kleine-koenig@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: cc770_isa: Convert to platform remove callback returning void

2023-05-15T20:53:49+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230512212725.143824-5-u.kleine-koenig@pengutronix.de Signed-off-by: Marc Kleine-Budde

net: Use of_property_read_bool() for boolean properties

2023-03-16T17:41:28+00:00

It is preferred to use typed property access functions (i.e. of_property_read_ functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Simon Horman Acked-by: Marc Kleine-Budde # for net/can Acked-by: Kalle Valo Acked-by: Nicolas Ferre Acked-by: Francois Romieu Reviewed-by: Wei Fang Signed-off-by: Rob Herring Signed-off-by: David S. Miller

can: cc770: cc770_isa_probe(): add missing free_cc770dev()

2022-11-24T15:09:53+00:00

Add the missing free_cc770dev() before return from cc770_isa_probe() in the register_cc770dev() error handling case. In addition, remove blanks before goto labels. Fixes: 7e02e5433e00 ("can: cc770: legacy CC770 ISA bus driver") Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/all/1668168557-6024-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde

can: dev: fix skb drop check

2022-11-07T13:00:27+00:00

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde

can: tree-wide: advertise software timestamping capabilities

2022-07-28T09:44:01+00:00

Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr [mkl: mscan: add missing mscan_ethtool_ops] Signed-off-by: Marc Kleine-Budde

can: add CAN_ERR_CNT flag to notify availability of error counter

2022-07-20T07:27:37+00:00

Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: do not increase tx_bytes statistics for RTR frames

2022-01-05T11:09:05+00:00

The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::tx_bytes should not be increased when sending RTR frames. The function can_get_echo_skb() already returns the correct length, even for RTR frames (c.f. [1]). However, for historical reasons, the drivers do not use can_get_echo_skb()'s return value and instead, most of them store a temporary length (or dlc) in some local structure or array. Using the return value of can_get_echo_skb() solves the issue. After doing this, such length/dlc fields become unused and so this patch does the adequate cleaning when needed. This patch fixes all the CAN drivers. Finally, can_get_echo_skb() is decorated with the __must_check attribute in order to force future drivers to correctly use its return value (else the compiler would emit a warning). [1] commit ed3320cec279 ("can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames") Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: Yasushi SHOJI Cc: Oliver Hartkopp Cc: Stephane Grosjean Cc: Andreas Larsson Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 [mkl: add conversion for grcan] Signed-off-by: Marc Kleine-Budde

can: do not increase rx_bytes statistics for RTR frames

2022-01-05T11:09:05+00:00

can: do not increase rx statistics when generating a CAN rx error message frame

2022-01-05T11:09:05+00:00

The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the rx_packets and rx_bytes fields of struct net_device_stats because no actual payload were transmitted on the wire. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr CC: Marc Kleine-Budde CC: Nicolas Ferre CC: Alexandre Belloni CC: Ludovic Desroches CC: Chandrasekar Ramakrishnan CC: Maxime Ripard CC: Chen-Yu Tsai CC: Jernej Skrabec CC: Appana Durga Kedareswara rao CC: Naga Sureshkumar Relli CC: Michal Simek CC: Stephane Grosjean Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 Signed-off-by: Marc Kleine-Budde