kernel/linux.git/drivers/mtd, branch v4.19.16

mtd: rawnand: qcom: fix memory corruption that causes panic

2019-01-16T21:04:34+00:00

commit 81d9bdf59092e4755fc4307c93c4589ef0fe2e0f upstream. This patch fixes a memory corruption that occurred in the qcom-nandc driver since it was converted to nand_scan(). On boot, an affected device will panic from a NPE at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 0 | pgd = (ptrval) | [00000000] *pgd=00000000 | Internal error: Oops: 80000005 [#1] SMP ARM | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0 | Hardware name: Generic DT based system | PC is at (null) | LR is at nand_block_isbad+0x90/0xa4 | pc : [<00000000>] lr : [] psr: 80000013 | sp : cf839d40 ip : 00000000 fp : cfae9e20 | r10: cf815810 r9 : 00000000 r8 : 00000000 | r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : cf815810 | r3 : 00000000 r2 : cfae9810 r1 : ffffffff r0 : cf815810 | Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | [] (nand_block_isbad) from [] | [] (allocate_partition) from [] | [] (add_mtd_partitions) from [] | [] (parse_mtd_partitions) from [] | [] (mtd_device_parse_register) from [] | [] (qcom_nandc_probe) from [] The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_block_bad() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch restores the old behavior by reallocating the shared bam transaction alloc_bam_transaction() after the chip was identified, but before mtd_device_parse_register() (which is an alias for mtd_device_register() - see panic) gets called. This fixes the corruption and the driver is working again. Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Signed-off-by: Christian Lamparter Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: omap2: Pass the parent of pdev to dma_request_chan()

2019-01-09T16:38:37+00:00

commit 9b432630e0150b777c423fdef6a7b8d17dfa70b6 upstream. Commit e1e6255c311b ("mtd: rawnand: omap2: convert driver to nand_scan()") moved part of the init code in the ->attach_chip hook and at the same time changed the struct device object passed to dma_request_chan() (&pdev->dev instead of pdev->dev.parent). Fixes: e1e6255c311b ("mtd: rawnand: omap2: convert driver to nand_scan()") Reported-by: Alexander Sverdlin Cc: Signed-off-by: Boris Brezillon Tested-by: Alexander Sverdlin Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: marvell: prevent timeouts on a loaded machine

2019-01-09T16:38:37+00:00

commit cafb56dd741e61c99709bcd2b193a9a1d36def3b upstream. marvell_nfc_wait_op() waits for completion during 'timeout_ms' milliseconds before throwing an error. While the logic is fine, the value of 'timeout_ms' is given by the core and actually correspond to the maximum time the NAND chip will take to complete the operation. Assuming there is no overhead in the propagation of the interrupt signal to the the NAND controller (through the Ready/Busy line), this delay does not take into account the latency of the operating system. For instance, for a page write, the delay given by the core is rounded up to 1ms. Hence, when the machine is over loaded, there is chances that this timeout will be reached. There are two ways to solve this issue that are not incompatible: 1/ Enlarge the timeout value (if so, how much?). 2/ Check after the waiting method if we did not miss any interrupt because of the OS latency (an interrupt is still pending). In this case, we assume the operation exited successfully. We choose the second approach that is a must in all cases, with the possibility to also modify the timeout value to be, e.g. at least 1 second in all cases. Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: atmel-quadspi: disallow building on ebsa110

2019-01-09T16:38:37+00:00

commit 2a9d92fb3a1282a4659f1bb6d5684018846537b7 upstream. I ran into a link-time error with the atmel-quadspi driver on the EBSA110 platform: drivers/mtd/built-in.o: In function `atmel_qspi_run_command': :(.text+0x1ee3c): undefined reference to `_memcpy_toio' :(.text+0x1ee48): undefined reference to `_memcpy_fromio' The problem is that _memcpy_toio/_memcpy_fromio are not available on that platform, and we have to prevent building the driver there. In case we want to backport this to older kernels: between linux-4.8 and linux-4.20, the Kconfig entry was in drivers/mtd/spi-nor/Kconfig but had the same problem. Link: https://lore.kernel.org/patchwork/patch/812860/ Fixes: 161aaab8a067 ("mtd: atmel-quadspi: add driver for Atmel QSPI controller") Signed-off-by: Arnd Bergmann Reviewed-by: Boris Brezillon Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

mtd: spi-nor: Fix Cadence QSPI page fault kernel panic

2018-12-13T08:16:13+00:00

[ Upstream commit a6a66f80c85e8e20573ca03fabf32445954a88d5 ] The current Cadence QSPI driver caused a kernel panic sporadically when writing to QSPI. The problem was caused by writing more bytes than needed because the QSPI operated on 4 bytes at a time. [ 11.202044] Unable to handle kernel paging request at virtual address bffd3000 [ 11.209254] pgd = e463054d [ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000 [ 11.218202] Internal error: Oops: 7 [#1] SMP ARM [ 11.222797] Modules linked in: [ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f [ 11.235796] Hardware name: Altera SOCFPGA Arria10 [ 11.240487] PC is at __raw_writesl+0x70/0xd4 [ 11.244741] LR is at cqspi_write+0x1a0/0x2cc On a page boundary limit the number of bytes copied from the tx buffer to remain within the page. This patch uses a temporary buffer to hold the 4 bytes to write and then copies only the bytes required from the tx buffer. Reported-by: Adrian Amborzewicz Signed-off-by: Thor Thayer Signed-off-by: Boris Brezillon Signed-off-by: Sasha Levin

mtd: rawnand: qcom: Namespace prefix some commands

2018-12-13T08:16:13+00:00

[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ] PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by: Olof Johansson Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon Signed-off-by: Sasha Levin

mtd: nand: Fix memory allocation in nanddev_bbt_init()

2018-12-08T11:59:06+00:00

commit 40b412897ccb4b98b2cfb2a0aaabed58dd9e2086 upstream. Fix the size of the buffer allocated to store the in-memory BBT. This bug was previously hidden by a different bug, that was fixed in commit d098093ba06e ("mtd: nand: Fix nanddev_neraseblocks()"). Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Cc: Signed-off-by: Frieder Schrempf Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: atmel: fix OF child-node lookup

2018-11-27T15:13:10+00:00

commit 5d1e9c2212ea6b4dd735e4fc3dd6279a365d5d10 upstream. Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). While at it, also fix a related nfc-node reference leak. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: stable # 4.11 Cc: Nicolas Ferre Cc: Josh Wu Cc: Boris Brezillon Signed-off-by: Johan Hovold Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: docg3: don't set conflicting BCH_CONST_PARAMS option

2018-11-21T08:19:19+00:00

commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream. I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik Signed-off-by: Arnd Bergmann Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()

2018-11-21T08:19:19+00:00

commit 91d7b67000c6e9bd605624079fee5a084238ad92 upstream. We return 0 unconditionally in 'cqspi_direct_read_execute()'. However, 'ret' is set to some error codes in several error handling paths. Return 'ret' instead to propagate the error code. Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads") Cc: Signed-off-by: Christophe JAILLET Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman