kernel/linux.git/drivers/mtd/mtdcore.c, branch v5.9.12

mtd: set master partition panic write flag

2020-06-15T17:39:24+00:00

Check and set master panic write flag so that low level drivers can use it to take required action to ensure oops data gets written to assigned mtdoops device partition. Fixes: 9f897bfdd89f ("mtd: Add flag to indicate panic_write") Signed-off-by: Kamal Dasu Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200615155134.32007-1-kdasu.kdev@gmail.com

Merge tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2020-06-10T20:15:17+00:00

Pull MTD updates from Richard Weinberger: "MTD core changes: - partition parser: Support MTD names containing one or more colons. - mtdblock: clear cache_state to avoid writing to bad blocks repeatedly. Raw NAND core changes: - Stop using nand_release(), patched all drivers. - Give more information about the ECC weakness when not matching the chip's requirement. - MAINTAINERS updates. - Support emulated SLC mode on MLC NANDs. - Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. - Take check_only into account. - Add an invalid ECC mode to discriminate with valid ones. - Return an enum from of_get_nand_ecc_algo(). - Drop OOB_FIRST placement scheme. - Introduce nand_extract_bits(). - Ensure a consistent bitflips numbering. - BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. - Fix nand_gpio_waitrdy(). - Propage CS selection to sub operations. - Add a NAND_NO_BBM_QUIRK flag. - Give the possibility to verify a read operation is supported. - Add a helper to check supported operations. - Avoid indirect access to ->data_buf(). - Rename the use_bufpoi variables. - Fix comments about the use of bufpoi. - Rename a NAND chip option. - Reorder the nand_chip->options flags. - Translate obscure bitfields into readable macros. - Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: - Fixed many error paths. - Arasan - New driver - Au1550nd: - Various cleanups - Migration to ->exec_op() - brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including . - Correctly verify erased pages. - Fix Hamming OOB layout. - Cadence - Make cadence_nand_attach_chip static. - Cafe: - Set the NAND_NO_BBM_QUIRK flag - cmx270: - Remove this controller driver. - cs553x: - Misc cleanup - Migration to ->exec_op() - Davinci: - Misc cleanup. - Migration to ->exec_op() - Denali: - Add more delays before latching incoming data - Diskonchip: - Misc cleanup - Migration to ->exec_op() - Fsmc: - Change to non-atomic bit operations. - GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. - Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. - Marvell: - Misc cleanup and small fixes - Nandsim: - Fix the error paths, driver wide. - Omap_elm: - Fix runtime PM imbalance. - STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes). SPI NOR core changes: - Add, update support and fix few flashes. - Prepare BFPT parsing for JESD216 rev D. - Kernel doc fixes. CFI changes: - Support the absence of protection registers for Intel CFI flashes. - Replace zero-length array with flexible-arrays" * tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits) mtd: clear cache_state to avoid writing to bad blocks repeatedly mtd: parser: cmdline: Support MTD names containing one or more colons mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match' mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones mtd: rawnand: Return an enum from of_get_nand_ecc_algo() mtd: rawnand: Drop OOB_FIRST placement scheme mtd: rawnand: Avoid a typedef mtd: Fix typo in mtd_ooblayout_set_databytes() description mtd: rawnand: Stop using nand_release() mtd: rawnand: nandsim: Reorganize ns_cleanup_module() mtd: rawnand: nandsim: Rename a label in ns_init_module() mtd: rawnand: nandsim: Manage lists on error in ns_init_module() mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup() mtd: rawnand: nandsim: Free erase_block_wear on error mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object mtd: rawnand: nandsim: Stop using nand_release() mtd: rawnand: nandsim: Free the partition names in ns_free() mtd: rawnand: nandsim: Free the allocated device on error in ns_init() mtd: rawnand: nandsim: Free partition names on error in ns_init() mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths ...

Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block

2020-06-02T22:29:19+00:00

Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...

Merge tag 'nand/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

2020-06-01T17:50:58+00:00

Raw NAND core changes: * Stop using nand_release(), patched all drivers. * Give more information about the ECC weakness when not matching the chip's requirement. * MAINTAINERS updates. * Support emulated SLC mode on MLC NANDs. * Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. * Take check_only into account. * Add an invalid ECC mode to discriminate with valid ones. * Return an enum from of_get_nand_ecc_algo(). * Drop OOB_FIRST placement scheme. * Introduce nand_extract_bits(). * Ensure a consistent bitflips numbering. * BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. * Fix nand_gpio_waitrdy(). * Propage CS selection to sub operations. * Add a NAND_NO_BBM_QUIRK flag. * Give the possibility to verify a read operation is supported. * Add a helper to check supported operations. * Avoid indirect access to ->data_buf(). * Rename the use_bufpoi variables. * Fix comments about the use of bufpoi. * Rename a NAND chip option. * Reorder the nand_chip->options flags. * Translate obscure bitfields into readable macros. * Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: * Fixed many error paths. * Arasan - New driver * Au1550nd: - Various cleanups - Migration to ->exec_op() * brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including . - Correctly verify erased pages. - Fix Hamming OOB layout. * Cadence - Make cadence_nand_attach_chip static. * Cafe: - Set the NAND_NO_BBM_QUIRK flag * cmx270: - Remove this controller driver. * cs553x: - Misc cleanup - Migration to ->exec_op() * Davinci: - Misc cleanup. - Migration to ->exec_op() * Denali: - Add more delays before latching incoming data * Diskonchip: - Misc cleanup - Migration to ->exec_op() * Fsmc: - Change to non-atomic bit operations. * GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. * Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. * Marvell: - Misc cleanup and small fixes * Nandsim: - Fix the error paths, driver wide. * Omap_elm: - Fix runtime PM imbalance. * STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes).

mtd: Fix typo in mtd_ooblayout_set_databytes() description

2020-05-31T08:53:41+00:00

Fix a probable copy/paste error: the function works like mtd_ooblayout_set_bytes(), not *_get_bytes(). Signed-off-by: Miquel Raynal Reviewed-by: Boris Brezillon Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-2-miquel.raynal@bootlin.com

mtd: Fix mtd not registered due to nvmem name collision

2020-05-18T20:04:07+00:00

When the nvmem framework is enabled, a nvmem device is created per mtd device/partition. It is not uncommon that a device can have multiple mtd devices with partitions that have the same name. Eg, when there DT overlay is allowed and the same device with mtd is attached twice. Under that circumstances, the mtd fails to register due to a name duplication on the nvmem framework. With this patch we use the mtdX name instead of the partition name, which is unique. [ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data' [ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13 [ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019 [ 8.948994] Call Trace: [ 8.948996] dump_stack+0x50/0x70 [ 8.948998] sysfs_warn_dup.cold+0x17/0x2d [ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0 [ 8.949002] bus_add_device+0x74/0x140 [ 8.949004] device_add+0x34b/0x850 [ 8.949006] nvmem_register.part.0+0x1bf/0x640 ... [ 8.948926] mtd mtd8: Failed to register NVMEM device Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API") Signed-off-by: Ricardo Ribalda Delgado Acked-by: Miquel Raynal Signed-off-by: Richard Weinberger

mtd: Add support for emulated SLC mode on MLC NANDs

2020-05-11T07:51:41+00:00

MLC NANDs can be made a bit more reliable if we only program the lower page of each pair. At least, this solves the paired-pages corruption issue. Signed-off-by: Boris Brezillon Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-5-miquel.raynal@bootlin.com

bdi: remove the name field in struct backing_dev_info

2020-05-09T22:15:13+00:00

The name is only printed for a not registered bdi in writeback. Use the device name there as is more useful anyway for the unlike case that the warning triggers. Signed-off-by: Christoph Hellwig Reviewed-by: Jan Kara Reviewed-by: Greg Kroah-Hartman Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe

bdi: simplify bdi_alloc

2020-05-09T22:15:13+00:00

Merge the _node vs normal version and drop the superflous gfp_t argument. Signed-off-by: Christoph Hellwig Reviewed-by: Jan Kara Reviewed-by: Greg Kroah-Hartman Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe

mtd: implement proper partition handling

2020-03-11T13:49:30+00:00

Instead of collecting partitions in a flat list, create a hierarchy within the mtd_info structure: use a partitions list to keep track of the partitions of an MTD device (which might be itself a partition of another MTD device), a pointer to the parent device (NULL when the MTD device is the root one, not a partition). By also saving directly in mtd_info the offset of the partition, we can get rid of the mtd_part structure. While at it, be consistent in the naming of the mtd_info structures to ease the understanding of the new hierarchy: these structures are usually called 'mtd', unless there are multiple instances of the same structure. In this case, there is usually a parent/child bound so we will call them 'parent' and 'child'. Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200114090952.11232-1-miquel.raynal@bootlin.com