kernel/linux.git/drivers/mtd, branch v6.1.175

mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T

2026-06-01T15:39:31+00:00

[ Upstream commit a9180c298d3527f43563d02a62cb9e7e145642c6 ] Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program granularity is 16-byte ECC data unit size. JFFS2 supports write buffer mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE flag in order to enable JFFS2 write buffer mode support. Drop the comment as the same info is now specified in cypress_nor_ecc_init(). Fixes: 6afcc84080c4 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T") Suggested-by: Tudor Ambarus Signed-off-by: Takahiro Kuwano Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/641bfb26c6e059915ae920117b7ec278df1a6f0a.1680760742.git.Takahiro.Kuwano@infineon.com Signed-off-by: Tudor Ambarus Signed-off-by: Sasha Levin

mtd: rawnand: sunxi: fix sunxi_nfc_hw_ecc_read_extra_oob

2026-06-01T15:39:18+00:00

[ Upstream commit 848c13996c55fe4ea6bf5acc3ce6c8c5c944b5f6 ] When dumping the OOB, the bytes at the end where actually copied from the beginning of the OOB instead of current_offset. That leads to something like: OOB: ff ff ff ff ff ff ff ff ea 19 00 3a 83 db aa 8d OOB: 99 09 c8 9a 90 36 35 7d aa 15 13 07 3d 97 b2 a4 OOB: a8 bb 19 b3 07 e9 f6 25 52 d7 1a 23 e2 7e 0a e4 OOB: 52 8a 09 d2 1a 86 3d cf b4 99 43 13 d3 90 33 0b OOB: ff ff ff ff ff ff ff ff ea 19 00 3a 83 db aa 8d OOB: 99 09 c8 9a 90 36 35 7d aa 15 13 07 3d 97 b2 a4 OOB: a8 bb 19 b3 07 e9 f6 25 52 d7 1a 23 e2 7e 0a e4 OOB: 52 8a 09 d2 1a 86 3d cf b4 99 43 13 d3 90 33 0b instead of: OOB: ff ff ff ff ff ff ff ff ea 19 00 3a 83 db aa 8d OOB: 99 09 c8 9a 90 36 35 7d aa 15 13 07 3d 97 b2 a4 OOB: a8 bb 19 b3 07 e9 f6 25 52 d7 1a 23 e2 7e 0a e4 OOB: 52 8a 09 d2 1a 86 3d cf b4 99 43 13 d3 90 33 0b OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff (example with BCH16, user data [8,0], no scrambling) *cur_off (offset from the beginning of the page) was compared to offset (offset from the beginning of the OOB), and then, the nand_change_read_column_op() sets the current position to the beginning of the OOB instead of OOB+offset Fixes: 15d6f118285f ("mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode") Reviewed-by: Jernej Skrabec Signed-off-by: Richard Genoud Signed-off-by: Miquel Raynal Signed-off-by: Sasha Levin

mtd: parsers: ofpart: call of_node_get() for dedicated subpartitions

2026-06-01T15:39:17+00:00

[ Upstream commit e882626c1747653f1f01ea9d12e278e613b11d0f ] In order to parse sub-partitions, add_mtd_partitions() calls parse_mtd_partitions() for all previously found partitions. Each partition will end up being passed to parse_fixed_partitions(), and its of_node will be treated as the ofpart_node. Commit 7cce81df7d26 ("mtd: parsers: ofpart: fix OF node refcount leak in parse_fixed_partitions()") added of_node_put() calls for ofpart_node on all exit paths. In the case where the partition passed to parse_fixed_partitions() has a parent, it is treated as a dedicated partitions node, and of_node_put() is wrongly called for it, even if of_node_get() was not called explicitly. On repeated bind / unbinds of the MTD, the extra of_node_put() ends up decrementing the refcount down to 0, which should never happen, resulting in the following error: OF: ERROR: of_node_release() detected bad of_node_put() on /soc/spi@80007000/flash@0/partitions/partition@0 Call of_node_get() to balance the call to of_node_put() done for dedicated partitions nodes. Fixes: 7cce81df7d26 ("mtd: parsers: ofpart: fix OF node refcount leak in parse_fixed_partitions()") Signed-off-by: Cosmin Tanislav Tested-by: Tommaso Merciai Signed-off-by: Miquel Raynal Signed-off-by: Sasha Levin

mtd: parsers: ofpart: call of_node_put() only in ofpart_fail path

2026-06-01T15:39:17+00:00

[ Upstream commit 0c87dea1aab86116211cb37387c404c9e9231c39 ] ofpart_none can only be reached after the for_each_child_of_node() loop finishes. for_each_child_of_node() correctly calls of_node_put() for all device nodes it iterates over as long as we don't break or jump out of the loop. Calling of_node_put() inside the ofpart_none path will wrongly decrement the ref count of the last node in the for_each_child_of_node() loop. Move the call to of_node_put() under the ofpart_fail label to fix this. Fixes: ebd5a74db74e ("mtd: ofpart: Check availability of reg property instead of name property") Signed-off-by: Cosmin Tanislav Tested-by: Tommaso Merciai Signed-off-by: Miquel Raynal Signed-off-by: Sasha Levin

mtd: spi-nor: swp: check SR_TB flag when getting tb_mask

2026-06-01T15:39:17+00:00

[ Upstream commit 94645aa41bf9ecb87c2ce78b1c3405bfb6074a37 ] When the chip does not support top/bottom block protect, the tb_mask must be set to 0, otherwise SR1 bit5 will be unexpectedly modified. Signed-off-by: Shiji Yang Fixes: 3dd8012a8eeb ("mtd: spi-nor: add TB (Top/Bottom) protect support") Reviewed-by: Michael Walle Reviewed-by: Miquel Raynal Signed-off-by: Pratyush Yadav (Google) Signed-off-by: Sasha Levin

mtd: spi-nor: update spi_nor_fixups::post_sfdp() documentation

2026-06-01T15:39:17+00:00

[ Upstream commit 3620d67b48493c6252bbc873dc88dde81641d56b ] After commit 5273cc6df984 ("mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined") spi_nor_post_sfdp_fixups() isn't called anymore if no SFDP is detected. Update the documentation accordingly. Fixes: 5273cc6df984 ("mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined") Signed-off-by: Jonas Gorski Reviewed-by: Pratyush Yadav Signed-off-by: Pratyush Yadav (Google) Signed-off-by: Sasha Levin

mtd: spi-nor: sfdp: introduce smpt_map_id fixup hook

2026-06-01T15:39:17+00:00

[ Upstream commit f74de390557bf2bcc5dca4a357b41c0701d3f76e ] Certain chips have inconsistent Sector Map Parameter Table (SMPT) data, which leads to the wrong map ID being identified, causing failures to detect the correct sector map. To fix this, introduce smpt_map_id() into the struct spi_nor_fixups. This function will be called after the initial SMPT-based detection, allowing chip-specific logic to correct the map ID. Infineon S25FS512S needs this fixup as it has inconsistency between map ID definition and configuration register value actually obtained. Co-developed-by: Marek Vasut Signed-off-by: Marek Vasut Reviewed-by: Tudor Ambarus Tested-by: Marek Vasut # S25FS512S Signed-off-by: Takahiro Kuwano Reviewed-by: Tudor Ambarus > Signed-off-by: Pratyush Yadav Stable-dep-of: 3620d67b4849 ("mtd: spi-nor: update spi_nor_fixups::post_sfdp() documentation") Signed-off-by: Sasha Levin

mtd: spi-nor: sfdp: introduce smpt_read_dummy fixup hook

2026-06-01T15:39:17+00:00

[ Upstream commit 653f6def567c81f37302f9591ffd54df3e2a11eb ] SMPT contains config detection info that describes opcode, address, and dummy cycles to read sector map config. The dummy cycles parameter can be SMPT_CMD_READ_DUMMY_IS_VARIABLE and in that case nor->read_dummy (initialized as 0) is used. In Infineon flash chips, Read Any Register command with variable dummy cycle is defined in SMPT. S25Hx/S28Hx flash has 0 dummy cycle by default to read volatile regiters and nor->read_dummy can work. S25FS-S flash has 8 dummy cycles so we need a hook that can fix dummy cycles with actually used value. Inroduce smpt_read_dummy() in struct spi_nor_fixups. It is called when the dummy cycle field in SMPT config detection is 'varialble'. Reviewed-by: Tudor Ambarus Tested-by: Marek Vasut # S25FS512S Signed-off-by: Takahiro Kuwano Signed-off-by: Pratyush Yadav Stable-dep-of: 3620d67b4849 ("mtd: spi-nor: update spi_nor_fixups::post_sfdp() documentation") Signed-off-by: Sasha Levin

mtd: spi-nor: Allow post_sfdp hook to return errors

2026-06-01T15:39:17+00:00

[ Upstream commit e570f7872a34dc290014c80c7bad365d6577836b ] Multi die flashes like s25hl02gt need to determine the page_size at run-time by querying a configuration register for each die. Since the number of dice is determined in an optional SFDP table, SCCR MC, the page size configuration must be done in the post_sfdp hook. Allow post_sfdp to return errors, as reading the configuration register might return errors. Link: https://lore.kernel.org/r/924ab710f128448ec62537cfbb377336e390043c.1680849425.git.Takahiro.Kuwano@infineon.com Signed-off-by: Tudor Ambarus Stable-dep-of: 3620d67b4849 ("mtd: spi-nor: update spi_nor_fixups::post_sfdp() documentation") Signed-off-by: Sasha Levin

mtd: spi-nor: spansion: Add support for Infineon S25FS256T

2026-06-01T15:39:17+00:00

[ Upstream commit 6afcc84080c415df81765c6d773edcba8fc30f6c ] Infineon S25FS256T is 256Mbit Quad SPI NOR flash. The key features and differences comparing to other Spansion/Cypress flash familes are: - 4-byte address mode by factory default - Quad mode is enabled by factory default - OP_READ_FAST_4B(0Ch) is not supported - Supports mixture of 128KB and 64KB sectors by OTP configuration (this patch supports uniform 128KB only due to complexity of non-uniform layout) Tested on Xilinx Zynq-7000 FPGA board. Link: https://www.infineon.com/dgdlac/Infineon-S25FS256T_256Mb_SEMPER_Nano_Flash_Quad_SPI_1.8V-DataSheet-v12_00-EN.pdf?fileId=8ac78c8c80027ecd0180740c5a46707a Signed-off-by: Takahiro Kuwano Link: https://lore.kernel.org/r/097ef04484966593ba1326d0a99462753d7d1073.1677557525.git.Takahiro.Kuwano@infineon.com Signed-off-by: Tudor Ambarus Stable-dep-of: 3620d67b4849 ("mtd: spi-nor: update spi_nor_fixups::post_sfdp() documentation") Signed-off-by: Sasha Levin