kernel/linux.git/drivers/net/bareudp.c, branch v5.15.208

bareudp: Pull inner IP header on xmit.

2024-10-17T13:10:47+00:00

[ Upstream commit c471236b2359e6b27388475dd04fff0a5e2bf922 ] Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore we need to ensure that the inner IP header is part of the skb's linear data. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bareudp: Pull inner IP header in bareudp_udp_encap_recv().

2024-10-17T13:10:46+00:00

[ Upstream commit 45fa29c85117170b0508790f878b13ec6593c888 ] Bareudp reads the inner IP header to get the ECN value. Therefore, it needs to ensure that it's part of the skb's linear data. This is similar to the vxlan and geneve fixes for that same problem: * commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().") * commit 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bareudp: Fix device stats updates.

2024-09-12T09:07:47+00:00

[ Upstream commit 4963d2343af81f493519f9c3ea9f2169eaa7353a ] Bareudp devices update their stats concurrently. Therefore they need proper atomic increments. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bareudp: use ipv6_mod_enabled to check if IPv6 enabled

2022-04-08T12:23:41+00:00

[ Upstream commit e077ed58c243afc197bc2a2ba0e1ff61135e4ec2 ] bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled. But if user start kernel with ipv6.disable=1, the bareudp sock will created failed, which cause the interface open failed even with ethertype ip. e.g. # ip link add bareudp1 type bareudp dstport 2 ethertype ip # ip link set bareudp1 up RTNETLINK answers: Address family not supported by protocol Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h. Reported-by: Jianlin Shi Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Hangbin Liu Link: https://lore.kernel.org/r/20220315062618.156230-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bareudp: Fix invalid read beyond skb's linear data

2021-08-09T22:37:43+00:00

Data beyond the UDP header might not be part of the skb's linear data. Use skb_copy_bits() instead of direct access to skb->data+X, so that we read the correct bytes even on a fragmented skb. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.") Signed-off-by: Guillaume Nault Link: https://lore.kernel.org/r/7741c46545c6ef02e70c80a9b32814b22d9616b3.1628264975.git.gnault@redhat.com Signed-off-by: Jakub Kicinski

bareudp: allow redirecting bareudp packets to eth devices

2021-06-28T19:44:17+00:00

Even though bareudp transports L3 data (typically IP or MPLS), it needs to reset the mac_header pointer, so that other parts of the stack don't mistakenly access the outer header after the packet has been decapsulated. This allows to push an Ethernet header to bareudp packets and redirect them to an Ethernet device: $ tc filter add dev bareudp0 ingress matchall \ action vlan push_eth dst_mac 00:00:5e:00:53:01 \ src_mac 00:00:5e:00:53:00 \ action mirred egress redirect dev eth0 Without this patch, push_eth refuses to add an ethernet header because the skb appears to already have a MAC header. Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller

bareudp: allow UDP L4 GRO passthrou

2021-03-31T00:06:50+00:00

Similar to the previous commit, let even geneve passthrou the L4 GRO packets Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

udp: call udp_encap_enable for v6 sockets when enabling encap

2021-02-05T02:37:14+00:00

When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by: Willem de Bruijn Signed-off-by: Xin Long Signed-off-by: Jakub Kicinski

bareudp: add NETIF_F_FRAGLIST flag for dev features

2021-01-19T03:57:02+00:00

Like vxlan and geneve, bareudp also needs this dev feature to support some protocol's HW GSO. Signed-off-by: Xin Long Signed-off-by: Jakub Kicinski

net: bareudp: simplify error paths calling dellink

2021-01-12T01:09:23+00:00

bareudp_dellink() only needs the device list to hand it to unregister_netdevice_queue(). We can pass NULL in, and unregister_netdevice_queue() will do the unregistering. There is no chance for batching on the error path, anyway. Suggested-by: Cong Wang Reviewed-by: Cong Wang Link: https://lore.kernel.org/r/20210111052922.2145003-1-kuba@kernel.org Signed-off-by: Jakub Kicinski