kernel/linux.git/drivers/net/arcnet/com90io.c, branch v6.19.11

net: fill in MODULE_DESCRIPTION()s for missing arcnet

2024-02-15T16:03:46+00:00

W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the ARC modules. Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20240214152741.670178-8-leitao@debian.org Signed-off-by: Jakub Kicinski

net: remove single-byte netdev->dev_addr writes

2021-10-13T17:03:59+00:00

Make the drivers which use single-byte netdev addresses (netdev->addr_len == 1) use the appropriate address setting helpers. arcnet copies from int variables and io reads a lot, so add a helper for arcnet drivers to use. Similar helper could be reused for phonet and appletalk but there isn't any good central location where we could put it, and netdevice.h is already very crowded. Acked-by: Sebastian Reichel # for HSI Link: https://lore.kernel.org/r/20211012142757.4124842-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: arcnet: Fix RESET flag handling

2021-01-30T04:54:06+00:00

The main arcnet interrupt handler calls arcnet_close() then arcnet_open(), if the RESET status flag is encountered. This is invalid: 1) In general, interrupt handlers should never call ->ndo_stop() and ->ndo_open() functions. They are usually full of blocking calls and other methods that are expected to be called only from drivers init and exit code paths. 2) arcnet_close() contains a del_timer_sync(). If the irq handler interrupts the to-be-deleted timer, del_timer_sync() will just loop forever. 3) arcnet_close() also calls tasklet_kill(), which has a warning if called from irq context. 4) For device reset, the sequence "arcnet_close(); arcnet_open();" is not complete. Some children arcnet drivers have special init/exit code sequences, which then embed a call to arcnet_open() and arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c. Run the device RESET sequence from a scheduled workqueue instead. Signed-off-by: Ahmed S. Darwish Signed-off-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20210128194802.727770-1-a.darwish@linutronix.de Signed-off-by: Jakub Kicinski

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

arcnet: com90io: Mark expected switch fall-throughs

2019-07-29T16:38:34+00:00

Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90io.c: In function 'com90io_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90io.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90io.c:366:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90io.c:367:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90io.c:368:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Annotate hardware config module parameters in drivers/net/arcnet/

2017-04-20T11:02:32+00:00

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/net/arcnet/. Suggested-by: Alan Cox Signed-off-by: David Howells cc: Michael Grzeschik cc: netdev@vger.kernel.org

arcnet: Add com9026.h to standardize COM9026_REG_

2015-09-23T06:44:27+00:00

Deduplicate the COM9026 registers. Signed-off-by: Joe Perches Signed-off-by: Michael Grzeschik

arcnet: com90io: Use arcnet_ routines

2015-09-23T06:44:26+00:00
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_ equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by: Joe Perches Signed-off-by: Michael Grzeschik

arcnet: Move files out of include/linux

2015-09-23T06:44:25+00:00
These #include files don't need to be in the include/linux directory as they can be local to drivers/net/arcnet/ Move them and update the #include statements. Update the MAINTAINERS file pattern by deleting arcdevice from the NETWORKING block as arcnet is currently unmaintained. Signed-off-by: Joe Perches Signed-off-by: Michael Grzeschik