kernel/linux.git/drivers/net/Makefile, branch linux-5.11.y

net: Add mhi-net driver

2020-11-06T00:54:01+00:00

This patch adds a new network driver implementing MHI transport for network packets. Packets can be in any format, though QMAP (rmnet) is the usual protocol (flow control + PDN mux). It support two MHI devices, IP_HW0 which is, the path to the IPA (IP accelerator) on qcom modem, And IP_SW0 which is the software driven IP path (to modem CPU). Signed-off-by: Loic Poulain Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/1604424234-24446-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski

wimax: move out to staging

2020-10-29T18:27:45+00:00

There are no known users of this driver as of October 2020, and it will be removed unless someone turns out to still need it in future releases. According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there have been many public wimax networks, but it appears that many of these have migrated to LTE or discontinued their service altogether. As most PCs and phones lack WiMAX hardware support, the remaining networks tend to use standalone routers. These almost certainly run Linux, but not a modern kernel or the mainline wimax driver stack. NetworkManager appears to have dropped userspace support in 2015 https://bugzilla.gnome.org/show_bug.cgi?id=747846, the www.linuxwimax.org site had already shut down earlier. WiMax is apparently still being deployed on airport campus networks ("AeroMACS"), but in a frequency band that was not supported by the old Intel 2400m (used in Sandy Bridge laptops and earlier), which is the only driver using the kernel's wimax stack. Move all files into drivers/staging/wimax, including the uapi header files and documentation, to make it easier to remove it when it gets to that. Only minimal changes are made to the source files, in order to make it possible to port patches across the move. Also remove the MAINTAINERS entry that refers to a broken mailing list and website. Acked-by: Jakub Kicinski Acked-by: Greg Kroah-Hartman Acked-By: Inaky Perez-Gonzalez Acked-by: Johannes Berg Suggested-by: Inaky Perez-Gonzalez Signed-off-by: Arnd Bergmann

net: mdio: Move MDIO drivers into a new subdirectory

2020-08-27T13:55:50+00:00

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The mdio core is however left in the phy directory, due to mutual dependencies between the MDIO core and the PHY core. Take this opportunity to sort the Kconfig based on the menuconfig strings, and move the multiplexers to the end with a separating comment. v2: Fix typo in commit message Acked-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: pcs: Move XPCS into new PCS subdirectory

2020-08-27T13:55:50+00:00

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the new directory. Move the header file into a subdirectory include/linux/pcs Start a naming convention of all PCS files use the prefix pcs-, and rename the XPCS files to fit. v2: Add include/linux/pcs v4: Fix include path in stmmac. Remove PCS_DEVICES to avoid new prompts Cc: Jose Abreu Reviewed-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

soc: qcom: ipa: support build of IPA code

2020-03-09T05:07:10+00:00

Add build and Kconfig support for the Qualcomm IPA driver. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.

2020-02-24T21:31:42+00:00

The Bareudp tunnel module provides a generic L3 encapsulation tunnelling module for tunnelling different protocols like MPLS, IP,NSH etc inside a UDP tunnel. Signed-off-by: Martin Varghese Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-01-29T18:09:44+00:00

Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...

thunderbolt: Update Kconfig entries to USB4

2019-12-18T14:39:18+00:00

Since the driver now supports USB4 which is the standard going forward, update the Kconfig entry to mention this and rename the entry from CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the correct option if they want to enable USB4. Also do the same for Thunderbolt network driver. Signed-off-by: Mika Westerberg Cc: David S. Miller Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman

net: WireGuard secure network tunnel

2019-12-09T01:48:42+00:00

WireGuard is a layer 3 secure networking tunnel made specifically for the kernel, that aims to be much simpler and easier to audit than IPsec. Extensive documentation and description of the protocol and considerations, along with formal proofs of the cryptography, are available at: * https://www.wireguard.com/ * https://www.wireguard.com/papers/wireguard.pdf This commit implements WireGuard as a simple network device driver, accessible in the usual RTNL way used by virtual network drivers. It makes use of the udp_tunnel APIs, GRO, GSO, NAPI, and the usual set of networking subsystem APIs. It has a somewhat novel multicore queueing system designed for maximum throughput and minimal latency of encryption operations, but it is implemented modestly using workqueues and NAPI. Configuration is done via generic Netlink, and following a review from the Netlink maintainer a year ago, several high profile userspace tools have already implemented the API. This commit also comes with several different tests, both in-kernel tests and out-of-kernel tests based on network namespaces, taking profit of the fact that sockets used by WireGuard intentionally stay in the namespace the WireGuard interface was originally created, exactly like the semantics of userspace tun devices. See wireguard.com/netns/ for pictures and examples. The source code is fairly short, but rather than combining everything into a single file, WireGuard is developed as cleanly separable files, making auditing and comprehension easier. Things are laid out as follows: * noise.[ch], cookie.[ch], messages.h: These implement the bulk of the cryptographic aspects of the protocol, and are mostly data-only in nature, taking in buffers of bytes and spitting out buffers of bytes. They also handle reference counting for their various shared pieces of data, like keys and key lists. * ratelimiter.[ch]: Used as an integral part of cookie.[ch] for ratelimiting certain types of cryptographic operations in accordance with particular WireGuard semantics. * allowedips.[ch], peerlookup.[ch]: The main lookup structures of WireGuard, the former being trie-like with particular semantics, an integral part of the design of the protocol, and the latter just being nice helper functions around the various hashtables we use. * device.[ch]: Implementation of functions for the netdevice and for rtnl, responsible for maintaining the life of a given interface and wiring it up to the rest of WireGuard. * peer.[ch]: Each interface has a list of peers, with helper functions available here for creation, destruction, and reference counting. * socket.[ch]: Implementation of functions related to udp_socket and the general set of kernel socket APIs, for sending and receiving ciphertext UDP packets, and taking care of WireGuard-specific sticky socket routing semantics for the automatic roaming. * netlink.[ch]: Userspace API entry point for configuring WireGuard peers and devices. The API has been implemented by several userspace tools and network management utility, and the WireGuard project distributes the basic wg(8) tool. * queueing.[ch]: Shared function on the rx and tx path for handling the various queues used in the multicore algorithms. * send.c: Handles encrypting outgoing packets in parallel on multiple cores, before sending them in order on a single core, via workqueues and ring buffers. Also handles sending handshake and cookie messages as part of the protocol, in parallel. * receive.c: Handles decrypting incoming packets in parallel on multiple cores, before passing them off in order to be ingested via the rest of the networking subsystem with GRO via the typical NAPI poll function. Also handles receiving handshake and cookie messages as part of the protocol, in parallel. * timers.[ch]: Uses the timer wheel to implement protocol particular event timeouts, and gives a set of very simple event-driven entry point functions for callers. * main.c, version.h: Initialization and deinitialization of the module. * selftest/*.h: Runtime unit tests for some of the most security sensitive functions. * tools/testing/selftests/wireguard/netns.sh: Aforementioned testing script using network namespaces. This commit aims to be as self-contained as possible, implementing WireGuard as a standalone module not needing much special handling or coordination from the network subsystem. I expect for future optimizations to the network stack to positively improve WireGuard, and vice-versa, but for the time being, this exists as intentionally standalone. We introduce a menu option for CONFIG_WIREGUARD, as well as providing a verbose debug log and self-tests via CONFIG_WIREGUARD_DEBUG. Signed-off-by: Jason A. Donenfeld Cc: David Miller Cc: Greg KH Cc: Linus Torvalds Cc: Herbert Xu Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller

net: Always descend into dsa/

2019-05-14T22:20:11+00:00

Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y, CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a functional state where the mock-up driver is registered. Turns out that we are not descending into drivers/net/dsa/ unconditionally, and we won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up mdio device registration. Reported-by: Jiri Pirko Fixes: 40013ff20b1b ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Tested-by: Jiri Pirko Signed-off-by: David S. Miller